About the Samsung WMN-M10E No Gap Wall Mount
Samsung's "no-gap" mounting solution
Samsung's "no-gap" mounting solution
The Samsung WMN-M10E No Gap Wall Mount is designed specifically to mount a Samsung QLED 49", 55", or 65" TV (including the Q7F, Q7C, Q8C, and Q9F series). The minimal gap between wall and TV — 0 to 1/4" depending on the TV model — is possible because the part that attaches to the TV fits a carved out area on the back of the set. This video shows how it works (start at the 1:30 mark).
Another surprise from this no-gap design is that it allows you to tilt your Samsung QLED TV downward 6° to 10°, depending on the size of the TV. This allows you to mount your TV high on the wall (like over a fireplace) and tilt it downward for a better viewing angle.
- designed specifically to wall-mount a 49", 55", or 65" Samsung QLED TV (includes Q7F, Q7C, Q8C, and Q9F series)
- mounts your TV to the wall with a gap of 0 to 1/4"
- tilt mechanism allows you to tilt the TV downward 6° to 10° for a better viewing angle
- stud-mounting required (included wall bracket plate works with 16" OC studs only)
- mounting hardware included
- includes a longer 9-3/4-ft. detachable AC power cord for greater installation flexibility
- 59" rubber cable management channel conceals the TV's power cord and "optical" cable
- Note: This wall-mount bracket does not support standard VESA mounting patterns and is only compatible with the Samsung QLED TVs listed above
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # WMN-M10EB/ZA
What's in the box:
- Wall bracket
- TV bracket
- 2 Support brackets
- 9.75' AC power cord
- 8 Spacer adapters
- 59" Rubber cable channel
- Four M4 x 14mm screws
- Four M4 x 8mm screws
- Six 2.125" (length) screws
- Four 1.375" (length) screws
- 6 Large anchors
- 4 Small anchors
- 4 Rectangular self-adhesive foam pads
- 4 Round self-adhesive foam pads
- 4 Self-adhesive strips
- 4 Self-adhesive mounting pads
- 7 White stickers
- Intallation Guide
- Additional Installation Instructions
- Wall-Mount Template
- "Cautions When Installing" booklet
- TV bracket diagram
- Warranty Information
Samsung WMN-M10E No Gap Wall Mount reviews
Thanks for submitting your review
More details on the Samsung WMN-M10E No Gap Wall Mount
Compatibility: The Samsung WMN-M10E No Gap Wall-Mount is designed specifically to wall mount a Samsung QLED 49", 55", or 65" TV (including the Q9F, Q8C, Q7C, and Q7F series).
Note: This wall-mount bracket does not support standard VESA mounting patterns and is only compatible with the Samsung QLED TVs listed above.
No Gap Design: The Samsung WMN-M10E mounts your Samsung Q8C, Q7C, and Q7F series TV to the wall with a gap of 0 to 0.125" The Samsung Q9F series TV will have a 0.25" gap or more from the wall. The distance between the wall and the left or right side of the TV may different depending on the wall and installation conditions. A larger gap between the back of the QLED TV and the wall may occur if the wall is not 100% flat or is constructed off angle to the floor (or if the wall-mount installation is done incorrectly).
Note: Eight wall spacer adapters are included if there is protruding part of the wall that requires that you mount the TV further from the wall.
Tilt Mechanism: The Samsung WMN-M10E No Gap Wall-Mount allows you to tilt your Samsung QLED series TV downward 6° to 10°; based on the size of the television. This allows you to mount your TV high on the wall (like over a fireplace) and tilt it downward for a better viewing angle.
Wood Stud & Concrete Installation: The Samsung WMN-M10E comes with the appropriate hardware to mount the bracket to wood studs or a concrete wall. The included wall bracket plate supports 16" OC wood studs (24" OC is not supported) using the supplied hardware. In addition, anchors are supplied for concrete wall installation.
Level Adjustment: Once your QLED TV is installed on the No Gap Wall-Mount, you can level up the TV by adjusting the horizontal level of the WMN-M10E from 1° to 2°. If you cannot level up the TV with this adjustment, then you need to reinstall the bracket to the wall and TV.
9.75' AC Power Cord: The Samsung QLED TV only comes with a detachable 5' AC power cord. The Samsung WMN-M10E No Gap Wall-Mount includes a longer 9.75' detachable AC power for greater flexibility and to make it easier to power your TV. The included AC power cord is fitted with a right-angle AC plug that sits 0.9375" from the wall.
Cable Management: A 59" rubber cable management channel is provided to route the QLED TV's power cord and proprietary optical cable through for a clean and neat looking installation. Self-adhesive strips are include to adhere the cable management channel to your wall.
Q Crutchfield asked: Why did you buy this?