About the Crux CUL-09
Look back with confidence
Crux's CUL-09 backup camera will mount nicely on cars with a lip-style overhang built into the rear. Crux supplies a mount for the camera for a streamlined, flush look and a 23-foot cable to connect the camera to your receiver. Once installed, you'll gain a full color 170° view of what's behind you. You also get parking lines for easier reversing into tight spaces. And the Crux CUL-09 is a match for any car stereo with a standard composite video input and viewing screen.
- CCD backup camera with standard composite video connectivity
- compatible with any radio with an RCA video input (most aftermarket models, only a few factory)
- 23' video extension cable included
- two-screw flush mount
- 170-degree wide angle
- 480 TV lines
- waterproof plastic housing
- optional parking lines
- 0.4 Lux minimum for night driving
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # CUL-09
What's in the box:
- Rear-view camera w/ integrated bracket (attached 7' power/ground wires and 23.75' composite video cable)
- Wiring Sheet
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Crux CUL-09 reviews
Thanks for submitting your review
More details on the Crux CUL-09
Features & specs
|Features and Specs|
|Resolution||480 TV lines|
|Lux Rating||0.4 Lux (min)|
|Horizontal Viewing Angle||170 deg|
|Vertical Viewing Angle||90 deg|
|Plug type||Composite video|
Rear-View Camera: The Crux CUL-09 rear-view camera can be installed in a variety of vehicles with an aftermarket in-dash multimedia or navigation receiver installed. Your aftermarket receiver must feature an integrated video monitor and a composite video camera input. Now you'll be able to view what's behind you on your in-dash receiver's video monitor when you put your vehicle in reverse.
Note: The Crux CUL-09 rear-view camera is meant as a back-up aid only; never solely rely on the rear-view camera when backing-up. In addition to using the rear-view camera, always look behind you to make sure everything is clear when backing up your vehicle.
CCD Image Sensor: The Crux CUL-09 rear-view camera features a CCD image sensor that offers 480 lines of resolution. It has 170° (horizontal) x 90° (vertical) viewing angle. The CCD image sensor has a low-light lux rating of 0.4.
Waterproof Housing: The Crux CUL-09 rear-view camera features a IP67 waterproof housing.
Park Assist Lines: The rear-view camera provides parking assist lines on the screen of your vehicle's in-dash aftermarket monitor. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also 3 color-coded horizontal lines that are used to distinguish how close you are getting to the end of the parking spot - Green (Clear), Yellow (Getting Close), Red (Very Close).
Note: You can remove the Park Assist Lines by connecting the camera's two white wires together.
Mounting Options: The Crux rear-view camera features two integrated mounting holes with two screws included. The camera needs to be mounted from underneath the mounting surface with the screw-holes facing up, otherwise image from the camera will not be right side up.
Power & Signal Connections: The rear-view camera features an attached 23.75' composite video cable and 7' power/ground wires. The composite video cable plugs into your in-dash aftermarket multimedia or navigation receiver's composite video camera input. The power (red) & ground (black) wires will need to be hardwired. Power can be obtained from your vehicle's reverse light circuit or from the +12V accessory wire of your aftermarket stereo (if applicable). The ground will need to be connected to your vehicle's metal chassis.
2 questions already asked