About the Crux RVCCH-75WTC
Centrally mounted Wrangler-cam
Centrally mounted Wrangler-cam
A Wrangler's rear-end is an unforgiving landscape for mounting a backup cam, but Crux changes that with its RVCCH-75WTC spare-tire mounted camera. Even better news is that Crux gives you everything you need to see backup cam video on your Wrangler's MyGIG factory touchscreen radio. The camera's wide view and visibility for night driving make it an essential add-on for your Wranglin' way of life. Crux includes parking lines that always come in handy whether you're backing around boulders or into a garage bay.
Add another video source
Crux gives you composite video inputs for an additional video source if you want it, but seeing your backup cam video feed is as easy as shifting into reverse.
Installing this camera yourself? Here's what you should know.
What does it do? Unless otherwise noted, a backup camera is only intended for use backing up your vehicle. (If you require a front-view or constant rear-view camera, check for that capability.)
What tools and supplies will I need? A panel tool, a wire cutter/stripper, a soldering iron, and a rosin-core solder with heat shrink tubing are recommended, along with whatever tools are needed to remove the radio from the dash.
How much wiring is required? Wiring instructions vary from camera to camera. Some cameras have power wiring that can only be connected near the radio. Others let you power the camera at compatible reverse lights. In all cases, the camera must be wired for power and ground, the camera's video output must be connected to the radio/monitor, and the radio/monitor must be connected to a reverse trigger in your vehicle. Some radio replacement interfaces supply a reverse trigger wire for the radio -- using that wire to power your camera will damage the interface.
Will the included video cable be long enough? You'll need to route the camera's video cable from its mounting location outside your vehicle into your vehicle's cabin and all the way to the screen in the dash. This often requires drilling a small hole in your vehicle or filing some metal and or plastic. You'll also need to estimate the length of cable needed to run from the camera to the dash, which will not be a straight shot. Each camera's cable length is listed.
- spare-tire mounted rear-view camera for Jeep Wrangler factory radios
- compatible with select 2007-17 Jeep Wrangler MyGIG touchscreen radios
- vehicle-specific harnesses and OBD-II interface module included
- additional video input
- parking lines
- works with automatic or manual transmissions
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # RVCCH-75WTC
What's in the box:
- Spare tire mount w/ integrated camera (8' power/ground wires and 24' video cable)
- Integration module
- 22-Pin T-harness (w/ 38" composite a/v cables)
- 22-Pin T-harness (w/ 10" integration module harness)
- Three 7" wire-ties
- 3 Lock-washers
- Installation guide
Crux RVCCH-75WTC reviews
Thanks for submitting your review
More details on the Crux RVCCH-75WTC
Overview: Crux's RVCCH-75WT rear-view integration system is designed to add backup camera functionality to 2007 - 2017 Jeep Wranglers with factory MYGIG radios. It includes a high-quality rear-view camera integrated into an OEM style spare tire mounting bracket, T-harnesses for interfacing the back of the factory radio, an integration module, and all the cabling needed.
Compatibility: 2007 - 2017 Jeep Wranglers with MYGIG radio.
Wiring Integration: Two 22-pin t-harnesses are provided for interfacing the factory wiring at the back of the factory radio. These also provide connections to the included integration module as well as the composite video output from the rear-view camera. A single white wire from the integration module provides reverse power to the red power wire coming off the camera's composite video connector. Note: The white wire does not supply reverse power in vehicles with a manual transmission. The normally unused red wire at the camera end of the cable gets tied into the reverse wire of the vehicle instead and the white wire is capped off.
Park Assist Lines: The rear-view camera can provide parking assist lines on the factory in-dash screen by simply cutting the white looped wire on the camera cable. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also 3 color-coded horizontal lines that are used to distinguish how close you are getting to the end of the parking spot - Green (Clear), Yellow (Getting Close), and Red (Very Close).
Inputs/Outputs: The integration t-harnesses also include a set of composite audio/video outputs, for running to an additional monitor (not included), and a set of audio/video input jacks for playing external video sources through the factory radio. After installing the rear-view camera system, the factory radio will display VES (Vehicle Entertainment System) along with the other source icons. This is used to select the a/v input provided by the integration harness.
The Crux RVCCH-75WTC replaces these items
- system includes waterproof CCD camera, video extension cable, factory interface and two factory harnesses
- NTSC wide-angle rear view camera compatible with select Jeep Wrangler vehicles
- 170° wide viewing angle