About the Aeris aair Medical Pro
Filters particles down to 0.1 microns
Filters particles down to 0.1 microns
Two filter layers in the Aeris aair Medical Pro give the air around you a deep cleaning, removing amazingly tiny invisible particles. To give you some perspective, a human hair is about 70 microns in diameter, and a red blood cell is about 1 micron. The aair Medical Pro removes particles a tenth the size of a blood cell — that's small enough to filter 99.995% of viruses, bacteria, and other airborne pollutants from your interior air. And the Medical Pro's zinc-perithione filter-coating breaks down and kills bacteria.
Dust is the enemy
The aair 3-in-1 Pro isn't just for filtering the tiny particles you can't see. Dust can also be an irritant, and over time it can cause issues with electronic gear. Using an Aeris air purifier, you'll see less dust when you're wiping down your room's surfaces.
The aair Medical Pro's design is stylish and unobtrusive, and its operation is quiet. Intuitive top-mounted controls turn the unit on and off, switch between night, day and smart modes, adjust fan speed, and more.
Filters the room almost 100 times per day
This powerful filter is rated for rooms up to 540 square feet, and it can completely recycle the air in a room of that size four times every hour. Long-lasting, easy-to-change filter replacements are available separately.
- purifies air in rooms up to 540 square feet
- two-layer filtering:
- pre-filter, F9 class: removes larger particles like dust, pollen and animal dander
- main filter, HEPA H14 class: removes pollutants down to 0.1 microns
- zinc-perithione filter-coating breaks down bacteria trapped in filter
- filter life: up to 12 months
- smoke CADR (clean air delivery rate): up to 295 cubic feet per minute
- CCM (cumulate clean mass): P4/F4
- quiet operation: 35-65 dB
- smart mode automatically adjusts fan speed according to your room's air quality
- sleep mode dims lights and keeps fan whisper-quiet
- built-in Wi-Fi (802.11 b/g/n)
- free Aeris mobile app for Apple® and Android™ lets you monitor air quality and change purifier settings
Dimensions and warranty:
- 14-9/16"W x 23-5/8"H x 15-1/4"D
- weight: 39.7 lbs.
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # AA-WH-ME-110-US-EU-AB-00
What's in the box:
- Aair Medical Pro air purifier (White) with attached 63" power cord (terminated into an IEC C14 male plug)
- 9" AC power cord (IEC C13 jack / 3-prong plug)
- 4 Washable pre-filters
- Instruction Manual
- Quick Set Up Guide
- AQI (Air Quality Index) chart
Thanks for submitting your review
More details on the Aeris aair Medical Pro
Overview: The Aeris aair Medical Pro is a Swiss-made air purifier, designed for medical offices, hospitals, and for those who are in need of medical-grade air purification. It is recommended for rooms up to 540 square feet. The aair Medical Pro effectively removes up to 99.995% of dust, mold, smoke, pollen, pet dander, cooking pollutants, and bacteria and viruses, including 94% of the coronavirus. In addition, silver ions impregnated into the exterior housing, and an anti-microbial coating help prevent cross-contamination through contact. The unit has a Fine Particle CADR (Clean Air Delivery Rate) of up to 295 cubic feet per minute. The air purifier is Wi-Fi compatible, which allows you to monitor and control the unit from your smartphone or tablet from anywhere. The aair Medical Pro weighs approximately 30.8 pounds, and has wheels on the bottom to make it easier for you to move it from room to room.
AQI Sensor: The air purifier has an AQI (Air Quality Index) sensor mounted on one side. You can view the index on the top cover's display, and in the Aeris mobile app.
Filtration: The aair Medical Pro filter utilizes multiple layers to remove airborne particles from the room. The filtration starts with four pre-filters that are inserted inside the air inlets at the bottom. These screens capture large particles and "dust bunnies" that accumulate at floor level. They can be washed under running water, and reinstalled when dry. The F9-class pre-filter layer on the internal filter picks up larger items such as hair, pollen, pet dander and dust. The H14-class True HEPA filter removes 99.995% of the smallest particles and pollutants, down to 0.1 microns. The Medical filter has an estimated lifetime of 12 months, and is user replaceable with the Medical Pro filter refill, available from Crutchfield. Filter dimensions: 11-15/16" (wide) x 11-15/16" (depth) x 11-1/4" (high); weight 6.6 pounds.
Filter Replacement: Changing the filter in the aair Medical Pro is easy. After removing the top cover, the filter lifts straight up and out. Two fabric tabs (Swiss flags) are provided on the top of the filter to assist you. After the new filter is lowered into place, the magnetic top cover is replaced. One edge of the cover has six electrical contacts that must be aligned with the pins on the unit's body when replacing the cover. The filter life timer on the control panel should be reset to zero after the filter has been replaced.
Interchangeable Filters: The filter in the aair Medical Pro is the exact same size as the filter in the aair 3-in-1 Pro. If you decide you want a filter that has better filtration for gases, fumes, and odors, you can replace the Medical Pro's filter with the 3-in-1 Pro filter refill.
No Ozone Creation: Many air purifiers, in the work of removing allergens, dust, mold, and other pollutants, also produce ozone. Aeris air purifiers are made to clean the air in your home or office without releasing any ozone. The patented antimicrobial coating effectively removes any ozone-creating particles before they can be released into the air.
Artificial Intelligence (AI): The air purifier uses AI to constantly learn to run more efficiently and effectively. The built-in IAQ sensors helps the aair Medical Pro run better and use less energy the longer you own it.
Wi-Fi Compatible: The aair Medical Pro features built-in Wi-Fi (802.11 b/g/n/ac 2.4 GHz) to let you wirelessly connect and control the air purifier with your smartphone or tablet. The Aeris app, available for iOS and Android, lets you monitor and control your indoor air quality from anywhere. Not only can you view the current air quality, but you can track it over time (hourly, daily, monthly). You can turn the power on/off, set the fan speed, and activate the Sleep and Smart modes. The app is compatible with devices with iOS 11.0 or later and Android 4.4 and up.
Fan Speeds: The air purifier has six available speeds:
|Speed||Airflow (CFM)||Noise (dB)|
Display: The Aeris aair Medical Pro has a 1-7/8" x 1-3/8" top-mounted display, with icons that indicate the status of the filters, child lock feature status, and the Wi-Fi modes.
Control Panel: On the top of the air purifier, surrounding the display, is a control panel for adjusting the fan speed, activating Smart Mode, and toggling the power on and off.
Smart Mode: The aair Medical Pro uses its AI to automatically select the most appropriate fan speed based on the current indoor air quality and your daily schedule.
Sleep Mode: When you manually lower the fan speed to its lowest level, the air purifier enters Sleep Mode. During Sleep Mode, the display is dimmed, and the fan operates at a whisper quiet level, to help you sleep.
Child Lock: The child lock feature disables all controls to prevent accidental commands.
- Room Size: Up to 540 square feet
- Fine Particle CADR: Up to 295 cubic feet per minute
- CCM (Cumulate Clean Mass): P4/F4
- Power (110V): 80 watts (average); > 180 watts (max)
- Wi-Fi Connectivity: IEEE 802.11 b/g/n/ac 2.4GHz
- Filter Classes: Pre-Filter -- F9; Main HEPA filter -- H14
- Noise Range: 35 to 65 dB (a)
- Dimensions: Width 14-1/2", Height 23-3/4", Depth 15.1875"
- Weight: 30.8 pounds