About the Crux CLR-10
Upgrade your Land Rover
You love your Land Rover, but with Crux's CLR-10 custom-fit backup camera installed, you're about to love it a whole lot more. Crux builds the wide-angle camera into a plate mount that fits in the overhang above your license plate. An included 20-foot cable connects to the back of an aftermarket radio with a composite video input. Once installed, you'll see a 170-degree wide picture of what's behind you on your radio's display or monitor like those built into select replacement rear-view mirrors with a composite video input.
- vehicle-specific waterproof CCD camera
- replacement rear-view camera compatible with select Land Rover vehicles
- mounting plate fits in the overhang above your license plate
- 20' extension video cable included
- resolution: 480 TV lines
- 170° wide viewing angle
- parking lines (selectable at installation)
- illumination: 0.2 Lux minimum for night driving
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # CLR-10
What's in the box:
- Volvo rear-view camera w/ light bulb assembly (no light bulb included)
- 20' Video cable (attached 3' power/ground wires)
Crux CLR-10 reviews
Thanks for submitting your review
More details on the Crux CLR-10
Land Rover Rear-View Camera: The Crux CLR-10 Land Rover rear-view camera is specifically designed for select Land Rover vehicles with an aftermarket in-dash multimedia or navigation receiver installed. Your aftermarket receiver must feature an integrated video monitor and a composite video camera input. The CLR-10 replaces the light bulb assembly above your rear-mounted license plate (light bulb is not included; you will still use the light bulb out of your factory light bulb assembly). With the Crux CLR-10 Land Rover rear-view camera installed, you'll be able to view what's behind you on your in-dash aftermarket receiver's video monitor when you put your vehicle in reverse.
|Range Rover Sport||2004-2013|
Note: This rear-view camera is meant as a back-up aid only; never solely rely on the rear-view camera when backing-up. In addition to using the rear-view camera, always look behind you to make sure everything is clear when backing up your vehicle.
Image Sensor & Lens: The Crux CLR-10 Land Rover rear-view camera features a CCD image sensor that offers 480 lines of resolution. The bright f/1.8 lens has 170° (horizontal) x 90° (vertical) viewing angle. The minimum illumination is 0.2 Lux.
Park Assist Lines: The rear-view camera provides parking assist lines on the screen of your vehicle's in-dash aftermarket monitor. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also 3 color-coded horizontal lines that are used to distinguish how close you are getting to the end of the parking spot - Green (Clear), Yellow (Getting Close), Red (Very Close).
Note: The park assist lines are turned on and active by default. If you prefer to turn off the park assist lines, you will need to cut the white wire loop on the the attached power/video cable of the rear-view camera.
Connections: The rear-view camera features an attached 4' power/video cable which plugs into the included 20' video cable which also features attached 3' power/ground wires. At the end of the video cable is a male RCA composite video plug, which connects to the composite, rear-view camera input of your aftermarket head unit. The power (red) & ground (black) wires will need to be hardwired. 12V power can be obtained from your vehicle's reverse light circuit or from the reverse gear wire of your aftermarket stereo (if applicable). The ground will need to connected to your vehicle's metal chassis. In addition there are separate power and ground wires attached to rear-view camera that will need to be hardwired into your vehicle's license-plate lighting circuit.
Waterproof Housing: The Crux CLR-10 Land Rover rear-view camera features an IP67-IP68 waterproof housing.
1 question already asked