About the eufy by Anker RoboVac G30 Verge
This smart vacuum takes a systematic approach
This smart vacuum takes a systematic approach
The eufy RoboVac G30 Verge can make your life easier. Charge it and let it work for an hour — you'll find the evidence in its dustbox. The G30 uses smart navigation for accurate, complete cleaning patterns when it vacuums your floors. It maps its work as it goes, avoiding the random repetition and omission inherent in simpler bounce-navigation systems.
Even with its impressive 2000Pa suction power, the G30's average operating noise is only about as loud a microwave. So you may hardly notice it, even when you're working in the same space.
Taking care of you by taking care of itself
Using the onboard BoostIQ™ technology, the G30 automatically increases its suction power when, for example, it moves from a tile floor to a rug. It senses edges and ledges, so it won't fall down the steps. And if you block off an area with the included magnetic boundary strip, the G30 won't cross that line.
The G30 knows when it's almost out of power, and automatically returns to the included charging station. If it gets into a bind, it automatically shuts off, rather than burning out its motors. And if it shuts off and you can't find it, it will beep so you can rescue it.
Control with app and voice
The free EufyHome app lets you schedule the G30 and even see precisely where it has cleaned. You can choose between auto and spot cleaning modes. Auto mode works systematically until the G30 needs to charge. Spot mode works well for a specific mess by working in a tight spiral pattern for two minutes. And you can override the modes and control it manually using the four directional arrows within the app.
You can also use Google Assistant or Amazon Alexa devices (sold separately) to control the G30. It definitely beats pushing a vacuum.
- 3-layer filter gets your floors clean
- effective vacuuming for hardwood floors to medium-pile carpet
- smart dynamic navigation
- path-tracking sensor maps cleaning history
- plots accurate cleaning patterns automatically
- 100-minute maximum run-time
- 5-6 hour charge time
- auto dock and recharge
- tap "Find my robot" in the EufyHome app to make unit beep if it gets lost
- included 6.6-foot magnetic boundary strip for blocking off areas from the RoboVac
- drop sensor prevents unit from falling off steps or ledges
- can pass under 2-7/8" heights
- quiet operation — about the same noise level as a microwave
- 2000Pa suction
- 3 suction modes:
- selecting BoostIQ™ in the EufyHome app while in standard mode automatically increases suction when needed for different surface
- dual rotating side brushes sweep dust into vacuum path
- 0.6L dustbox
- 2 cleaning modes:
- control with top-mounted buttons or free EufyHome app
- works with Google Assistant and Amazon Alexa devices (sold separately)
- 12-13/16"W x 2-7/8"H x 12-13/16"D
- weight: 6.39 pounds
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # T2252Z11
What's in the box:
- Robot vacuum cleaner (black)
- Charging base
- AC adapter with attached 6' DC output cord (DC output: 19V 0.6A)
- 2 Side brushes
- Cleaning tool
- Five 8" cable ties
- Boundary strip (3/4" x 6.6')
- Adhesive strips
- Owner's Manual (English)
- Owner's Manual (Spanish)
- Quick Start Guide
- Limited Warranty
- Dear New RoboVac Owner
- Boundary Strips User Guide
Thanks for submitting your review
More details on the eufy by Anker RoboVac G30 Verge
Overview: The eufy RoboVac G30 Verge features Smart Dynamic Navigation 2.0 for faster and more thorough cleaning. The vacuum connects to your home Wi-Fi network and the EufyHome app to help you keep track of where it has cleaned. You can also control the G30 Verge through Alexa and Google Assistant. The vacuum cleaner is 12-3/4" in diameter and only 2-7/8" tall, so it can clean under some furniture. The RoboVac comes with a charging dock, side brushes, boundary strips, and a cleaning tool, and is covered by a 1-year warranty.
Functionality: RoboVac is a self-propelled, automatic vacuum cleaner that travels around your room in an orderly pattern while cleaning up dirt and debris. Typically, it moves from one end of the room to the other, making 180° turns when it reaches the wall. Nine built-in infrared sensors make RoboVac aware of its surroundings. Two side brushes and a roller brush sweep the dirt into the suction inlet on the bottom and into the dust collector. The dust collector has a capacity of 600ml or about 2-1/2 cups. When the cleaning job is completed, the RoboVac returns automatically to the charging base. RoboVac G30 Verge is ideal for cleaning hardwood, tile, and laminate floors, as well as medium-pile carpets. It is not recommended for high-pile carpets or very dark-colored carpet.
Precautions: RoboVac G30 Verge is not recommended for cleaning in wet areas. Power cords on the floor in the should be bundled up with wire ties (five 8" wire ties are included) to prevent entanglement. You should fold tassled edges of area rugs underneath to prevent them from getting tangled in RoboVac's brushes. Areas with clearances under 2-7/8" should be blocked with a physical barrier to prevent RoboVac from getting stuck. Anti-drop sensors will prevent RoboVac from tumbling down stairs or steep drops. Sensors become less effective when they get dirty, or if used on carpeted, reflective, or very dark floors. A boundary strip should be used in those cases.
Smart Dynamic Navigation 2.0: The RoboVac G30 Verge uses its Path Tracking Sensor to follow a more accurate and purposeful route around your home. Smart Dynamic Navigation 2.0 results in better coverage, compared to random path robotic vacuums, so it gets the job done faster.
Spot Cleaning: When intensive cleaning is needed in a small area, the Spot Cleaning mode sweeps in a spiral pattern for approximately 2 minutes. You can activate Spiral Mode using the EufyHome app, or by pressing the Spot Cleaning button on the top of the unit.
Boundary Strip: The included boundary strip helps keep RoboVac away from specific areas in the room, such as area rugs. Dual sensors in the vacuum will recognize the Boundary Strip and prevent it from crossing the boundary. The strip is 3/4" wide and 6.6 feet (2 meters) in length, and can be cut to length. Adhesive strips are included for securing the Boundary Strip to the floor.
Voice Alerts: RoboVac G30 Verge emits specific voice prompts and alerts whenever an error or issue occurs. Many of the voice alerts are prompted by an impediment preventing the vacuum to move (front bumper stuck, wheel stuck, device trapped, wheel suspended). Other voice prompts involve battery issues (low battery, charging base is blocked, battery error). The Voice Alerts will continue periodically until the issue is resolved.
Suction Power: RoboVac has a maximum of 2000Pa (Pascal) of suction power at its highest setting (Max). There are three power levels: Standard (default), Turbo, and Max.
BoostIQ: When BoostIQ is selected, the RoboVac will automatically increase the suction power if it detects more power is needed for effective cleaning. BoostIQ is ideal for hard-to-sweep messes or thicker carpets.
Wi-Fi: The RoboVac G30 Verge is equipped with Wi-Fi (802.11b/g/n - 2.4GHz band). The EufyHome app lets you control the RoboVac with your smartphone or tablet. With the app, you can start, pause, and stop cleaning. You can also schedule RoboVac to start cleaning at a particular time, or regularly clean on a schedule. The EufyHome app is available from Google Play for Android devies 5.0 and up, and from the App Store for iPhone, iPad, or iPod touch running iOS 9.0 or later.
Voice Assistant Control: RoboVac G30 Verge can be controlled with voice commands if you have Amazon Alexa or the Google Assistant.
Rechargeable Battery: RoboVac has a 14.4-volt, 2600mAh Lithium-Ion rechargeable battery. The battery charges whenever the vacuum cleaner is docked in the Charging Base. The Charging Base should be placed on a level surface and against a wall. Objects should be removed within an area 3 feet to either side and 6 feet in front of the opening of the Charger Base. Two charging pins on the bottom of the vacuum cleaner contact the charging contacts on the Charging Base when docked. The RoboVac automatically returns to the Charging Base at the end of a cleaning cycle, or when the battery is running low. An exhausted battery is fully charged in 5 to 6 hours. Fully charged, the RoboVac can clean for a maximum of 100 minutes. The battery life is reduced whenever the higher power modes are used, or how much BoostIQ is used.
Washable Filter: The RoboVac's filter can be washed under running water for at least one minute, and allowed to dry for 24 hours. It should be cleaned once a week, or twice a week if you have pets. A spare filter is included, and can be used while the other filter is drying, or to replace the original filter. The filter should be replaced after every 50 rounds of cleaning.
Regular Maintenance: Regular maintenance will improve the performance and extend the life of the RoboVac. A handy cleaning tool is included to help remove hair and other debris from the vacuum cleaner's brushes. The dust collector should be cleaned after each use. The rolling brush should be cleaned once a week. The side brushes, brush guard, sensors, charging pins, and swivel wheel should all be cleaned once every month.