Sightline Series Rear-View Camera: The Sightline series
RVCTY-71c rear-view camera by Crux has been specifically designed for the
2012-2013 Toyota Tacoma that features a factory in-dash radio with integrated video
monitor. Now you can use your vehicle's factory radio to see what's behind you
when backing up. The RVCTY-71c comes with the necessary harnesses and cables to
connect the rear-view camera to your Toyota vehicle's factory system.
Note: The RVCTY-71c rear-view camera is meant as a back-up aid only; never
solely rely on the rear-view camera when backing-up. In addition to using
the rear-view camera, always look
behind you to make sure everything is clear when backing up your vehicle.
Vehicle Compatibility: The Sightline series RVCTY-71c
rear-view camera is compatible
with the following 2013 Toyota vehicles that feature a factory radio with
integrated video monitor (as of 8/14/14).
|Make ||Model ||Year |
|Toyota ||Tacoma ||2012-2013 |
Automatic Rear-View Switching: The RVCTY-71c features automatic rear-view switching. This means that when you
place your vehicle in reverse gear, your factory radio's monitor will
automatically switch over to the rear-view camera so you can see what's behind
you immediately. There are no hardwire connections to make for this feature, the
reverse wire is integrated in to the included plug-in vehicle harness.
Park Assist Lines: The rear-view camera provides parking
assist lines on the screen of your vehicle's in-dash factory radio. These
parking lines are there to assist you when backing up into a parking space.
There are two vertical lines which help you judge the left and right edges of
the parking space and your vehicle. There are also 3 color-coded horizontal
lines that are used to distinguish how close you are getting to the end of the
parking spot - Yellow (Clear), Purple (Getting Close), Red (Very Close).
Integrated Mounting Collar: You will need to drill a 18.5mm (5/8") hole in your vehicle's
tailgate (next to the handle) using the supplied hole saw drill-bit (drill not included). The rear-view
camera mounts in this opening and features a threaded mounting collar which
holds the camera in place. There is also a self-adhesive double-side weather
strip which mounts between the vehicle and the camera to protect against any
Power/Ground & Signal Connections: The rear-view camera
features an attached 6' power/signal cable and includes a 22" extension harness
which plug into each other. The extension harness then plugs into the pre-ran
factory camera cable with a 4-pin connector in the tailgate of the vehicle.
There is also a 5.5' T-harness which connects between the factory radio harness
and the factory radio; this harness includes a 16-pin, 28-pin, 4-pin, and 15-pin
- Resolution: 420 TV
- Pixels: 656 x 492
- Viewing Angle:
- Minimum Illumination:
- Shutter Speed:
- Voltage: 12V
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.