About the Hertz K 170
Start with Hertz
Start with Hertz
I can be a heel-dragger if we're talking DIY projects, but when it comes to upgrading to new speakers, I always regret waiting. Going from the fuzzy crackly-ness of old factory speakers to clear and present sound is always rewarding. Hertz's Uno Series car speakers give you a way to do so with solid power handling and trickle-down design elements from competition-level audio engineering.
Handling up to 70 watts RMS, this Hertz's Uno Series K 170 6-3/4" component speaker system employs a treated paper cone and foam surround for low-frequency excellence and a separate PEI dome tweeter with an integrated crossover for crisp highs. Hertz includes tweeter installation solutions for a variety of mounting styles.
The Hertz philosophy
Hertz believes that a good speaker should reveal the emotional power of the music you love. That's a high bar, but with their commitment to using premium components and boundary-pushing design, they're more than up to challenge. Comprised of music lovers, Hertz is committed to optimizing your car's system for total audio enjoyment.
Grilles are not included; the factory grilles should be suitable for most applications.
- component speaker system includes 2 woofers and 2 tweeters
- 6-3/4" treated paper woofer with foam surround
- PEI dome tweeter with integrated crossover
- handles up to 70 watts RMS (280 watts peak power)
- frequency range: 55-23,000 Hz
- sensitivity: 93.5 dB
- woofer mounting depth: 1-13/16"
- impedance: 4 ohms
- grilles not included
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # K 170
What's in the box:
- Two V 170 Woofers
- Two T 24 Tweeters (46" length of speaker wire attached with in-line crossover)
- 2 Tweeter flush mount trim rings
- 2 Tweeter flush mount clamps
- 2 Angled surface mount housings
- 2 Tweeter grilles (installed)
- Eight 3/4" Screws
- 8 Speed clips
- 2 Round adhesive foam pads
- Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 21 Others)
- Template on box
Hertz K 170 reviews
Thanks for submitting your review
This review was collected as part of a promotion
More details on the Hertz K 170
Features & specs
|Tweeter Design||24mm Dome|
|Woofer Composition||Pressed Paper (Water-Repellent|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||93.5|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||55 - 23k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||70|
|Peak Power Handling (Watts)||280|
|Top-mount Depth (Inches)||1 13/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 1/2|
|Mounting Height (Inches)||0.21|
Tweeter Mounting: Brackets are included for flush mounting and angled surface mounting (60° or 30°) the tweeters. If surface mounting, holes for the mounting screws and wire will need to be drilled.
Tweeter Mounting Dimensions:
|Flush Mount||60° Angled Surface Mount||30° Angled Surface Mount|
Crossovers: The high pass crossovers are wired in-line and attached to the tweeters. Each crossover's diameter is approximately 3/8" and the slope is 6 dB/octave. The woofers are not crossed over.
8 questions already asked
An extremely cost-effective upgrade to my (23-year-old!) factory speakers. Tweeters are very clear and cut through the noise of the road. The included pods were an incredible help to adapt the tweeters for mounting in my car.
Scott from Philadelphia, PA