About the Hertz MP 25.3
Smooth Hertz highs
Smooth Hertz highs
Hertz's Mille PRO Series tweeters serve up delicious detail, thanks to a 1-3/16" Tetolon fiber dome driven by a neodymium magnet. A special Center Tuning Duct helps extend the lower end of the frequency range for a smoother sound and less distortion.
The Hertz philosophy
Hertz believes that a good speaker should reveal the emotional power of the music you love. That's a high bar, but with their commitment to using premium components and boundary-pushing design, they're more than up to challenge. Comprised of music lovers, Hertz is committed to optimizing your car's sound system for total audio enjoyment.
- 1-3/16" Tetolon dome tweeters (pair)
- hardware for flush- and surface-mounting
- handles up to watts 60 RMS (120 watts peak power)
- frequency response: 1,400-22,500 Hz
- sensitivity: 91 dB
- top-mount depth: 11/16"
- impedance: 4 ohms
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # MP 25.3
What's in the box:
- Two MP 25.3 Dome tweeters (with attached 10" length of speaker wire)
- 2 Flush mount trim rings
- 2 Flush mount clamps
- 2 Angled surface mount housings
- 2 OEM Mounting brackets
- 2 Grilles (installed)
- Four 3/4" Screws
- Four 1/2" Flat head screws
- 4 Large speed clips
- 4 Small speed clips
- Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 21 Others)
- Template on box
More details on the Hertz MP 25.3
Features & specs
|Tweeter Design||29mm Dome|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||91|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||1400 - 22.5k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||0 11/16|
|Bottom-mount Depth (Inches)||0 3/4|
|Cutout Diameter or Length (inches)||1 5/8|
Mounting: Brackets are included for flush mounting, angled surface mounting (60° or 30°), and mounting behind the factory grille.
Tweeter Mounting Dimensions:
|Flush Mount||60° Angled Surface Mount||30° Angled Surface Mount||Top Mount (behind factory grille)||Bottom Mount (behind factory grille)|
|Cutout Diameter||1.605"||N/A||N/A||1.306" (minimum)||1.798" (minimum)|
Power: The power handling specification (120 watts peak) is only valid when using a high-pass crossover, 2.5 kHz and 12 dB/octave minimum.
Crossover: A crossover is necessary for the MP 25.3, but is not included.
Q Crutchfield asked: Why did you buy this?