About the Pro-Ject Amp Box DS2
The Pro-Ject Amp Box DS2 doesn't feature any knobs or blinking lights, because it does a straightforward job — it cranks out 100 watts per channel to power a pair of speakers. It's a great match for the Pro-Ject MaiA preamp, which can connect via the stereo RCA preamp inputs on the back of the amp.
There's a stereo RCA output and a12-volt trigger in/out in the amp's vibration-resistant aluminum chassis, so you can daisy-chain and remotely power up several DS2's in a surround sound or multi-zone system.
- 100 watts per channel into 8 ohms (1,000 Hz) at 0.1% THD with 2 channels driven
- 140 watts per channel into 4 ohms
- stereo analog RCA input and output
- 12-volt trigger input and output for custom integration
- vibration-resistant aluminum chassis
- one set of binding post speaker terminals
- frequency response: 10-50,000 Hz
- THD: less than .1% at 90 watts
- 8-3/16"W x 2-3/4"H x 9-13/16"D
- weight: 3.68 lbs.
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # AmpBox DS2-BK
What's in the box:
- Stereo amplifier
- AC power adapter (attached 59" DC cable)
- 59" AC power cord
- Instructions For Use
Pro-Ject Amp Box DS2 reviews
Thanks for submitting your review
More details on the Pro-Ject Amp Box DS2
Features & specs
|Number of Channels||2|
|Power Output per Channel (8 ohms)||100|
|Power Output per Channel (6 ohms)||---|
|Power Output per Channel (4 ohms)||140|
|Bridged Power per Channel||0 watts|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Inputs & Outputs|
|Number of Inputs||1|
Class D Amplification: At the heart of the Pro-Ject Amp Box DS2 is Class D module which is highly efficient and energy saving. It delivers high output power with very low THD to drive demanding loudspeakers and fill any room with pure, dynamic sound. The stereo power amplifier is rated at 100 watts x 2 channel into 8Ω and 140 watts x 2 channel into 4Ω.
4 Layered PCB: The Pro-Ject Amp Box DS2 four layered PCB enables shorter signal paths, further improving sound quality.
Aluminum/Metal Casing: The Pro-Ject Amp Box DS2's casing is made of aluminum and metal to protect against vibration.
Stereo RCA Inputs & Outputs: The Pro-Ject Amp Box DS2 is equipped with a set of stereo RCA inputs for connecting your preamplifier or processor. The stereo RCA outputs bypass the input stage of the power amplifier. The gold-plated stereo RCA jacks offer corrosion-free signal transfer.
Binding Post Speaker Outputs: The Amp Box DS2 is equipped with a set of binding post speaker terminals that will accept bare wire (up to 10AWG), pin-connectors, spade-lugs, and banana plugs (single only). The gold-plated binding post terminals offer corrosion-free signal transfer. You can connect one pair of 8Ω or 4Ω speakers.
Power Requirements: The Pro-Ject Amp Box DS2 operates off of standard household current using the included external power supply and detachable AC power cord. The outboard power supply and cord help reduce noise and interference.
- Input: 100-240V~50/60Hz, 300VA
- Output: 48VDC, 2.5A
Trigger Input/Output: The Amp Box DS2 is equipped with a 12V, 2.5mm trigger output and 12V, 2.5mm trigger input to turn on/off the stereo power amplifier and connected preamplifier remotely from one another.