Contact us
Close contact box

MTX RZRSYSTEM3

Audio upgrade kit for select 2014-17 Polaris RZR models: includes digital media receiver, two speaker pods, two bar speakers, amp, and powered sub

Item # 236RZRSYS3

Want to play your favorite tunes when you're playing in the dirt? MTX Audio's RZRSYSTEM3 is a great way to add...

Find what Fits your car

Want to play your favorite tunes when you're playing in the dirt? MTX Audio's RZRSYSTEM3 is a great way to add...

California customers:
Please click here for your Proposition 65 warning.

Need help?
Contact our Virginia-based experts.
Discontinueditem
1 question - 1 answer

Item # 236RZRSYS3

About the MTX RZRSYSTEM3

Rock harder with a full sound system

Want to play your favorite tunes when you're playing in the dirt? MTX Audio's RZRSYSTEM3 is a great way to add Bluetooth audio and outstanding sound to your ATV. This receiver/speaker combo includes the receiver, four speakers, an amp, and a powered sub, plus a dash kit and speaker wire.

Rock harder with a full sound system

Want to play your favorite tunes when you're playing in the dirt? MTX Audio's RZRSYSTEM3 is a great way to add Bluetooth audio and outstanding sound to your ATV. This receiver/speaker combo includes the receiver, four speakers, an amp, and a powered sub, plus a dash kit and speaker wire.

Bluetooth and more

The compact, IP66 water-resistant WET-MC3 receiver works with iPhones® and Android® smartphones and tablets. In addition to built-in Bluetooth, the WET-MC3 also includes an AM/FM/WB tuner, an AUX input, and a charging USB input, along with a connection for a SiriusXM satellite radio tuner.

Whether you're on the water or in the woods, you can see what's playing with just a glance at the 3" full-color TFT display. MTX added an auto dimming feature, too, so you can read the display in all lighting conditions. The big, soft- touch buttons are easy to use, even when you're wearing gloves – an especially handy thing for ATV riders.

Four trail-tough speakers

Designed specifically for select Polaris RZR models, MTX's RZRPOD65 speaker pods mount directly into existing dash locations, so you can install them without cutting or drilling. The speakers are right up front where they need to be for maximum volume and clarity. Each polypropylene pod houses a weather-resistant coaxial 6-1/2" speaker and has a durable finish that blends right into your RZR's interior.

Out back, you'll mount a pair of MUD65P 6-1/2" roll bar speakers. These marine-rated speakers handle up to 50 watts RMS, and they're housed in rugged enclosures designed to mount to the roll cage of your Polaris RZR ATV. Low-profile mounts let you choose the best angle for you, and built-in red LED lights will let your fellow riders know you're coming. But they'll probably hear you first!

Extra oomph from an amp

The MTX MUD100.4 full-range amp gives what you want from an ATV amp – outstanding sound quality and excellent thermal efficiency. This 4-channel, Class D amp pumps out 50 watts RMS power per channel, so you'll have the juice you need for all four speakers.

Bring on the bass

MTX's RZRXP-10 powered subwoofer enclosure brings outstanding bass performance to your Polaris RZR ATV without taking up extra passenger room. A built-in 250-watt amp ensures maximum thump from its 10" sub, and the compact enclosure mounts directly under the dash using existing mounting locations, so you won't have to worry about cutting or drilling into your RZR.

Bluetooth note: Use of this receiver's Bluetooth features will depend upon your phone's Bluetooth capabilities. Learn more in our article explaining Bluetooth profiles.

iPod®/smartphone note: If you're going to use your iPod or smartphone with this receiver, be sure to check "Details" for compatibility information.

READ LESS

Product highlights:

    General Features:
    • WET-MC3 digital media receiver, RZRPOD65 speaker pods, MUD65P 6-1/2" bar speakers, MUD100.4 amp, and powered sub
    • also includes MTX MUDRZRDK direct fit dash kit and MTX SCP1850BL speaker wire
    • fits select Polaris RZR ATV models
    Receiver Features:
    • marine digital media receiver with AM/FM tuner (does not play CDs)
    • built-in amplifier (20 watts RMS/50 peak x 4 channels)
    • built-in Bluetooth for music streaming (will not make calls)
    • works with Apple and Android smartphones
    • 3" full-color TFT display
    • inputs: rear USB and AUX
    • outputs: 4-channel preamp outputs (2-volt front and rear)
    • SiriusXM satellite radio ready
    • IPX-66 water-resistant
    Speaker Features:
    • RZRPOD65 6-1/2" speaker pods handle up to up to 65 watts RMS (130 watts peak)
    • MUD65P 6-1/2" bar speakers handle up to 50 watts RMS (100 watts peak)
    • all speakers are designed for marine and off-road use
    Amp Features:
    • 50 watts RMS x 4 channels at 4 ohms (100 watts x 4 at 2 ohms)
    • marine-rated amp for ATV or boat use
    • conformal-coated circuit board resists moisture
    • compact design is ideal for your Polaris RZR ATV
    • high- and low- pass crossovers
    Subwoofer Features:
    • 10" subwoofer and 250-watt integrated amplifier
    • wired remote bass level control
    • 16' power/ground wire
    Other Info:

    What's in the box:

    • AWMC3: Digital media receiver
    • Wiring harness
    • Trim-ring
    • Mounting plate
    • Mounting bracket
    • 4 Machine screws
    • 4 Self-tapping screws
    • 4 Hex nuts
    • Owner's Manual
    • RZRPOD65:
    • 2 Speaker pods (attached 12" speaker wires)
    • 2 Brackets
    • 4 Screws
    • 4 Washers
    • 4 Long strips of two-sided tape
    • 2 Short strips of two-side tape
    • MUDRZRDK:
    • Dash kit
    • 2 Bolts
    • 4 Washers
    • 2 Speed-clips
    • Hex-key
    • Owner's Manual
    • MUD100.4:
    • 4-channel amplifier
    • 12" Input/Output harness
    • One 15-amp ATO fuse (installed)
    • Four 3/4" Self-tapping screws
    • Owner's manual
    • RZRXP-10:
    • Powered subwoofer enclosure
    • External bass control knob
    • 3 Torx screws
    • MUD65P:
    • 2 Tower speakers
    • RZRHARNESS2:
    • System harness
    • Fuse holder
    • 60A fuse
    • Screw
    • 2 Cable clamps
    • 2 Wire-ties

    Customer reviews

    We don't have any reviews, yet.
    Submit a review and then enter to win a $350 rewards card.
    Be the first to review this product

    Loading reviews...

    Thanks for submitting your review

    Filter by rating

    Customer photos

    Sort reviews

    Sort by:
    Items per page:
    View page:

    Verified customer (What's this?)
    Verified employee purchase (What's this?)

    Pros:

    Cons:

    Crutchfield response

    << >>

    More details on the MTX RZRSYSTEM3

    Stacey B.

    Product Research

    Polaris RZR Audio System
    Receiver & Dash Kit
    Speaker Pods

    Polaris RZR Audio System

    Vehicle Compatibility: The MTX RZRSYSTEM3 Polaris RZR Audio System is designed specifically to fit select Polaris RZR XP1000 and 900 models (without cutting or drilling). It combines a stock factory appearance with aftermarket MTX sound performance.

    Make Model Year
    Polaris RZR XP/XP4 1000 2014-2017
    RZR XP/XP4 Turbo 2016-2017
    RZR 900/900S/100S 2015-2017
    RZR 4 900 EPS 2015-2017

    All Weather Design (IP66 Rated): Each component of the RZRSYSTEM3 is designed to withstand anything you may encounter in nature along your ride - including wind, sand, rain, snow, sleet, and any other kind of bad weather you might find yourself riding in. The included digital media receiver can be used in any environment and its large rubber buttons make it easy to operate under even the most adverse conditions. The supplied dash speaker pods and subwoofer enclosure are rotationally molded ensuring they are extremely durable. The included tower speakers are also weather resistant and highly durable with a UV inhibitor. The amplifiers in the system are weather resistant and include covers for all controls that prevent moisture intrusion.

    System Harness: The included system harness (RZRHARNESS) is cut to length and easily connects all the components together (including the digital media receiver, stereo amplifier, speaker pods, and powered sub), so you spend less time installing the audio system and more time enjoying it. The system harness will require connection to your ATV's battery power & ground.

    Receiver & Dash Kit

    Dash Kit: The included custom-fit dash kit (MUDRZRDK) is designed specifically to allow installation of the AWMC3 digital media receiver in select Polaris RZR side-by-side vehicles. The MUDRZRDK fits in the space occupied by the factory pocket found in the dashboard allowing for easy installation and a stock look.

    3" Display w/ Large Buttons: The digital media receiver (AWMC3) features a 3" full color TFT display with auto or manual dimming for better visibility. It also offers large backlit soft-touch buttons that are easy to use even while wearing gloves.

    2V/4Ch Pre-Outs: The digital media receiver is outfitted with two sets of 2-volt pre-outs (front & rear) for connecting the included stereo amplifier (MUD100.4) and powered subwoofer (RZRXP-10) using the included system harness.

    20W x 4Ch Amplifier: The digital media receiver features a built-in 20W (RMS)/50W (Peak) x 4Ch amplifier for connection of two pair of speakers.

    Customizable EQ: You can customize the receiver's sound through selectable EQ Presets (Classic, Jazz, Rock, Pop, Optimal, Custom). The Custom mode allows you to manually adjust the 8-band EQ (62, 125, 250, 500, 1k, 4k, 10k, 16k Hz). There is also balanced and fade control.

    Bluetooth Audio Streaming: Thanks to built-in Bluetooth, you can stream stored music and music apps on your Bluetooth source device to the digital media receiver. You'll also get basic playback controls (like Play/Pause & Previous Next Track), along with song/artist info and album art display. If you have an Apple 5S and up device, you can even browse your Bluetooth music by song/artist/playlist from the receiver. Only one Bluetooth source device can be paired and connected at a time.

    Note: This unit does not offer Bluetooth hands-free phone communication for answering and making phone calls.

    USB MSC Playback: The unit's rear-panel USB (type-A) port allows playback of MP3 music files from a USB MSC (mass storage class) device, like a USB thumbdrive or portable digital audio player. You'll get basic playback control (Play/Pause & Previous/Next Track) and the display of song/artist info with album art on the receiver. The unit will also charge your connected portable digital audio player.

    Note: The unit's USB port does not support Android devices.

    iPod/iPhone Compatible: The receiver's USB port can also be used to connect your Apple iPod or iPhone with Lightning connector (not compatible with 30-pin devices). Simply use the cable that came with your Apple Lightning device or a 3rd party Apple certified Lightning-to-USB cable (sold separately). The unit supports audio playback of stored music and music apps, music navigation (song/artist/album/playlist), song/artist info with album art, and charging of your compatible Apple Lightning device.

    Apple Device Generation Tested Version Media Type Control Type Display Type Bluetooth Charge
    Audio Video Head Unit iPod/iPhone Album Art Artist/Song Text Track Info Phone Audio
    iPhone
    SE 10.3.3 Y N Y Y Y Y Y N Y Y
    5/5C/5S 10.3.3 Y N Y Y Y Y Y N Y Y
    6/6+/6S/6S+ 10.3.3 Y N Y Y Y Y Y N Y Y
    7/7+ 10.3.3 Y N Y Y Y Y Y N Y Y
    touch
    5th 9.3.5 Y N Y Y Y Y Y N Y Y
    6th 10.3.3 Y N Y Y Y Y Y N Y Y
    nano
    7th 1.02 PC Y N Y N Y Y Y N Y Y
    Note: Apple iPod/iPhone software updates may change functionality results. If you download a newer software version, you may need to reset the head unit and your iPod/iPhone to regain functionality. If this doesn't work, you may need to wait until a newer software update is available.

    AM/FM/WB Tuner: The receiver features a built-in AM/FM tuner with manual, seek, and preset (12AM/18FM) tuning. You can choose between US or European tuning. A Local option tunes to only nearby radio stations with sufficiently strong signals for good reception. The unit is also equipped with a built-in weather band tuner. Select from weather band frequencies between 162.4 to 162.55.

    SiriusXM Ready: The digital media receiver is SiriusXM-Ready and compatible with the SiriusXM Connect Vehicle Tuner (220SXV300 sold separately), so you can listen to over 140 SiriusXM channels. SiriusXM subscription required. The unit offers manual, seek, preset (up to 18), direct, and category tuning. It also provides parental control to block unsuitable content.

    Note: A separate SiriusXM Satellite Radio subscription is required (operates on the XM Network). However, you can easily add this SiriusXM tuner to an existing Sirius or XM account for a Multi-Radio Discount Plan.

    Aux Input: The MTX digital media receiver is fitted with a rear-panel stereo RCA AUX input to connect an external audio source.

    Amp, Speakers & Powered Sub

    Speaker Pods: The RZRPOD65 all weather custom fit speaker pods mount to the vehicle's roll cage and are contoured to fit perfectly on the dash of select Polaris RZR models (requires no cutting or drilling). This mounting location is ideal for sound staging as the speakers mount directly in front of the driver and passenger ensuring music can be heard clearly even at high speeds. Each pod includes a weather resistant 6.5" coaxial speaker featuring a polypropylene cone woofer and clear Teteron tweeter that deliver exceptional full range clarity.  The speakers feature all-weather construction with a UV inhibitor.

    • Power Handling: 65W (RMS) / 130W (Peak)
    • Sensitivity: 90.7dB (1W/1m) / 95dB (2.83V/1m)
    • Frequency Response: 85Hz to 22kHz
    • Impedance: 4 Ohm

    Tower Speakers: Each MUD65P tower speaker enclosure is designed to mount to the roll cage (1.5", 1.75", or 2") of your Polaris RZR. Each tower speaker houses a 6.5" coaxial speaker with a polypropylene woofer and dome tweeter that are both weather resistant to withstand the elements including dirt, mud, rain, and snow. The included low profile mounts allow the speakers to be attached at multiple angles allowing for the best imaging for the listener. Additionally, a red LED is included in the grille of each speaker allowing them to be lit up so other riders will not only hear you coming but will see you coming as well.

    • Power Handling: 50W (RMS) / 100W (Peak)
    • Sensitivity: 86dB
    • Impedance: 4 Ohm

    4-Channel Amplifier: The MTX MUD100.4 is a powerful, yet compact, 4ch amplifier that features full-range class D topology to deliver exceptional sound quality and excellent thermal efficiency. The entire amp is weather resistant including a conformal coated circuit board and control covers that prevent damage from moisture intrusion. The 4ch amplifier is used to drive the speaker pods and tower speakers.

    • Power Output: 50W x 4Ch (4 ohm) / 100W x 4Ch (2 ohm) / 200W x 2Ch (4 ohm bridged)
    • Frequency Response: 10Hz to 32kHz
    • THD: <1.0%
    • Sensitivity Range: 200mV to 5V
    • Crossover: Fixed HPF or LPF @ 80Hz, 12dB/Oct
    Note: You will use the included system harness to hookup the amplifier to your vehicle's battery, the digital media receiver, and the speaker pods; instead of the amplifier's input/output harness (no additional amplifier kit is needed).

    Powered Subwoofer: The RZRXP-10 powered sub is designed to give you bass in your Polaris RZR without losing any of your space. This powered sub includes a 10" polypropylene cone woofer and 250W built-in amp that delivers exceptional low frequency output. The custom designed enclosure mounts under the dashboard and once installed, is nearly invisible (no cutting or drilling). There is an external wired bass level control to fine-tune the powered subwoofer's output.

    • Power Handling: 250W (RMS) / 500W (Peak)
    • Frequency Response: 34Hz to 120Hz
    Note: You will use the included system harness to hookup the powered subwoofer to your vehicle's battery and the digital media receiver (not additional amplifier kit is needed).

    Durable Enclosures: The speaker pods and subwoofer enclosure are constructed using rotationally molded  linear low density polyethylene (LLDPE) which creates a finish that is weather resistant and durable. The ABS tower speaker enclosures are highly durable and include a UV inhibitor that will prevent them from fading over time.

    Loading accessories...

    Customer Q&A

    1 question already asked

    Q
    will this fit a polaris rzr 4 1000 turbo?
    [ Marc  Feb 04, 2018 ]
    1 answer
    A
    This will work with some of those UTV's! I recommend contacting an advisor on 1-800-324-9695 to check your specific one My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101
    [ Paul  Feb 09, 2018 ]  Staff

    Loading articles...

    TOP