About the Aquatic AV AQ-AD300.2MICRO
Amp up your Harley
Amp up your Harley
The words “aquatic” and “motorcycle” aren't often seen in the same sentence, but don't let the name fool you – this Aquatic AV AQ-AD300.2-MICRO amplifier is perfect for your Harley-Davidson® touring motorcycle. This weather-resistant 2-channel amp will give you powerful performance in conditions that would send a lesser amp to a watery grave.
Like it loud?
This high-performance amplifier packs more than enough power to punch through engine and wind noise when you're cruising through the countryside. The adjustable high-pass/low-pass crossover lets you filter the output for use with a subwoofer or a set of full-range speakers. You can bridge to mono operation to drive a sub, and tune up that bottom end with the built-in bass boost, too. This amp will happily work in either 4-ohm or 2-ohm configurations, but Aquatic AV recommends the 2-ohm setting in stereo mode for maximum performance – a good thing to have when you're heading down the highway.
Designed to keep out moisture and dust
Aquatic AV builds this IP65-rated amp for life on the road, with conformal-coated circuit boards, custom-molded grommets, and weatherproof gaskets. The chassis is made with aluminum and stainless steel, so it's light, tough, and corrosion-resistant. The compact, efficient Class D design means it tucks away neatly, runs cool, and won't put a strain on your battery.
Note: We do not recommend this amp for 2014-up Harley-Davidson® models equipped with Boom™ Box infotainment systems.
Note: Using high-level signal inputs requires the removal of the control panel cover and will significantly reduce the amplifiers ingress performance for both water and dust. This will also void the warranty.
- 2-channel marine-rated amplifier for select Harley-Davidson motorcycles
- 100 watts RMS x 2 at 4 ohms
- 150 watts RMS x 2 at 2 ohms
- 300 watts bridged at 4 ohms
- includes amp wiring harness and RCA cable
- high and low-pass filters
- auto turn-on with speaker-level inputs
- aluminium/stainless steel chassis
- conformal coated circuit boards
- custom molded grommets around cable extrusions
- gaskets between all meeting points
- IP65 rating: amp is fully protected against water and dust
- frequency response: 10-45,000 Hz
- bass boost (0-12 dB at 85 Hz)
- dimensions: 6-1/2"W x 4-7/16"D x 1-13/16"H
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # AQ-AD300.2MICRO
What's in the box:
- 2-Channel waterproof amplifier with attached 14" signal cable (RCA jacks) and 12" power/speaker cables
- Two 30A ATO fuses (1 installed in fuse holder)
- 7" Wiring harness
- 6" Speaker input harness
- 2 RCA male-to-male adapters
- User/Installation Manual
Aquatic AV AQ-AD300.2MICRO reviews
Thanks for submitting your review
More details on the Aquatic AV AQ-AD300.2MICRO
Harley Davidson Motorcycle Amplifier: The AQ-AD300.2-MICRO combines exceptional sound quality, high performance characteristics and unprecedented reliability into a 2-channel amplifier. With 300W of pure power (150W per channel at 2 Ohms) the AQ-AD300.2-MICRO packs enough punch for even the loudest of environments (like your Harley Davidson motorcycle), so your music is always clear and present.
Note: 2014 and up Harley-Davidson Motorcycle Touring models with Harley Boom Box Infotainment systems will require a system flash from the dealership before the installation of any aftermarket amplifier.
Waterproof Design: The AQ-AD300.2-MICRO's Ingress Protection rating of IP65 means the amplifier is fully protected against water and dust. Conformal coated circuit boards protect the smallest components from any humidity or atmospheric moisture, while custom molded grommets around cable extrusions and gaskets between all meeting points eliminate any chance of water or dust intrusion. Aluminum and Stainless Steel are used in chassis construction eliminating any risk of rust or corrosion.
Class D Technology: Class D (Digital) amplifiers are much more efficient than traditional amplifiers; producing less heat, lowering power consumption, reducing strain on batteries and charging systems.
4 & 2 Ohm Stable: Designed to support the widest variety of applications the AQ-AD300.2-MICRO amplifier operates at both 4ohm and 2ohm speaker configurations. Running 2ohm configurations allows more speakers to be powered and is ideal for high background noise environments such as motorcycle use.
- The amplifier is rated at 100 watts x 2 channel into 4 ohms.
- The amplifier is rated at 150 watts x 2 channel into 2 ohms.
Bridge Mode: Bridge Mode allows each channel's power to be combined for maximum output, ideal for use with a single subwoofer. The amplifier is rated a 300 watts x 1 channel into 2 ohms.
High/Low Pass Crossovers: A built-in High-Pass/Low-Pass crossover is adjustable from 40Hz to 400Hz and allows the output to be filtered for optimum use with a subwoofer or mid/high-range speakers. The crossover can also be set to FULL for a full-range audio signal.
Bass Boost: The Bass Boost feature provides up to 12dB of boost to bass frequencies (@ 85Hz), allowing even more control over your preferred sound.
Low & High Level Inputs: The AQ-AD300.2-MICRO provides either low-level (RCA) or high-level (speaker) input connections. The high-level inputs provide auto turn-on.
Note: Using the high-level signal inputs requires the removal of the control panel cover and will significantly reduce the amplifiers ingress performance for both water and dust (no longer waterproof).
Speaker Outputs: The AQ-AD300.2-MICRO includes a wiring harness which plugs into the attached harness on the amplifier. On the other end of the harness are four 16AWG speaker leads terminated with bullet-connectors to connect your speakers.
Power/Remote/Ground: The amplifier features an attached 12AWG Power (red) 16AWG Remote (blue), and 12AWG Ground (black) wire. The Power and Ground are terminated with bare wire, while the Remote wire is terminated with a bullet-connector. The Power wire also has an in-line fuse holder with a 30A fuse installed.
Overload Protection: The AQ-AD300.2-MICRO utilizes overload protection to protect the amplifier, your speakers, and your motorcycle.