Chat
Contact us
Close contact box
Connect ID #
903 945 387 4
Connect ID #
903 945 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kanto PDX650 Full-motion mount for TVs 37"-75" (Black)

Item # 310PDX650

The PDX650 can hold your TV as close as 2" to the wall — or extend it as far as 21-7/8" into your room.

The PDX650 can hold your TV as close as 2" to the wall — or extend it as far as 21-7/8" into your room.

4 questions - 5 answers

Item # 310PDX650

In stock
$179.99

Other options

About the Kanto PDX650

Ralph Graves

Position your wall-mounted TV for optimal viewing

With its articulated arms fully retracted, the Kanto PDX650 mount holds your TV just 2" from the wall. Extended, it can hold your TV as far as 21-7/8" into your room. You can swivel your mounted TV 80° in either direction, depending on the size of the screen. You can also tilt your mounted TV up or down to avoid glare.

Position your wall-mounted TV for optimal viewing

With its articulated arms fully retracted, the Kanto PDX650 mount holds your TV just 2" from the wall. Extended, it can hold your TV as far as 21-7/8" into your room. You can swivel your mounted TV 80° in either direction, depending on the size of the screen. You can also tilt your mounted TV up or down to avoid glare.

This solid steel mount has a durable powder coat finish. Raceways keep cables and cords securely fastened to the arms. The PDX650 can support TVs with screen sizes between 37" and 75" and weighing up to 125 lbs.

READ LESS

Product highlights:

  • designed for TVs 37"-75"
  • supports up to 125 lbs.
  • articulated arms extends TV 2" to 21-7/8"
  • swivel range: ±80°
  • tilt range: -15° to +3°
  • hollow raceways secure cables and cords to arms
  • wall plate accommodates up to 16" stud spacing
  • stud mounting required
  • mounting hardware included
  • solid steel construction with powder coated finish
  • 23-5/8"W x 15-3/4"H x 2"-21-7/8"D
  • weight: 22.5 lbs.
  • warranty: 5 years
  • MFR # PDX650

What's in the box:

  • Wall-mount bracket w/ articulating arm assembly
  • Center TV bracket
  • 2 Vertical TV brackets
  • 2 Horizontal TV brackets
  • 4 Covers
  • Four M5x12mm bolts
  • Four M5x30mm bolts
  • Four M6x16mm bolts
  • Four M6x35mm bolts
  • Four M8x20mm bolts
  • Four M8x35mm bolts
  • Four M8x50mm bolts
  • Four 5mm spacers
  • Four 10mm spacers
  • Four 14mm spacers
  • Four M5/M6 washers
  • Four M8 washers
  • Four M8x65mm lag-bolts
  • 4 Anchors
  • Hex-key
  • Wrench
  • User Manual
  • Mounting Template

Customer reviews for Kanto PDX650

Loading reviews...

Average review:

5.0 out of 5 stars
66 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kanto PDX650

Stacey B.

Features & specs

Features
Mount Type Wall Mount
Motion
Tilt Yes
Swivel Yes
Extend/Retract Yes
Fixed No
Roll (Level) Adjustment Yes
Mounting Details
Wood Stud (Single) No
Wood Stud (Dual, 16-inch) Yes
Wood Stud (Dual, 24-inch) No
Concrete Block-compatible Yes
Recessed Housing No
Outdoor-rated No
Motorized No

Product Research

Features

TV Compatibility: The Kanto PDX650 full-motion wall-mount bracket supports 37" to 75" flat-panel TVs that weigh up to 125 lbs. The TV must also meet the following VESA and screw size requirements.

  • VESA Sizes: 100x100mm to 600x400mm
  • Screw Size: M5, M6, or M8

Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Solid Steel Construction: The Kanto PDX650 full-motion TV wall-mount bracket is constructed out of solid steel and features a powder-coated finish (available in black or white).

Full-Motion Design: The Kanto PDX650 features a full-motion design that accommodates a variety of TV viewing positions. The PDX650 offers extension, tilt, swivel, and roll adjustments.

  • Extension: Even with its low-profile design the PDX650 can extend up to 21.8125" from the wall, giving you plenty of room for tilting and swiveling your TV, or for reaching out from alcoves. Its unique tilt head is designed to nestle into the frame, letting you push your flat-panel TV within 2" of the wall.
  • Tilt: The accessible tilt mechanism makes it easy to angle your TV up to 15° forward or 3° backward. Once you've found the best viewing angle, tighten the nuts to secure your TV in place.
  • Swivel: The wall-mount bracket's articulating arms allow you to pivot your TV up to 80° in either direction, depending on your TV size, allowing you to achieve the perfect viewing angle.
  • Roll: You can also raise and lower (+/-3°) the the sides of the TV to make sure the TV is level once it is mounted on the wall.

Integrated Cable Management: Four cable management channels are attached to the bottom of the articulating arms. These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides - whatever works best for your specific application.

Dual-Stud Installation: The Kanto PDX650 full-motion TV wall-mount bracket can accommodate 16" stud spacing, and comes with all the hardware you need for wood stud and concrete installation. Tools required for installation include -

  • Drill
  • 7/32" bit (wood), 3/8" bit (masonry)
  • Socket wrench
  • Phillips screwdriver
  • Hammer
  • Stud finder
  • Level
  • Pencil
  • Tape Measure

Loading accessories...

Customer Q&A

4 questions already asked

Q
Will this mount work on a Sony XBR-65/55X930E TV?
thomas  Sep 15, 2023
1 answer
A
Greetings Thomas, thank you for your question. Yes, this mount will work on both the 55 and 65 inch Sony X930E.
hogan  Sep 16, 2023 (Staff)
Q
Can a sound bar hang from this? We already mounted our Tv and now want to add one? Is there a kit to add to this or something?
stacy  Nov 05, 2022
1 answer
A
Potentially, Stacy. This Kanto PDX650 full motion mount has a total weight limit of 125 lbs. As long as your TV and soundbar/soundbar mount add up to less than that we are fine here. We have two universal options that work with the Kanto PDX650 and soundbars that can be wall mounted, take a gander below! First up is the Sanus SA405 Sound Bar Speaker mount. The second option is also by Sanus, the more robust and adjustable SA405. Both of these should work well with the Kanto mount! https://www.crutchfield.com/p_051SA405/Sanus-SA405-Sound-Bar-Speaker-Mount.html https://www.crutchfield.com/p_051SA405/Sanus-SA405-Sound-Bar-Speaker-Mount.html
bo  Nov 05, 2022 (Staff)
Q
Can this be used in a corner?
jeff  Jul 21, 2022
1 answer
A
This can Jeff, but you'd have to choose a side wall on either side of the corner to mount the flat rear bracket. This needs to mount solidly on two studs, then you could use the articulation on the mount to place the tv centered in the corner. If your TV is less than 65" and the rear mount pattern matches your TV you could also consider this Chief TS318SU THINSTALL mount. This mount has similar articulation and only one single rear mount that could be placed deeper into the corner on solid stud. Take a look in the link below! https://www.crutchfield.com/p_051TS318SU/Chief-TS318SU-THINSTALL.html
bo  Jul 21, 2022 (Staff)
Q
I have the following LG OLED65B7A, has anyone used this mount with an LG OLED TV and if you please share your experience, good or bad? Thanks.
khilnak  Nov 30, 2020
2 answers
A
Yes, we used for a 50-55" inch LG LED model. We normally by a Sanus mount which is much more expensive, but we had a problem finding the model we liked. After researching this Kanto model, we purchased and installed ourselves. I would recommend you follow the video tutorial they offer on-line as opposed to the instructions that come with the mount. We recommend this mount!
ramona  Dec 08, 2020
A
Don't have an LG but the mount is fits most mount patterns 200x 200 to 400x600. Using this mount on 2 Samsungs 55" (new) with 200x200 pattern and 8 yr old 46" with 400x400. Mount is great no issues with weight have a Sonos playbar on the 55", moves super easily and does not settle, creep or anything like that. Tilt is easy to set and rotation is simple. Wall mounting bracket is also adaptable, mounted one one 2x4 eighteen inches on center, the other on standard sixteen on center. Cable brackets work well and are easy to use.
derick  Dec 07, 2020

Loading articles...

Compare the sound