About the Crux SWRFD-60E Wiring Interface
Keep your factory display
Keep your factory display
Crux's SWRFD-60E interface lets you keep your Ford's factory 4" screen, AUX audio input, and steering wheel controls when installing a compatible aftermarket radio. Connect this interface to the wires on your new stereo's wiring harness, and you've covered the power, ground, and factory speaker connections for your new stereo. This harness does not retain SYNC, but you will retain voice command features in SYNC-equipped vehicles.
Notes: The SWRFD-60E interface allows you to keep your steering wheel controls with radios from Alpine, Blaupunkt, Boss, Clarion, Dual, Jensen, JVC, Kenwood, Pioneer, and Sony. You'll need to set the time and date display before removing the factory radio; you can't make adjustments once that radio has been removed.
- connect a new stereo in select 2011-18 Ford vehicles
- retain your steering wheel controls with compatible car stereos
- retains factory 4" display screen
- retains AUX audio input
- retains voice command features in vehicles with SYNC (does not retain SYNC)
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # SWRFD-60E
What's in the box:
- Radio replacement interface module
- SWC module
- Wiring harness
- SWC harness
- SWC adapter
- Installation Instructions
Thanks for submitting your review
More details on the Crux SWRFD-60E Wiring Interface
Radio Replacement Interface: The CRUX SWRFD-60E is a radio replacement for select 2011-up Ford vehicles with a factory 4" screen. It facilitates the integration of an aftermarket radio to enable retention of factory features when replacing a factory installed radio in select Ford vehicles. This interface is pre-programmed for retention of Steering Wheel Controls; including Phone Answer/End functions. It also retains the vehicle's factory 4" screen, Aux input, and Voice command features.
Vehicle Compatibility: The CRUX SWRFD-60E is compatible with the following 2011-up Ford vehicles with a factory 4" screen. The CRUX radio replacement interface works on vehicles with or without SYNC. However, the SWRFD-60E does not retain the factory SYNC system.
Make Model Year Ford Edge 2011-2014 Escape 2013-up Explorer 2011-2015 F-150 2013-2014 Fiesta 2014-up Focus 2012-2014 Transit 2015-up Transit Connect 2014-2018
Factory 4" Screen Retention: The CRUX SWRFD-60E radio replacement interface will retain your Ford vehicle's factory 4" LCD screen. You will need to set the Date & Time of the display prior to removal of the factory radio. Once the factory radio is removed, you can no longer make adjustments to Date & Time.
Retains Factory Aux Input: In vehicles without SYNC, the SWRFD-60E can retain the factory Aux input. Your aftermarket head unit must be equipped with a rear-panel Aux input. If your aftermarket receiver doesn't have a stereo RCA rear-panel Aux input, but instead a 3.5mm rear-panel Aux input, you'll need a female stereo to RCA adapter (sold separately).
Retained Voice Commands & Phone Functions: On vehicles equipped with SYNC, the CRUX SWRFD-60E will retain the factory voice command functions that can be activated from the factory steering wheel controls. The SWRFD-60E also retains the Phone Answer/End functions of the steering wheel controls on all compatible vehicles.
Pre-Programmed Steering Wheel Controls: The SWRFD-60E includes a pre-programmed steering wheel control (SWC) module and harness that allows you to retain your vehicle's factory steering wheel controls. The harness consists of a right-angle 3.5mm connector and a blue/yellow wire (only one connection type will be used based on your brand of aftermarket radio). There is also SWC adapter for aftermarket radios with a 3-wire steering wheel control input. The SWRFD-60E will work with any of the listed aftermarket radio brands that feature a steering wheel control input using the appropriate connector and dip-switch settings (see owner's manual for appropriate settings).
- 3.5mm Connector: Alpine, Clarion, Pioneer, Sony, Jensen, Older JVC
- Blue/Yellow Wire: Kenwood, Newer JVC
- 3-Wire Adapter: Other aftermarket radios (like Boss) with SWC Key 1, SWC Key 2, and SWC Ground wires
Navigation Outputs: The CRUX SWRFD-60E radio replacement interface module provides a VSS (vehicle speed sense) and a Reverse Gear output to make installing an aftermarket navigation radio simpler and less time consuming.