GoldenEar Triton Seven

Features

Triton Series: GoldenEar Technology's Triton Series consist of high-performance floorstanding loudspeakers that are efficient and can be driven to loud listening levels with moderate amplifier power, but are also able to handle the output of very powerful amplifiers. The Triton Series floorstanding speakers are engineered for superb performance in both two-channel stereo systems, as well as in multi-channel home theater systems. The Triton Series delivers powerful, deep bass blended perfectly with silky, smooth, and transparent midrange and high frequencies for an exceptional listening experience.

High-Velocity Folded Ribbon (HVFR) Tweeter: The hallmark of all GoldenEar speakers, the Triton Series floorstanding speaker utilizes GoldenEar's own High-Velocity Folded Ribbon (HVFR) tweeter design. This new folded-ribbon tweeter is silky smooth with ultra high resolution capability. The HVFR tweeter propagates sound waves and moves the air by squeezing it with its accordion-like pleated diaphragm, rather than pushing it as conventional drivers do. Greater efficiency, lower distortion, improved dynamics and superbly detailed sound are the result of this amazing technology.

Dual 5.25" Midrange/Bass Drivers: A D'Appolito array of two 5.25" long-throw midrange/bass drivers surround the High Velocity Folded Ribbon (HVFR) tweeter. Theses spiderleg cast-basket midrange/bass drivers, newly developed at GoldenEar Technology's Arnprior, Canada engineering facility, have been specifically designed for exceptionally long-throw with tremendous dynamic range and extraordinarily deep bass response. Their precisely curved cone combined with a specially formulated polypropylene cone material and unique apical glue bonding technique delivers superb high-definition midrange clarity and presence.

Infrasonic Planar Sub-Bass Radiators: The Triton Seven incorporates two side-mounted opposing, inertially-balanced 8" planar sub-bass radiators, located on either side of the cabinet down near the floor for optimum coupling to the room (one bass radiator on each side of cabinet). These infrasonic planar sub-bass radiators help the speaker provide bigger, deeper bass that is accurate with low distortion.

Unique Cabinet Shape: The Triton Seven’s unique cabinet shape is both acoustically purposeful as well as strikingly attractive. Its narrow front baffle and stylish rearward rake, in conjunction with the complex crossover, both aligns the driver array precisely for a coherent wave-launch directed at ear level at the listening position, as well as results in non-parallel front and rear baffles for better control of internal standing waves. And, the non-parallel side cabinet walls and slanted top provide the same acoustical performance benefit.

Binding Post Terminals: The Triton Seven floorstanding loudspeaker is outfitted with a set of 5-way binding post terminals that will accept bare wire (up to 10AWG), pin-connectors, spade-lugs, and banana plugs (single or dual).

Placement Options: The GoldenEar Technology Triton Series floorstanding loudspeaker is designed to allow flexible placement while providing a very large window of sound throughout your listening room. To ensure the best performance possible, observe the following placement guidelines -

• For the most accurate and natural timbre, the speaker's high-frequency drivers should be at approximately ear level. A pair of Triton Series speakers should form a equilateral triangle between each other and the main seated listening position. To further optimize imaging, turn a pair of speakers inward (toe-in) so they point toward the listening position with their axes crossing just behind it.
• Placing the speaker in a corner will over-emphasize bass and reduce overall clarity. If possible, position the loudspeaker 8" or more from the wall behind the speaker and as much as possible from either side wall. This will ensure better bass performance and optimal midrange clarity. If this is not, use the subwoofer level control on the back of the speaker to adjust for optimum sound in your room.
• When used as surround speakers, the Triton Series speaker may be located on the side or behind the main listening area. When used on the sides, take care never to locate the speaker forward of the main listening position. If the speaker is placed along the rear wall as surrounds, it is suggested that the speaker be positioned fairly wide apart if possible. For instance, if there is a couch in the center of the rear wall on which the listeners will sit, try to position the speaker wider apart than the couch.

Rubber & Spike Feet: The GoldenEar Technology Triton Series floorstanding loudspeaker comes with a set of rubber feet for placement on hardwood, laminate, vinyl, or tile flooring. Spike feet are also included to provide greater stability when placing the loudspeaker on carpeting. Using spikes on wood or other hard-surface floors which are susceptible to being scratched can cause damage to the floor.

• Dimensions With Rubber Feet: 10.5" (w) x 40.5" (h) x 14.5" (d)
• Dimenions With Spike Feet: 10.5" (w) x 41.0" (h) x 14.5" (d)

Note: Always use the speaker with the the included rubber or spike feet installed for optimum performance and maximum stability. The rubber feet come pre-installed and will need to be removed in order to install the spike feet.