About the Pangea Audio DS400
Heavy-duty speaker stands
Pangea's all-steel DS400 speaker stands are designed to provide rock-solid support for a wide variety of bookshelf speakers. They range in height from 20" to 32", so you can place your speakers at the best height for your listening environment. Spikes are included for extra stability on carpet, and soft top pads help isolate the speaker from unwanted vibrations. All four rectangular pillars in each stand are hollow, so you can add sand or shot for ballast.
- heavy-duty all-steel construction with four rectangular pillars
- stand height: 28"
- weight capacity: 120 lbs. each
- 6" x 8-1/2" top plate
- base plate measures 10" x 12"
- all four hollow support columns can be filled with sand or shot
- soft top pads supplied for speaker isolation
- floor spikes to help minimize vibrations
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # PGDS400 28
What's in the box:
Pangea Audio DS400 owner's manual
- 2 Top plates
- 2 Bases
- 8 Upright posts
- 8 Spike feet (hex-nuts attached)
- 8 Rubber pads
- Eight M6x18mm screws
- Sixteen M8x25mm screws
- 2 "Pangea" logo badges
- Assembly Instructions
Pangea Audio DS400 reviews
Thanks for submitting your review
This review was collected as part of a promotion
More details on the Pangea Audio DS400
Features & specs
|Number of Stands Included||2|
|Base Dimensions||9.9375 x 12|
|Top Plate Dimensions||6 x 8.5|
DS400 Speaker Stands: The Pangea Audio DS400 speaker stand uses a steel top-plate, ultra-strong support columns, and a heavy-duty base to provide an incredibly solid and rigid platform for compact monitors and other bookshelf-type speakers. The DS400 speaker stand can support up to 120 lbs and is available in three heights - 24" (25.25" w/ spikes), 28" (29.25" w/ spikes), or 32" (33.25" w/ spikes).
Note: The DS400 speaker stands are priced and sold as pairs.
Sonic Benefits: The design, engineering, and construction of the Pangea Audio DS400 speaker stands deliver sonic benefits for your speakers - including improved image focus, low mid-range coloration, and optimal bass performance.
Steel Top-Plate: The DS400 speaker stand's steel top plate weighs 1.2 lbs and measures 6" wide x 8.5" deep. Four soft rubberized top pads are supplied for speaker isolation.
Steel Columns: Pangea Audio's DS400 speaker stand features four rectangular steel columns, forming an amazingly strong rectangular support structure for improved speaker performance. Additionally, all four columns can be filled with sand or steel shot for even better vibration damping.
Heavy-Duty Steel Base: The DS400 speaker stand has a heavy-duty steel base weighs 5.3 lbs and and is 0.125" (4mm) thick. It measures 9.9375" wide x 12" deep. Heavy-duty, large-diameter solid metal bolts rigidly couple the support columns to the base for a solid and rigid platform.
Spike Feet: The DS400 speaker stand comes with adjustable carpet-piercing steel spikes that install to the welded channels on the bottom of the heavy-duty base. These steel spikes help to isolate the stand and your speaker from the floor, absorbing vibration energy and preventing uwanted coloration of sound.
Note: The spike feet can damage hardwood, laminate, tile, vinyl and other hard surface flooring. No rubber feet or protective discs are included with these stands.
6 questions already asked
These are my first bookshelf speaker stands. I've always had floorstanding speakers previously. These were easy to assemble and look good. I did not fill the stands with anything and can't hear any ill effects. I used these stands with Kef Q350s and also used blu tack to keep them secure.
Kirpaul from San Antonio, TX