About the Crux SWRHK-65T Wiring Interface
Keep your steering wheel audio controls
Crux's SWRHK-65T interface ensures that you can keep the factory steering wheel controls in your 2018-up Hyundai Tucson when you install an aftermarket radio. Connect the package's included wiring harness to the factory harness, and you've covered the power, ground, and factory speaker connections for your new stereo. The interface also supplies outputs (parking brake, speed sense) needed for a navigation radio.
- retain your steering wheel controls with compatible car stereos
- provides connections for parking brake and vehicle speed sense (VSS) for installing navigation receivers
- antenna adapter included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # SWRHK-65T
What's in the box:
- Radio replacement interface module
- Wiring harness
- Steering wheel control harness
- Antenna adapter
- Installation Instructions
Crux SWRHK-65T Wiring Interface reviews
Thanks for submitting your review
More details on the Crux SWRHK-65T Wiring Interface
Vehicle Compatibility: The CRUX SWRHK-65T is a radio replacement interface for the 2018-up Hyundai Tucson. It facilitates the integration of an aftermarket radio to enable retention of certain factory features when replacing a factory-installed radio and is also pre-programmed for retention of steering wheel controls.
Steering Wheel Control Retention: The CRUX SWRHK-65T comes pre-programmed to retain the factory steering wheel controls in your vehicle. The SWC harness consists of a right-angle 3.5mm connector and blue/yellow wire; you'll only use the connection type your aftermarket radio is equipped with. The SWRHK-65T will work with any of the listed aftermarket radio brands that feature a steering wheel control input using the appropriate harness, connector, and dip-switch settings (see owner's manual for appropriate settings).
- 3.5mm Connector: Alpine, Clarion, Dual, Jensen, Pioneer, and Sony
- Blue/Yellow Wire: Kenwood and JVC
Antenna Adapter: The SWRHK-65T provides a motorola to molex antenna adapter to retain your vehicle's factory antenna.
Navigation Outputs: The CRUX SWRHK-65T offers a Parking Brake wire and VSS (Vehicle Speed Sense) wire to simplify the installation of an aftermarket receiver.
Note: The SWRHK-65T is not equipped with a Reverse Trigger output wire.