About the Crux RVCTY-71D Backup Camera System
The backup cam just for you
The backup cam just for you
Designed specifically for select 2012-13 Toyota Tundra vehicles, this Crux RVCTY-71D rear-view camera system allows you to integrate backup video into your factory radio. The package includes the rear-view camera and a harness that connects to your factory system.
Once installed, you'll see a generous, well-lit picture of what's behind you, with a 170-degree wide view and video capture down to 0.2 Lux for night driving. Crux also gives you the option to enable on-screen parking assist lines so you can gauge distance more easily.
Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjuction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.
- system includes waterproof CCD camera, video extension cable, and factory harness
- NTSC wide-angle rear view camera compatible with select Toyota Tundra vehicles
- resolution: 420 TV lines
- pixels: 656 x 492
- 170° wide viewing angle
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # RVCTY-71D
What's in the box:
- Rear-view camera (w/ attached 4' power/signal cable)
- 5' Extension power/signal cable
- 22.5mm Hole saw
- Installation Instructions
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Crux RVCTY-71D Backup Camera System reviews
Thanks for submitting your review
More details on the Crux RVCTY-71D Backup Camera System
Sightline Series Rear-View Camera: The Sightline series RVCTY-71d rear-view camera by Crux has been specifically designed for the 2012-2013 Toyota Tundra that features a factory in-dash radio with integrated video monitor. Now you can use your vehicle's factory radio to see what's behind you when backing up. The RVCTY-71d comes with the necessary harnesses and cables to connect the rear-view camera to your Toyota vehicle's factory system.
Note: The RVCTY-71d rear-view camera is meant as a back-up aid only; never solely rely on the rear-view camera when backing-up. In addition to using the rear-view camera, always look behind you to make sure everything is clear when backing up your vehicle.
Vehicle Compatibility: The Sightline series RVCTY-71d rear-view camera is compatible with the following Toyota vehicles that feature a factory radio with integrated video monitor (as of 2/21/2018).
Automatic Rear-View Switching: The RVCTY-71d features automatic rear-view switching. This means that when you place your vehicle in reverse gear, your factory radio's monitor will automatically switch over to the rear-view camera so you can see what's behind you immediately. There are no hardwire connections to make for this feature, the reverse wire is integrated in to the included plug-in vehicle harness.
Park Assist Lines: The rear-view camera provides parking assist lines on the screen of your vehicle's in-dash factory radio. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also 3 color-coded horizontal lines that are used to distinguish how close you are getting to the end of the parking spot - Yellow (Clear), Purple (Getting Close), Red (Very Close).
Note: You can cut the thin white wire on the camera cable to remove the park assist lines.
Adjustable Angle: You can manually adjust the up and down angle of the rear-view camera to give you the best visibility behind your vehicle.
Mounting Options: You will need to drill a 22.5mm (7/8") hole in your vehicle's tailgate (next to the handle) using the supplied hole saw drill-bit (drill not included). The rear-view camera mounts in this opening and features an integrated spring locking collar which holds the camera in place.
Power/Ground & Signal Connections: The rear-view camera features an attached 4' power/signal cable and includes a 5' extension cable which plug into each other. The extension cable then plugs into the pre-run factory camera cable with a 4-pin connector underneath the vehicle, near the spare tire. The red power lead will need to be run to the reverse light wire in the vehicle or to a switched +12V source. The black ground lead will need to be attached to the vehicle chassis.
- Resolution: 420 TV Lines
- Pixels: 656 x 492
- Viewing Angle: 170-degrees
- Minimum Illumination: 0.2 Lux
- Shutter Speed: 1/60s-20us
- Voltage: 12V
1 question already asked