About the MTX Thunder6000 T6104
Looking for some big-time sound? The MTX Thunder6000 series T6104 10" subwoofer features an oversized magnet structure, 2" four-layer voice coil, and rugged NBR (Nitrile Butadiene Rubber) rubber surround it's built to pump deep, low bass.
Asymmetrical Linear Drive System (ALDS) combines a flat, progressive spider with an extended, vented pole piece to maximize performance and minimize distortion. The injection-molded poly cone is reinforced by 8 stiffening ribs for improved power handling (and great looks). Can you say "Bruiser?" 1-year warranty.
- injection-molded poly cone
- Nitrile Butadiene Rubber surround
- frequency response 31-150 Hz
- power range 50-250 watts RMS
- peak power handling 500 watts
- sensitivity 85.5 dB
- top-mount depth 5"
- sealed box volume 0.75 cu. ft.
- ported box volume 1.5 cu. ft.
Thanks for submitting your review
More details on the MTX Thunder6000 T6104
Features & specs
|Surround Material||Nitrile Butadiene Rubber|
|Ideal Sealed Box Volume (cubic feet)||0.75|
|Ideal Ported Box Volume (cubic feet)||1.5|
|Port diameter (inches)||3|
|Port length (inches)||11|
|Dual Voice Coil||No|
85.5 dB at 1 watt |
|Frequency Response||31 - 150 Hz|
|Max RMS Power Handling||250|
|Peak Power Handling (Watts)||500|
|Top Mount Depth (inches)||5|
|Bottom Mount Depth (inches)||5 7/16|
|Cutout Diameter or Length (inches)||9 1/4|
|Parts Warranty||1 YEAR|
|Labor Warranty||1 YEAR|
NBR Surround: The woofer is made with a one-piece NBR (Nitrile Butadiene Rubber) surround and gasket combination. When bottom-mounting the woofer, the one-piece surround and gasket make an air-tight seal, to prevent any loss of performance due to air leaks around the woofer. When the woofer is top-mounted, the one-piece surround and gasket combination enhances the overall cosmetic appearance of the woofer. NBR has the added benefit of being resistant to ozone and UV rays for extreme durability.
Cone Cosmetics and Materials: The woofer cone is made of injection-molded silver-colored poly with 8 stiffening ribs for improved cone stiffness and higher mechanical power handling. Concentric rings are molded into the cone and dust cap surfaces to give them a machined appearance. "MTX Audio" is embossed on the poly dust cap.
Oversized Magnet Structure: This woofer has an oversized magnet structure, made with a 28 oz. Strontium Ferrite magnet.
Four-layer Voice Coil: A 2" four-layer voice coil is used for higher power handling.
Asymmetrical Linear Drive: This system improves linearity and permits high output with low distortion.
Extended Vented Pole Piece: The extended vented pole piece provides a more symmetrical magnetic field.
Enclosure Compatibility: This woofer can provide extended bass in sealed, vented and bandpass enclosures (see below for more information on enclosures).
Recommended Sealed Box Volume: The sealed box sizes recommended by MTX range from 0.5 cu/ft to 1.0 cu/ft. The sealed enclosure MTX highlights on their spec sheet is a 0.75 cu/ft enclosure, so this is the enclosure recommended by Crutchfield.
Vented Box Volume: The vented box sizes recommended by MTX range from 1.0 cu/ft to 2.0 cu/ft. The vented enclosure MTX highlights on the woofer specification sheet is a 1.5 cu/ft enclosure, so this is the enclosure recommended by Crutchfield. One 3" diameter x 11" long port should be used with a 1.5 cu/ft enclosure; a 1.5 cu/ft enclosure with a 3"x 11" port has a tuning frequency of 32 Hz.
Single Reflex Bandpass Volume: The bandpass box sizes recommended by MTX range from 0.99 cu/ft to 1.73 cu/ft. MTX highlights two bandpass enclosures on the woofer specification sheet. One highlighted enclosure has an "S" value of 0.6, and the other highlighted enclosure has an "S" value of 0.7. The highlighted bandpass enclosure with an "S" value of 0.6 is a 1.13 cu/ft enclosure, with a sealed chamber volume of 0.38 cu/ft, a vented chamber volume of 0.62 cu/ft and a single 4" diameter x 9.5" long port. The enclosure with an "S" value of 0.7 is a 1.42 cu/ft enclosure, with a sealed chamber volume of 0.46 cu/ft, a vented chamber volume of 0.85 cu/ft and a single 4" diameter x 7.5" long port.
Note: The bandpass enclosure with the higher "S" value produces a more narrow bandwidth with better transient response; the enclosure with the lower "S" value produces a wider bandwidth at the expense of transient response.