About the Hertz Marine HEX 6.5 C-W
Shallow design, deep sound
Shallow design, deep sound
Big performance doesn't always require a big, chunky speaker. Hertz' shallow-mount HEX 6.5 C-W 6-1/2” marine speakers will bring high-quality audio to any boat. These stylish speakers will handle up to 50 watts RMS, so they'll cut through wind and engine noise to make your music sound great.
Built to perform
These high-performance marine speakers are designed for infinite-baffle applications, so you can install them in just about any suitable location. Wherever they are, they'll deliver outstanding high-end fidelity when you're out on the water, with high-density magnets, UV-resistant polypropylene cones, and PEI dome tweeters that are optimized for off-axis dispersion.
Made for life on the water
The speaker basket and grille are made from a rugged, UV-resistant polymer that stands up to water, dust, and mud, while the ‘Classic” mesh grille protects the tweeter from both dirt and damage. Nickel-plated terminals, silicone-insulated leads, sealed crossovers, and Santoprene rubber surrounds help keep these durable speakers performing at a high level.
These speakers come with the Hertz Pure Marine Certified Product stamp, which means they're IP65-rated and meet ASTM-D4329 standards for UV resistance and ASTM-B117 for salt and fog. You'll enjoy their outstanding sound for season to come.
When you think of Italian cars, you think of style, performance, and awesome sound. Same goes for Italian audio gear. Hertz speakers, subs, and amps have made cars sound super since 1998. Known for great sound and technological innovation, high-end gear from Hertz will bring powerful performance audio to any vehicle or vessel.
- designed for marine applications
- 6-1/2" polypropylene woofer
- Santoprene rubber surround
- 1" PEI dome tweeter with neodymium magnet
- stainless steel tweeter grille
- sound-transparent mesh grille
- nickel-plated, corrosion-resistant terminals
- built-in crossovers
- designed for infinite baffle applications
- handles up to 50 watts RMS (100 peak)
- frequency response 50-23,000 Hz
- sensitivity: 88 dB
- impedance: 4 ohms
- mounting depth: 2.44"
- frame diameter: 7.08"
- cutout diameter: 5.01"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # HEX 6.5 C-W
What's in the box:
- Two 2-way marine speakers
- 2 Gaskets
- 2 Grilles
- Two 10' Lengths of speaker wire (female quick slides on one end and bare wire on the other)
- Eight 1" Stainless steel screws
- 8 Stainless steel speed clips
- Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 28 Others)
- Template on box
Thanks for submitting your review
More details on the Hertz Marine HEX 6.5 C-W
Features & specs
|Speaker Size||6 3/4|
|Tweeter Design||0.9" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
88 dB at 1 watt |
|Frequency Response||50 - 23k Hz|
|Max RMS Power Handling||50|
|Peak Power Handling (Watts)||100|
|Top-mount Depth (Inches)||2 1/2|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 1/16|
Size: With a required cutout diameter of approximately 5", these speakers fit into the openings for standard 6½" car speakers, but the frame is much bigger than a typical 6½" and the screw hole pattern is different. The mounting height is also greater than most car speakers. For these reasons, the speakers won't fit in most car applications.
Infinite-Baffle Operation: The speakers are optimized for infinite baffle operation, so they can be installed in a variety of locations without the need for a dedicated enclosure.
Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Hertz optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.