About the Aeris aair 3-in-1 Pro
Filters particles down to 0.1 microns
Filters particles down to 0.1 microns
Three separate filter layers in the Aeris aair 3-in-1 Pro give the air around you a deep cleaning, removing gases, odors, and tiny invisible particles. For some perspective, a human hair is about 70 microns in diameter, and a red blood cell is about 1 micron. The aair 3-in-1 Pro removes particles a tenth the size of a blood cell — that's small enough to filter 94% of coronavirus from interior air, and 99.95% of other viruses, bacteria, and other airborne pollutants. The activated charcoal layer filters smoke and other gases, like paint fumes.
This Aeris purifier is a good match for larger rooms, like an open living room or even a conference room at work. Its built-in Wi-Fi lets you monitor the air quality and change settings using an app on your phone.
Dust is the enemy
The aair 3-in-1 Pro isn't just for filtering the tiny particles you can't see. Dust can also be an irritant, and over time it can cause issues with electronic gear. Using an Aeris air purifier, you'll see less dust when you're wiping down your room's surfaces.
The 3-in-1 Pro's design is stylish and unobtrusive, and its operation is quiet. Intuitive top-mounted controls turn the unit on and off, switch between night, day and smart modes, adjust fan speed, and more.
Filters the room almost 100 times per day
This powerful filter is rated for rooms up to 750 square feet, and it can completely recycle the air in a room of that size four times every hour.
- purifies air in rooms up to 750 square feet
- three layer filtering:
- pre-filter, F7 class: removes larger particles like dust, pollen and animal dander
- activated charcoal layer removes gases and odors
- main filter, HEPA H13 class: removes pollutants down to 0.1 microns
- smoke CADR (clean air delivery rate): up to 390 cubic feet per minute
- filter life: up to 12 months
- CCM (cumulate clean mass): P4/F4
- quiet operation: 35-65 dB
- smart mode automatically adjusts fan speed according to your room's air quality
- sleep mode dims lights and keeps fan whisper-quiet
- built-in Wi-Fi (802.11 b/g/n)
- free Aeris mobile app for Apple® and Android™ lets you monitor air quality and change purifier settings
Dimensions and warranty:
- 14-9/16"W x 23-5/8"H x 15-1/4"D
- weight: 39-3/4 lbs.
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # AA-PE-31-110-US-EU-00-00
What's in the box:
- Aair 3-in-1 Pro air purifier (Peach) with attached 63" power cord (terminated into an IEC C14 male plug)
- 9" AC power cord (IEC C13 jack / 3-prong plug)
- 4 Washable pre-filters
- Instruction Manual
- Quick Set Up Guide
- AQI (Air Quality Index) chart
Thanks for submitting your review
More details on the Aeris aair 3-in-1 Pro
Overview: The Aeris aair 3-in-1 Pro is a Swiss-made air purifier, designed for living rooms, businesses, conference rooms, or any large space up to 750 square feet. It can remove up to 99.95% of dust, mold, smoke, pollen, pet dander, cooking pollutants, and bacteria and viruses, including 94% of the coronavirus. The unit has a Fine Particle CADR (Clean Air Delivery Rate) of up to 390 cubic feet per minute, and a Gas Phase CADR of up to 115 cubic feet per minute. The air purifier is Wi-Fi compatible, which allows you to monitor and control the unit from your smartphone or tablet from anywhere. The aair 3-in-1 Pro weighs approximately 35.2 pounds, and has wheels on the bottom to make it easier for you to move it from room to room.
AQI Sensor: The air purifier has an AQI (Air Quality Index) sensor mounted on one side. You can view the index on the top cover's display, and in the Aeris mobile app.
Filtration: The aair 3-in-1 Pro filter utilizes multiple layers to remove airborne particles from the room. The filtration starts with four pre-filters that are inserted inside the air inlets at the bottom. These screens capture large particles and "dust bunnies" that accumulate at floor level. They can be washed under running water, and reinstalled when dry. The F7-class pre-filter layer on the internal filter picks up larger items such as hair, pollen, pet dander and dust. This reduces the load on the other two layers. The center layer, with activated carbon and activated alumina, removes gases, fumes, and odors. Finally, the H13-class True HEPA filter removes 99.95% of the smallest particles and pollutants, down to 0.1 microns. The 3-in-1 filter has an estimated lifetime of 12 months, and is user replaceable with the 3-in-1 Pro filter refill, available from Crutchfield. Filter dimensions: 11-15/16" (wide) x 11-15/16" (depth) x 11-1/4" (high); weight 12.36 pounds.
Filter Replacement: Changing the filter in the aair 3-in-1 Pro is easy. After removing the top cover, the filter lifts straight up and out. Two fabric tabs (Swiss flags) are provided on the top of the filter to assist you. After the new filter is lowered into place, the magnetic top cover is replaced. One edge of the cover has six electrical contacts that must be aligned with the pins on the unit's body when replacing the cover. The filter life timer on the control panel should be reset to zero after the filter has been replaced.
Interchangeable Filters: The filter in the aair 3-in-1 Pro is the exact same size as the filter in the aair Medical Pro. If you decide you want a filter that has medical grade air filtration, you can replace the 3-in-1 Pro's filter with the Medical Pro filter refill.
No Ozone Creation: Many air purifiers, in the work of removing allergens, dust, mold, and other pollutants, also produce ozone. Aeris air purifiers are made to clean the air in your home or office without releasing any ozone. The patented antimicrobial coating effectively removes any ozone-creating particles before they can be released into the air.
Artificial Intelligence (AI): The air purifier uses AI to constantly learn to run more efficiently and effectively. The built-in IAQ sensors helps the aair 3-in-1 Pro run better and use less energy the longer you own it.
Wi-Fi Compatible: The aair 3-in-1 Pro features built-in Wi-Fi (802.11 b/g/n/ac 2.4 GHz) to let you wirelessly connect and control the air purifier with your smartphone or tablet. The Aeris app, available for iOS and Android, lets you monitor and control your indoor air quality from anywhere. Not only can you view the current air quality, but you can track it over time (hourly, daily, monthly). You can turn the power on/off, set the fan speed, and activate the Sleep and Smart modes. The app is compatible with devices with iOS 11.0 or later and Android 4.4 and up.
Fan Speeds: The air purifier has six available speeds:
|Speed||Airflow (CFM)||Noise (dB)|
Display: The Aeris aair 3-in-1 Pro has a 1-7/8" x 1-3/8" top-mounted display, with icons that indicate the status of the filters, child lock feature status, and the Wi-Fi modes.
Control Panel: On the top of the air purifier, surrounding the display, is a control panel for adjusting the fan speed, activating Smart Mode, and toggling the power on and off.
Smart Mode: The aair 3-in-1 Pro uses its AI to automatically select the most appropriate fan speed based on the current indoor air quality and your daily schedule.
Sleep Mode: When you manually lower the fan speed to its lowest level, the air purifier enters Sleep Mode. During Sleep Mode, the display is dimmed, and the fan operates at a whisper quiet level, to help you sleep.
Child Lock: The child lock feature disables all controls to prevent accidental commands.
- Room Size: Up to 750 square feet
- Fine Particle CADR: Up to 390 cubic feet per minute
- Gas Phase CADR: Up to 115 cubic feet per minute
- CCM (Cumulate Clean Mass): P4/F4
- Power (110V): 80 watts (average); > 180 watts (max)
- Wi-Fi Connectivity: IEEE 802.11 b/g/n/ac 2.4GHz
- Filter Classes: Pre-Filter -- F7; Main HEPA filter -- H13
- Noise Range: 35 to 65 dB (a)
- Dimensions: Width 14-1/2", Height 23-3/4", Depth 15-3/16"
- Weight: 35.2 pounds