About the MTX ThunderForms
Crinkled french fries, discarded receipts, old gum wrappers — you probably have everything in the hidden corners of your vehicle except great bass. But with custom ThunderForm enclosures, you can fill the nooks and crannies of your car, truck, or SUV with low tones that stand out.
MTX engineers evaluate the "sonic signatures" of top-selling vehicles so they can design ThunderForms as custom acoustic matches. With "rotational molding," MTX ensures that each ThunderForm fits and blends inconspicuously into your vehicle. They're made of high-density polyethylene resin to curb resonances and deliver bass that's tight, hard-hitting, and way down low. The enclosure is seamless and airtight, with the correct internal volume to yield optimum bass response from the subwoofer.
This molded MTX ThunderForm comes loaded with a premium-quality 10" Terminator speaker and mounts behind the driver's seat of a standard cab 1996-2004 Toyota Tacoma truck (with bench or bucket seats). There is no loss of leg room, but the factory jack arm must be relocated. For the ultimate in Thundering bass, drive one with an MTX Thunder amp.Installation Note: When this ThunderForm is installed in a truck with bucket seats, the carpeted rear cover must be removed from the vehicle. This installation requires drilling an 11/64" hole in the cab wall.
- custom-fit subwoofer
- rugged enclosure fits behind driver's seat
- one 10" 4-ohm Terminator Series subwoofer
- high-density polyethylene enclosure
- power range 50-200W RMS
- frequency response 41-150 Hz
- dimensions: 33"W x 16-11/16"H x 8"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # TTP10T-TN
What's in the box:
- ThunderForm enclosure loaded with one 10" Terminator subwoofer
- Mounting hardware
- Installation instructions
Thanks for submitting your review
More details on the MTX ThunderForms
Vehicle-Specific Custom Enclosure: This MTX ThunderForm enclosure is specifically designed to fit select 1996-2004 standard cab Toyota Tacoma pickups. Please refer to the Crutchfield Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded high-density polyethylene resin, which dampens resonance and is rigid enough to resist flexing. It is an acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is mounted behind the driver's seat. Retaining clips are provided to relocate the jack handle. Note: The provided dimensions are taken at the widest points of the enclosure. Keep in mind that these enclosures are custom made to fit in this particular vehicle, so the enclosure will fit properly in only one specific location.
Woofers: The ThunderForm enclosure is loaded with one 4Ω, 10" MTX Terminator subwoofer.
Tools Required: The manual provides this list of required tools:
- Powered Screwdriver
- #2 Phillips Head Bit
- 8mm Wrench
- 7/16" Wrench
- 11/64" Drill Bit
- Wire Cutters
- Terminal Crimpers
Note: The manual provided is for both the amplified and non-amplified versions of this ThunderForm. Some of the tools may not be needed for this non-amplified ThunderForm.