About the Samsung WMN-R30EB No Gap Wall Mount
Samsung's "no-gap" mounting solution
The Samsung WMN-R30EB No Gap Wall Mount is designed specifically to mount Samsung's 82" and larger 2019 and 2018 QLED TVs. Compatible 2019 model: the 82Q90R.
Samsung's No Gap Wall Mount offers an easy way to position select 82" and larger Samsung QLED TVs flush against the wall.
The minimal gap between wall and TV is possible because the part that attaches to the TV fits a carved out area on the back of the set. That means you can install your TV close to the wall, leaving a thin profile and a clean look.
This no-gap design still allows you to tilt your Samsung QLED TV downward 5°. This means you can mount your TV high on the wall — like over a fireplace — and tilt it downward for a better viewing angle.
- designed specifically to wall-mount 2018 & 2019 82" and larger Samsung QLED TVs
- 2019 models: Q90R (82"), Q900R (82" & 98")
- 2018 model: Q900R (85")
- TV weight limit: 176 lbs.
- mounts your TV to the wall with a gap of just 1/4"
- tilt mechanism allows you to tilt the TV downward 5° for a better viewing angle
- stud-mounting required (included wall bracket plates work with 16" OC studs only)
- hardware included for mounting the bracket to wood studs or a concrete wall
- Note: This wall-mount bracket does not support standard VESA mounting patterns and is only compatible with the Samsung QLED TVs listed above
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # WMN-R30EB/ZA
What's in the box:
- 2 Wall-brackets
- 2 TV brackets
- Eight M6x10mm bolts
- 8 Washers
- 4 Threaded-post adapter
- 4 Thumb-screws
- 12 Lag-bolts
- 12 Concrete anchors
- 4 Self-adhesive foam blocks
- 7 White stickers
- Wall-Mount Template
- Installation Guide
- Installation Requirements
- "Cautions When Installing" booklet
- Warranty Information
Samsung WMN-R30EB No Gap Wall Mount reviews
Thanks for submitting your review
More details on the Samsung WMN-R30EB No Gap Wall Mount
TV Compatibility: The Samsung WMN-R30E No Gap Wall-Mount is designed specifically to wall mount select 2018-2019 Samsung 82"-98" QLED TVs (all mounting hardware included).
- 2019 Models: Q90R Series (82"), Q900R (82"/98")
- 2018 Models: Q900R Series (85")
Notes: This wall-mount bracket does not support standard VESA mounting patterns and is only compatible with the Samsung QLED series TVs listed above.
No Gap Design: The Samsung WMN-R30E mounts your compatible Samsung QLED TV to the wall with nearly no gap (0.275" or more based on model TV, wall type, and installation). The distance between the wall and the left or right side of the TV may be different depending on the wall and installation conditions. A larger gap between the back of the QLED TV and the wall may occur if the wall is not 100% flat or is constructed off angle to the floor (or if the wall-mount installation is done incorrectly).
Tilt Mechanism: The Samsung WMN-R30E No Gap Wall-Mount allows you to tilt your Samsung QLED series TV downward 5-degrees. This allows you to mount your TV high on the wall (like over a fireplace) and tilt it downward for a better viewing angle.
Wood Stud & Concrete Installation: The Samsung WMN-R30E comes with the appropriate hardware to mount the bracket to wood studs or a concrete wall. The included wall bracket plate supports 16" OC wood studs (24" OC is not supported) using the supplied hardware. In addition, anchors are supplied for concrete wall installation.
- TV Brackets Dimensions: 6.6875" (w) x 7.0.625" (h) x 0.625" (d)
- Wall Brackets Dimensions: 20.5" (w) x 5.4375" (h) x 0.6875" (d)
Level Adjustment: Once your QLED TV is installed on the No Gap Wall-Mount, you can level up the TV by adjusting the horizontal level of the WMN-R30E (the maximum limit for horizontal adjustment is 0.394"). If you cannot level up the TV withing this range of adjustment, then you need to reinstall the bracket to the wall and TV.
1 question already asked