About the Aquatic AV AQ-UNH-2
The AQ-UNH-2 wiring harness is used to connect power, ground, and speaker leads to Aquatic AV's powered subs and stereo systems. The harness is included with most Aquatic AV spa stereos, but you'll need to buy one for their powered subs as the harness is not included. The cable is designed to resist the effects of moisture and heat found in spas, hot tubs, and pools.
- 12-pin waterproof wiring connector with bare wire ends
- required for Aquatic AV powered subs (included with Aquatic AV spa stereos)
- length: 7-7/8"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # AQ-UNH-2
What's in the box:
- 7" Wiring harness (terminated by a 12-pin molex connector on one end and 12 bare wires on other end)
Aquatic AV AQ-UNH-2 reviews
Thanks for submitting your review
More details on the Aquatic AV AQ-UNH-2
12-Pin Wiring Harness: The Aquatic AV AQ-UNH-2 wiring harness is 7" in length and is terminated by a 12-pin molex connector on one end and 12 bare wires on the other end.
|Pin #||Wire Color||Function|
|3||Yellow||+12V Constant (Battery)|
|4||Red||+12V Switched Accessory|
|5||Purple/black||Right Rear Speaker (-)|
|6||Gray/black||Right Front Speaker (-)|
|7||White/black||Left Front Speaker (-)|
|8||Green/black||Left Rear Speaker (-)|
|9||Purple||Right Rear Speaker (+)|
|10||Gray||Right Front Speaker (+)|
|11||White||Left Front Speaker (+)|
|12||Green||Left Rear Speaker (+)|
Note: This harness is required for Aquatic AV powered sub and is included with Aquatic AV spa stereos.
2 questions already asked