About the Kanto FM100
Bring your TV to eye level
Bring your TV to eye level
A TV mounted above a fireplace can look great. But continually looking up to watch that TV can get uncomfortable — fast. And you might not be viewing it at an angle that lets you enjoy the best picture quality. The Kanto FM100 lets you simply pull down your fireplace-mounted TV to watch it at eye level. And when you're done, push it back in place and out of the way.
Swivel and tilt
The gas-shock arm lets you easily position your TV. As you lower your TV, extends it away from the wall, keeping it clear of any heat source in the fireplace.
The FM100 can be tilted down as much as 5° to eliminate glare. And once the mount's extended, you can swivel your TV up to 30° in either direction.
Great for home or office
The mount includes a built-in bracket for a sound bar. Paintable covers hide the wall assembly, making for a more finished appearance when your TV's pulled down.
The FM100 is also great for schools and businesses. Keep your display monitor up and out of the way when not used for presentations or lectures.
- designed for TVs 42"-65"
- supports screens weighing 11-62 lbs.
- holds TV 4-3/4" from wall when retracted
- clearance from back wall: up to 20-3/16"
- adjustable gas-shock arm with up to 29" vertical range
- swivel range: up to 30° in either direction
- tilt range: -10° to +5°
- built-in sound bar attachment
- paintable covers to hide wall assembly
- 26-3/4" dual stud wall plate accommodates up to 24" stud spacing
- mounting hardware included
- dimensions when retracted: 27"W x 29"H x 4-3/4"D
- weight: 26.5 lbs.
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # FM100
What's in the box:
- Pull-down mechanism
- Wall-mount bracket
- Horizontal TV bracket
- 2 Vertical TV brackets
- 4 TV locking brackets
- Horizontal soundbar bracket
- 2 Vertical soundbar brackets
- Pull-down handle
- Four M5x15mm bolts
- Four M5x30mm bolts
- Four M6x15mm bolts
- Four M6x30mm bolts
- Four M8x20mm bolts
- Four M8x35mm bolts
- Four M8x50mm bolts
- Nine M5/M6 washers
- Eight 5mm spacers
- Four 13mm spacers
- Six Lag-bolts
- 6 Anchors
- Six M8 washers
- 5 Hex-nuts
- 2 Flanged-nuts
- Two M6x15mm bolts
- Eight M6x8mm bolts
- Two M4x25mm bolts
- Four M5x8mm bolts
- Four M8x60mm bolts
- Arm lock-pin
- 3 Zip-ties
- 4 Covers
- 2 Hex-keys
- User Manual
- Mounting Template
Kanto FM100 reviews
Thanks for submitting your review
More details on the Kanto FM100
TV Compatibility: The Kanto FM100 pull-down fireplace mounting bracket supports 42" to 65" flat-panel TVs that weigh up to 62 lbs. The TV must also meet the following VESA and screw size requirements.
- VESA Sizes: 100x100mm to 600x500mm
- Screw Size: M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Solid Steel Construction: The Kanto FMC1 full-motion corner wall-mount TV bracket is constructed out of solid steel and features a black powder-coated finish.
Over The Fireplace Installation: The Kanto FM100 is designed to be installed above a fireplace or mantel. The FM100's dual-stud wall plate can be installed on wood stud, concrete, or brick walls. The mount supports up to 24" stud spacing. Tools required for installation include -
- 7/32" bit (wood), 3/8" bit (masonry)
- Socket wrench
- Phillips screwdriver
- Stud finder
- Tape Measure
Pull-Down Handle: To allow for a better viewing angle of your TV that is mounted over the fireplace, the FM100 is equipped with a padded pull-down handle. The mount's gas-shock arm allows you to pull your TV down 29", with up to 20.25" of horizontal clearance. The maximum vertical pull-down distance can also be adjusted to avoid contact with your mantel (see User Manual). When you are not using your TV, you can raise your mounted television up and out of the way to maintain a tidy living space.
Tilt & Swivel: The FM100 offers up to 30° of swivel in either direction, and comes equipped with a quick-tilt mechanism that provides +10° to -5° of tilt. You can easily position your TV to accommodate angled seating arrangements and to reduce glare.
Cable Management: Plastic wall plate covers are included to hide any sign of installation, while cable management clips and zip-ties are provided to conveniently route your cables.
Soundbar Compatible: Complete your low-profile AV setup by attaching a soundbar to the bottom of brackets of the Kanto FM100. Several mounting slots are provided to ensure compatibility with various soundbar models. Mounting hardware and screws are not included for your soundbar.
2 questions already asked