About the MTX WET77-W
Sound on the waves
Sound on the waves
Marine applications pose unique challenges for speakers. There's water, salt spray, long hours of sunlight and temperature extremes that can ruin car speakers in no time. For marine applications, you need a speaker that's designed to cope with these challenges and built with the toughness to overcome them. MTX's Wet Series speakers can give you the dependability and great sound you crave.
MTX seals this speaker so it can't be damaged by moisture.
Built to perform
MTX's WET77-W 7-3/4" marine speakers feature a durable, waterproof polypropylene cone that'll stand up to humidity and UV exposure. A tough, sealed white ABS plastic basket protects each speaker's internal motor structure against corrosion, while the sharp-looking white grille will keep its looks while protecting the speaker from onboard mishaps.
The WET77-W speakers will handle up to 75 watts RMS, or 150 watts peak power. Their weatherproof construction makes them ideal as well for ATVs and other off-road vehicles too.
- 7.7" coaxial marine speakers (pair)
- polypropylene cone
- power handling: 75 watts RMS (150 watts peak)
- frequency response: 50-20,000 Hz
- impedance: 4 ohms
- mounting depth: 3"
- cutout diameter: 6-1/4"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # WET77-W
What's in the box:
- Two 2-way marine speakers
- 2 White ASA plastic grilles
- Eight 1-1/2" Stainless steel screws
- 8 Stainless steel speed clips
- Two 4-1/2" Zip ties
- Warranty information
- Specifications printed on the box
More details on the MTX WET77-W
Features & specs
|Tweeter Design||1" Dome|
|Tweeter Composition||Treated Silk|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
87.5 dB at 2.83 volts |
|Frequency Response||54 - 22k Hz|
|Max RMS Power Handling||75|
|Peak Power Handling (Watts)||150|
|Top-mount Depth (Inches)||3 1/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||6 5/16|
Marine Tested: The WET77-W is designed to be weather resistant and durable in conditions where water, humidity, or element exposure is prevalent. It features a polypropylene cone that is water resistant, a sealed ABS basket that protects the internal motor structure, silicone insulated tinsel leads, and ASA plastic grilles with UV inhibitor that are durable and that won't fade over time. Channels in the speaker frames and grilles allow any water splashed on the cone to drain.
Mounting Hardware: Marine-grade stainless-steel mounting screws are included.
Grille: Grilles are included, but the speakers can be installed without them. If the woofer is mounted with the grille, several measurements are different:
- Mounting Height: changes from 0.727" to 1"
- Flange Height: changes from 0.25 to 0.75"
- Frame Diameter: changes from 7.41" to 7.775"
Q Crutchfield asked: Why did you buy this?
1 question already asked