About the Crux CS-GM31L Wiring Interface
Upgrade your radio
Upgrade your radio
Crux's CS-GM31L interface ensures that you can keep the factory steering wheel controls in your GM vehicle when installing a compatible aftermarket radio. Connect this interface to the wires on your new stereo's wiring harness, and you've covered the power, ground, and factory speaker connections for your new stereo. You'll also retain your vehicle's safety chimes, backup camera, rear seat entertainment system, and retained accessory power (RAP).
Note: The CS-GM31L interface allows you to keep your steering wheel controls with radios from Alpine, Blaupunkt, Boss, Clarion, Dual, Jensen, JVC, Kenwood, Pioneer, Sony, and Soundstream.
- connect a new stereo in select 2014-18 General Motors vehicles
- retain your steering wheel controls with compatible car stereos
- retains these vehicle functions:
- safety chimes
- backup camera
- rear seat entertainment system (RSE)
- retained accessory power (RAP)
- does not retain OnStar or Bose amplifier
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # CS-GM31L
What's in the box:
- Radio replacement interface
- Wiring harness
- SWC harness
- Installation Instructions
Crux CS-GM31L Wiring Interface reviews
Thanks for submitting your review
More details on the Crux CS-GM31L Wiring Interface
Radio Replacement Interface: The CRUX CS-GM31L is a radio replacement interface for select GM LAN V2 (LIN) Bus vehicles. It facilitates the integration of an aftermarket radio and enables retention of specific factory features (such as steering wheel controls) when replacing a factory installed radio in select GM vehicles.
Note: This interface does not retain the vehicle's factory OnStar or Bose amplifier, if equipped.
Vehicle Compatibility: The CRUX CS-GM31L radio replacement interface works with the following 2014-2018 GM LAN V2 (LIN) Bus vehicles.
|Chevrolet||Camaro (w/ 8" screen)||2016-218|
|Malibu (w/ 8" screen)||2018|
|Silverado (w/ 8" screen)||2018|
|GMC||Acadia (w/ 8" Screen)||2017|
|Sierra (w/ 8" Screen)||2017-2018|
Steering Wheel Controls: The CRUX CS-GM31L also features a steering wheel control output for Alpine, Blaupunkt, Boss, Clarion, Dual, Jensen, JVC, Kenwood, Pioneer, Sony, and Soundstream aftermarket head units. The steering wheel control output consists of a right-angle 3.5mm connector and a light blue/yellow wire (use the connection that your aftermarket head unit is outfitted with). The CS-GM31L interface module will work with any of the listed aftermarket head units, by setting its dip-switches (see owner's manual for appropriate setting).
Backup Camera w/ Reverse Gear Output: The CS-GM31L allows you to retain your GM vehicle's backup camera through the included backup camera harness with male composite video connector. Your in-dash aftermarket stereo must have a composite video camera input and a built-in video monitor. The radio replacement interface module also provides a Reverse Gear output for automatic rearview switching with your aftermarket receiver.
Note: The factory backup camera is only retained in vehicles with the RPO code IO3 factory radio. Otherwise, the factory backup camera will no longer function.
Retained Accessory Power (R.A.P.): The ignition power source of most GM vehicles keeps the radio on until one of the doors is opened; this feature is lost when replacing the factory radio with an aftermarket head unit without the proper installation accessories. The GS-GM31L is designed to retain the R.A.P. feature and keep the radio powered after the key is off, until the driver door is opened or the OEM timer ends; whichever happens first.
Warning Chimes: The Crux CS-GM31L retains factory warning & safety chimes through the use of an on-board speaker. The volume of the chime speaker is adjustable through a potentiometer on the interface module.
+12V Accessory Output: In many GM vehicles, there is no 12-volt accessory wire in the factory harness, which requires the installer to run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. The CS-GM31L is designed to provide a 12V/5A switched accessory output (red wire).
The Crux CS-GM31L Wiring Interface replaces these items
- designed for non-amplified factory systems or when bypassing the factory amp
- retains balance and fade controls