Contact us
Close contact box

Kanto PMX700

Full-motion mount for TVs 42"-100"

Item # 310PMX700

This Kanto mount holds TVs as large as 100", and its articulating design gives you lots of adjustability.

This Kanto mount holds TVs as large as 100", and its articulating design gives you lots of adjustability.

Need help?
Contact our Virginia-based experts.

Item # 310PMX700

Ships free

In stock
$329.99

Other options

About the Kanto PMX700

Position your wall-mounted TV for optimal viewing

Want to wall-mount a large flat-panel TV? The rugged Kanto PMX700 is up to the task. With its articulated arms fully retracted, the mount holds your TV just 2-3/8" from the wall. Extended, it can hold your TV as far as 31-3/8" into your room. You can swivel your mounted TV 90° in either direction. You can also tilt your mounted TV up or down to avoid glare.

Position your wall-mounted TV for optimal viewing

Want to wall-mount a large flat-panel TV? The rugged Kanto PMX700 is up to the task. With its articulated arms fully retracted, the mount holds your TV just 2-3/8" from the wall. Extended, it can hold your TV as far as 31-3/8" into your room. You can swivel your mounted TV 90° in either direction. You can also tilt your mounted TV up or down to avoid glare.

This solid steel mount has a durable powder coat finish. Raceways keep cables and cords securely fastened to the arms. The PMX700 can support TVs with screen sizes between 42" and 100" and weighing up to 150 lbs.

READ LESS

Product highlights:

  • designed for TVs 42"-100"
  • supports up to 150 lbs.
  • holds your TV as close as 2-5/8" from wall, or as far away as 31-3/8"
  • swivel range: ±90°
  • tilt range: -12° to +3°
  • horizontal offset: ±11"
  • hollow raceways secure cables and cords to arms
  • wall plate accommodates up to 24" stud spacing
  • stud mounting required
  • mounting hardware included
  • solid steel construction with powder-coated finish
  • 32-7/16"W x 19-11/16"H x 2-5/8"-31-3/8"D
  • weight: 44.5 lbs.
  • warranty: 10 years
  • Our 60-day money-back guarantee
  • MFR # PMX700

What's in the box:

  • Wall-mount bracket with articulating arm assembly
  • 2 Horizontal TV brackets
  • 2 Vertical TV brackets
  • TV support bracket
  • Four M5x12mm bolts
  • Four M5x30mm bolts
  • Four M6x16mm bolts
  • Four M6x35mm bolts
  • Four M8x20mm bolts
  • Four M8x35mm bolts
  • Four M8x50mm bolts
  • Four 5mm spacers
  • Four 10mm spacers
  • Four 14mm spacers
  • Four M5/M6 washers
  • Four M10 washers
  • 6 Lag-bolts
  • 6 Anchors
  • 2 Hex-keys
  • User Manual
  • Mounting Template

Customer reviews

Loading reviews...

Kanto PMX700 reviews

Average review:

1 review

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Kanto PMX700

Stacey B.

Product Research

Features

TV Compatibility: The Kanto PMX700 full-motion wall-mount bracket supports 42" to 100" flat-panel TVs that weigh up to 150 lbs. The TV must also meet the following VESA and screw size requirements.

  • VESA Sizes: 200x100mm to 700x500mm
  • Screw Size: M5, M6, or M8

Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Solid Steel Construction: The Kanto PMX700 full-motion TV wall-mount bracket is constructed out of solid steel and features a black powder-coated finish.

Full-Motion Design: The Kanto PMX700 features a full-motion design that accommodates a variety of TV viewing positions. The PDX650 offers extension, tilt, and swivel.

  • Extension: The PMX700 easily reaches out over mantels or out of recessed locations with 31.3125" of extension. When fully retracted the low-profile design of the PMX700 sits your TV only 2.625" from the wall.
  • Swivel: You can swivel your mounted TV 90° to the left or right to achieve the best viewing angle regardless of where you are sitting in the room. The maximum swivel range will depend on the screen size of your TV. Smaller screen sizes will have a greater swivel range, while bigger screen sizes will have a smaller swivel range.
  • Tilt: The bracket lets you effortlessly tilt your TV 12° forward or 3° backward for a better viewing angle when your TV is mounted above or below eye level. The maximum tilt range will depend on the screen size of your TV. Smaller screen sizes will have a greater tilt range, while bigger screen sizes will have a smaller tilt range.

Integrated Cable Management: Four cable management channels located on the bottom of each mounting arm help to route your cables up to your TV and keep your viewing area looking neat.

Dual-Stud Installation: The Kanto PMX700 full-motion TV wall-mount bracket can accommodate up to 24" stud spacing, and comes with all the hardware you need for wood stud and concrete installation. Tools required for installation include -

  • Drill
  • 1/4" bit (wood), 5/8" bit (masonry)
  • Socket wrench
  • Nut driver
  • Phillips screwdriver
  • Hammer
  • Stud finder
  • Level
  • Pencil
  • Tape Measure

Installation Adjustments: The PMX700 offers Horizontal Offest, allowing you to center your TV on the wall regardless of where your studs are located by adjusting the molunt's articulating arm assembly 11" left or right. You can also raise and lower (+/-3°) the the sides of the TV to make sure the television is level once it is mounted on the wall.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
I want to wall mount a new larger TV. This mount had the muscle and the reach I needed. Luke was very helpful with his advice. [ Don L  Jul 22, 2019 ]

Loading articles...

TOP