About the MTX Amplified ThunderForms
Crinkled french fries, discarded receipts, old gum wrappers you probably have everything in the hidden corners of your vehicle except great bass. ThunderForm enclosures fill the nooks and crannies of your vehicle with low tones that stand out, but their factory look blends right in.
MTX engineers evaluate the "sonic signatures" of top-selling vehicles so they can design ThunderForms as custom acoustic matches. Each ThunderForm fits and blends inconspicuously into your vehicle, so you get great bass without losing any space. They're made of high-density polyethylene resin to curb resonances they deliver bass that's tight, hard-hitting, and way down low. The airtight enclosure provides the correct internal volume to yield optimum bass response.
This molded MTX ThunderForm comes loaded with two premium-quality 10" Terminator subwoofers modified especially for amplified Thunderforms, with a specially-designed amp that puts out 200 watts of power. It fits behind the rear seat of your 1997-06 Jeep Wrangler. The enclosure is seamless and airtight, with the correct internal volume to yield optimum bass response from the subwoofers. Hardware is included.
- custom-fit powered subwoofer
- enclosure fits behind rear seats
- two Terminator 10" subwoofers
- built-in 200-watt RMS amplifier
- high-density polyethylene enclosure
- variable low-pass filter (50-150 Hz at 12 dB per octave)
- preamp- and speaker-level inputs
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # JWTJ97T20A-TN
What's in the box:
- Amplified ThunderForm enclosure loaded with two 10" Terminator subwoofers
- Two 20 amp fuses (1 in-line/1 installed in the ThunderForm)
- Wiring harness (20' power lead/3' ground lead and 3' remote turn-on lead)
- Speaker-level to RCA harness
- Electronic Bass Control (wired remote) with attached cable
- Mounting hardware
- Installation instructions
MTX Amplified ThunderForms reviews
A lot of sound, protective casing helps with theft and elements, perfect fit.
1 of 1 found this helpful
I purchased the powered MTX Thunderform. The idea is fantastic - the box fit perfectly and looks sleek. But, whatever is inside is not secure and rattles around. The first box worked and sounded great for a day; then stopped pushing sound. Power indicator was on - no sound. I was sent a second box a week later and it too had internals rattling around and it would not power up. I'm sending both back for a full refund. I'm assuming the standard box without amp is a better option - but, I'm done with MTX.
Pros: Fits perfect in my 2006 Jeep TJ. Looks sleek and purpose built.
Cons: Poor quality build internally - there should be nothing moving inside a speaker box.
4 of 4 found this helpful
Waste of money. Terrible quality and sound.
Cons: Everything else
1 of 1 found this helpful
Easy install kept this from being a 1 rating. Beyond that, I can only say that I expected more from MTX. At first the speakers sounded great. This stopped on the second day. All function stopped. I thought that maybe the speakers had a loose wire. This was not the case. The speaker is filled with one layer of matting. The internal components are held in place using adhesive that fails to hold. Internal components ended up wrapped inside the matting. The shoddy application of adhesive allowed the internal components to bounce around freely inside the box.
Pros: Easy install
Cons: Shoddy manufacturing
2 of 2 found this helpful
Very easy to install. Adds a very good bass note even with the top down.
Pros: Easy install, great sound
Cons: As expected, cargo room goes away.
1 of 1 found this helpful
More details on the MTX Amplified ThunderForms
Vehicle-Specific Custom Enclosure: This MTX ThunderForm enclosure is specifically designed to fit select 1997-2006 Jeep Wranglers. Please refer to the Crutchfield Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded high-density polyethylene resin, which dampens resonance and is rigid enough to resist flexing. It is an acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is designed to mount behind the rear seat. The rear seat will still fold/flip. Note: The provided dimensions are taken at the widest points of the enclosure. Keep in mind that these enclosures are custom made to fit in this particular vehicle, so the enclosure will fit properly in only one specific location.
10" Terminator Subwoofers: This enclosure comes loaded with two 10" MTX Terminator subwoofers. The woofers have an unusual impedance, specifically designed for the built-in amp, and cannot be replaced with standard MTX models.
Class D Amplifier: The enclosure contains a built-in 200-watt Class D (digital) amplifier that allows RCA or speaker-level input. The amplifier is highly efficient and designed specifically for use with the subwoofers in the enclosure.
Electronic Bass Control (EBC): The EBC is a wired remote and allows you to adjust the bass level from anywhere in the vehicle. Installing the EBC is optional.
Low-pass Crossover: The low-pass crossover point is adjustable from 50 to 150 Hz for a seamless transition between the output of this unit and that of the other speakers in the vehicle.
- Gain Control: rotary control; set the gain of the amplifier is match the input
- Crossover Control: rotary control; adjust the crossover from 50 to 150 Hz
Auto Turn-On Feature: When speaker level inputs are used, the system will automatically turn on and off with the radio.
Note: The auto turn-on feature does not operate when preamp level inputs are used, connecting the remote turn-on lead is required.
Tools Required: The manual provides this list of required tools:
- Powered Screwdriver
- Phillips Head Screwdriver
- 6" Bit Extension
- 10mm Wrench
- Wire Ties
- Utility Knife
- Right Angle Skewdriver
2 questions already asked