About the Kanto PS300
Single-stud mounting for more placement options
Single-stud mounting for more placement options
The Kanto PS300 TV wall mount attaches to a single stud — ideal for rooms with irregular or non-standard wall stud spacing. When fully retracted, this mount holds your TV less than 2" from the wall. Extended, it can hold your TV as far as 22" into your room.
You can swivel your mounted TV 90° in either direction, depending on the size of the screen. You can also tilt your TV up or down to avoid glare, and level it horizontally after installation.
This solid steel mount has a durable powder-coated finish. Clips keep cables and cords securely fastened to the arms. The PS300 can support TVs with screen sizes between 26" and 60" and weighing up to 88 lbs.
Product highlights:
- designed for TVs 26"-60"
- supports up to 88 lbs.
- fits VESA mounting hole patterns from 100 x 100mm to 400 x 400mm
- holds TV as close as 1-15/16" from the wall
- articulated arm extends outward up to 22"
- swivel range: ±90°
- tilt range: -12° to +2°
- clips secure cables and cords to arms
- adjustable horizontal leveling after mounting
- stud mounting required
- magnetic wall plate covers
- solid steel construction with powder-coated finish
- 15-3/4"W x 15-3/4"H x 1-15/16"D (up to 22"D fully extended)
- weight: 13.4 lbs.
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # PS300
What's in the box:
- Wall-mount bracket w/ articulating arm assembly
- TV bracket
- 4 Extension brackets
- 2 Covers
- Four M4x16mm bolts
- Four M4x25mm bolts
- Four M5x16mm bolts
- Four M5x25mm bolts
- Four M6x16mm bolts
- Four M6x25mm bolts
- Four M8x20mm bolts
- Four M8x35mm bolts
- Four M8x50mm bolts
- Eight 5mm spacers
- Four 14mm spacers
- Four M4/M5/M6 washers
- Four M8 washers
- Four M8x65mm lag-bolts
- 4 Concrete anchors
- Hex-key
- Installation Manual
- Mount Template
Reviews
Customer reviews
Loading reviews...
Kanto PS300 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kanto PS300
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Wall Mount | |
| Motion | ||
| Tilt | Yes | |
| Swivel | Yes | |
| Extend/Retract | Yes | |
| Fixed | No | |
| Roll (Level) Adjustment | Yes | |
| Mounting Details | ||
| Wood Stud (Single) | Yes | |
| Wood Stud (Dual, 16-inch) | No | |
| Wood Stud (Dual, 24-inch) | No | |
| Concrete Block-compatible | Yes | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
TV Compatibility: The Kanto PS300 full-motion wall-mount bracket supports 26" to 60" flat-panel TVs that weigh up to 88 lbs. The TV must meet the following VESA and screw size requirements.
- VESA Sizes: 100x100mm to 400x400mm
- Screw Size: M4, M5, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Solid Steel Construction: The Kanto PS300 full-motion TV wall-mount bracket is constructed out of solid steel and features a powder-coated finish (available in black or white).
Full-Motion Design: The Kanto PS300 features a full-motion design that accommodates a variety of TV viewing positions. The PS300 offers extension, tilt, swivel, and roll adjustments.
- Extension: The PS300 extends 22" from the wall to give you a variety of viewing options. When pushed back into place, your TV sits less than 2" from the wall. When pushed back against the wall, the center of the TV plate is centered with the wall mount.
- Tilt:With 12° of forward tilt and 2° of backwards tilt, the PS300 makes it easy to angle your TV just the way you want it for the perfect viewing angle in your home or office.
- Swivel: The articulating arms on the PS300 allow you to swivel your TV 90° in either direction when mounted on a wall, and over 180° when mounted on a corner or post. The swivel range will vary depending on the TV's screen size.
- Roll: You can also raise and lower (+/-3°) the the sides of the TV to make sure the TV is level once it is mounted on the wall.
Wire & Cable Management: An integrated cable management system allows you to route your power and audio/video cables neatly between the TV and the wall. Magnetic covers attach to the wall plate to hide the lag-bolts and give you a clean, modern look.
Single Stud Installation: The Kanto PS300 full-motion TV wall-mount bracket mounts to a single wood stud. Mounting hardware is included for wood stud, brick, and concrete installations. Tools required for installation include -
- Drill
- 7/32" bit (wood), 3/8" bit (masonry)
- Socket wrench
- Nut driver
- Phillips screwdriver
- Stud finder
- Level
- Pencil
Loading accessories...
Customer Q&A
Loading articles...
ThIs is a very well built wall mount, very robust. The box of mounting hardware with different size screws and washers was great. Good directions.
Rex from Lewistown, MT