Name: Pangea Audio LS300
Brand: Pangea Audio
SKU: 325LS30020
Price: 149.95 USD
Availability: InStock
Rating: 4.5 (113 reviews)

Overview

by Crutchfield's

Rugged, versatile speaker stands

Pangea's all-steel LS300 speaker stands are designed to work with a wide variety of bookshelf speakers. They range in height from 20" to 36", so you can place your speakers at the best height for your listening environment. We recommend positioning your speakers' tweeters at approximately the same height as your ears when you're seated in your favorite listening spot.

KEEP READING

Rugged, versatile speaker stands

Spikes are included for extra stability on carpet, and soft top pads help isolate the speaker from unwanted vibrations. Two hollow columns can be filled with sand or shot for ballast, and the third features holes near the top and bottom for neatly routing speaker wire.

READ LESS

Product highlights:

all-steel construction
stand height: 20"
6" x 9" top plate
base plate measures 9-3/4" x 12"
two columns can be filled with sand or shot
third column features holes for cable management
soft top pads supplied for speaker isolation
floor spikes to help minimize vibrations
warranty: 1 year
Our 60-day money-back guarantee
MFR # PGLS300 20

What's in the box:

Pangea Audio LS300 owner's manual

2 Top-plates
2 Bases
6 Upright posts
8 Spike feet (hex-nuts attached)
8 Rubbr pads
Six M6x18mm screws
Six M8x25mm screws
Hex-key
2 "Pangea" logo badges
Assembly Instructions

Featured review

Great value. I put mine on a wood floor, lucky I bought pads for the spikes. As delivered the LS300 only has spikes. Good looking stands with the option to run your cables up one of the uprights. Solid, with nice heavy weight metals.

Kenneth from Estes Park, CO

See all 113 reviews

Customer Q&A

Hi will this work with a set of denton 85 th?

Yes those Pangea stands would be a great match with the Wharfedale Denton 85 speakers.

Reviews

Loading reviews...

Pangea Audio LS300 reviews

Average review:

113 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

Customer photos

Customer provided image, click to load a larger version.

Verified customer

Verified employee review

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Have questions for

Crutchfield response

Helpful?

Yes

<< >>

Details

Researched by Crutchfield's Russ B.

Features & specs


Number of Stands Included	2
Stand Type	Floor
Compatibility	Universal
Height	21.25
Weight Capacity	48
Base Dimensions	9.75 x 12.0
Top Plate Dimensions	6.0 x 9.0
Materials	Steel
Adjustable	No
Wire Management	Yes
Fillable	No

Product Research

Features

LS300 Speaker Stands: The Pangea Audio LS300 is a high-quality steel speaker stand that not only positions your loudspeaker drivers at the best acoustic height, but it also rigidly holds the speaker for optimal bass performance. This well-designed, all-steel stand solidly supports your monitor or bookshelf speaker improving image focus, reducing mid-range coloration, and tightening the bass performance.

The LS300 speaker stand can support up to 48 lbs and is available in five heights - 20" (21.25" w/ spikes), 24" (25.25" w/ spikes), 28" (29.25" w/ spikes), 32" (33.25" w/ spikes) or 36" (37.25" w/ spikes).
The Pangea Audio LS300 speaker stands are priced and sold as pairs.

All-Steel Triangular Design: The Pangea Audio LS300 speaker stand boasts an all-steel design with extra heavy-duty hardware to improve your speaker's bass performance. The LS300 stand features three large-diameter steel support columns coupled to steel plates at the top and bottom to form a rigid triangular shape that offers an incredibly strong platform for improved speaker performance.

Steel Top-Plate: The steel top-plate measures 6" wide x 9" deep and fits a variety of compact monitor and bookshelf-style speakers. Four soft rubberized top pads are supplied for speaker isolation.
Steel Columns: The three steel columns, approximately 1.6" in diameter, form a very rigid triangular shape for extra stability. Oversized solid metal bolts rigidly couple the support columns to the base and top-plate. Two of the columns can be filled with sand or steel shot for even better vibration damping.
Steel Base: The steel base measures 9.75" wide x 12" deep, and provides a solid and rigid platform for the stand and your speaker.

Spike Feet: The LS300 speaker stand comes with adjustable carpet-piercing steel spikes that install to the welded channels on the bottom of the heavy-duty base. These steel spikes help to isolate the stand and your speaker from the floor, absorbing vibration energy and preventing uwanted coloration of sound.

Note: The spike feet can damage hardwood, laminate, tile, vinyl and other hard surface flooring. No rubber feet or protective discs are included with these stands.

Wire Management: One of the Pangea Audio LS300 stand's support columns has openings at the top and the bottom for hiding and organizing your speaker wires.

Accessories

Loading accessories...

Q&A

17 questions already asked

Hi will this work with a set of denton 85 th?

[ Daniel Dec 14, 2022 ]

1 answer

Yes those Pangea stands would be a great match with the Wharfedale Denton 85 speakers.

[ ARIELLE H Dec 14, 2022 ] Staff

Can an Isoacoustics Gaia be installed to the bottom plate and does it need an adapter not included in the Gaia kit?

[ HIRAM MARQUEZ Apr 14, 2022 ]

1 answer

these are great stands, i just looked and measured the threads with a caliper for you, these are 8mm

[ DAVID Apr 16, 2022 ]

Will these support a pair of older Polk Monitor Series 5jr? The speakers are 9" x 9" and weigh approximately 20 lbs each?

[ CARL Apr 19, 2023 ]

1 answer

Greetings Carl, and thank you for your question. The top plate is 6x6 so your good there. Each stand supports up to 48 pounds, so you should have no issues with the older Polk speakers.

[ THOMAS Apr 19, 2023 ] Staff

What size speaker spikes 1/4 20 ?

[ Ken Mar 28, 2022 ]

1 answer

Hi Ken, I'm currently not using the spikes but I'd say 1/4 20 is a good guess.

[ BOB Mar 28, 2022 ]

Will these stands fit a pair of q acoustics 3020i speakers?

[ More Jan 08, 2021 ]

4 answers

yes it should but any stands in 28 inch will be better.

[ CHENG Jan 08, 2021 ]

Yes, I have SVS Prime Bookshelf speakers which are similar in size to your Q Acoustics 3020i speakers but the SVS speakers are heavier and they fit nice.

[ REGGIE Jan 08, 2021 ]

Absolutely! I have my Klipsch Reference Premiere RP-500M (a bit larger than those Q Acoustics) as rears on the original top mount plates. I also have the larger top plates, but only needed the original (smaller) top plates. I filled 2 tubes (each stand) with sand to add some base weight. Very stable/sturdy stands and should should work great for your speakers!

[ DARRON Jan 08, 2021 ]

I don't know. What I can tell you is that I purchased them for use with a pair of KEF LS50 speakers. I was going to purchase the larger plate but they were out of them so all I got was the pair of stands. However, when they arrived I realized that I didn't need the larger plates. I guess you could look up the measurements of the LS50s and see how they compare to your speakers. Lastly, I have to say that I quite like them. They seem to work well.

[ CHRISTOPHER Jan 08, 2021 ]

What kind of rubber feet does this stand need? I have hardwood floors to protect? Can you remove the spikes to install the feet or do the feet fit over the spikes?

[ DEREK Apr 03, 2023 ]

1 answer

Pangea offers saucers that sit under the spikes to protect your hardwood floors. Here's a link to the saucers: www.crutchfield.com/p_325SONICK/item.html

[ ZACHARY Apr 03, 2023 ] Staff

The top plate looks small for the Klipsch RP-600 M II. Can it still work? What stand is best for this speaker?

[ ALEXANDER Jan 02, 2023 ]

1 answer

Greetings Alexander, and thank you for your question. The Pangea LS300s are a recommended stand for the Klipsch RP600m. Most cases the top plate is going to be smaller than the speaker. This plate is 6x6, and the included rubber pads help keep the speaker from sliding off the stand.

[ THOMAS Jan 02, 2023 ] Staff

Will these fit with Buchardt S400 MkII speakers? The dimensions are 7" by 11".

[ Deniz Dec 18, 2022 ]

1 answer

This should do nicely with the 6"x6" top plate that is included. A bit of overhang for the speaker is normal. However, a more stable solution would be to purchase the optional set of LS300 top plates that measure 6"x9". Here's a link to that item: www.crutchfield.com/p_325PGLSTP/item.html

[ ZACHARY Dec 18, 2022 ] Staff

Will these fit the new Klipsch Reference Premiere RP-600M speakers?

[ TONY May 27, 2022 ]

1 answer

These stands will work with this speakers, no problem!!

[ Thomas May 27, 2022 ] Staff

Hi! Would these work well for a pair of Definitive Technology PowerMonitor 700s, or should I should go bigger with the DS400s? They're deeper than they are wide (about 6 3/4' wide and about 12" deep), and weigh over 30 lbs each. Thanks!

[ THOMAS Jun 10, 2021 ]

4 answers

Either of the Pangea speaker stands will handle the weight of your monitors. It's the top plate that is cause for my concern. The largest top plate available for the Pangea stands, whether they are the 300's ot 400's, is 6" x 9" which means it will not be a full platform for your monitors. I have this situation myself and it's reallyy not a big deal. I'm inclined to recommend that you go with the 400's for greater stability even though they do look a little bulky. I'm very pleased with my Pangea 300's but I had to specify the 6"x 9" top plate for the 28 inch height.

[ MICHAEL Jun 10, 2021 ]

Those dimensions feel like you would want the bigger one.

[ MIKE Jun 10, 2021 ]

Hello, Thomas. The LS300s are very well built and should be sturdy enough for your heavier speakers, especially if you fill the posts with sand or shot (I haven't done that yet, but might when I figure out where their permanent home will be). The optional larger top plates are a good idea, though. At $24.95, the extra depth (6x9 vs the standard 6x6) will fit your speakers better and you're still under the cost of the 4-pillar DS400s. Those plates didn't come with the little pads, as I recall, so either reserve the ones that come with the 6x6s or get yourself something else like blue tack or whatever). I thought the 3-post LS looks a little nicer and lighter with a skinny speaker like yours (I bought them for my ELAC B5.2s), but the beefier DS does have its own appeal, too. Good luck and good listening! John W.

[ JOHN Jun 10, 2021 ]

Yes, but you probably need to buy the optional top plate set 6 x 9. They worked perfect for my Polk S20's bookshelf speakers. I bought the 28" tall which fits perfect at ear level when I sit on my sofa. They are sturdy, well constructed and look great. Thank you Crutchfield.! I am a happy customer enjoying Hi Res audio.??

[ JORGE DE Jun 10, 2021 ]

Will the Martin Logan 35xti be too big for these?

[ MICHAEL May 22, 2021 ]

2 answers

Yes, your speakers will be just a little bit bigger than the stands. But these speakers stands are of high quality and are very solid! I have a pair of Klipsch's RP 600m. On these for the last 3 years and my dimensions are even a little bigger then your Martin Logan. You have a little over hang on both ends but not much! Again these are very well maid! These will work for your Martin Logan 35xti!!

[ CHUCK May 23, 2021 ]

Hi, I am using these with Kef Q350 speakers, which are 8-5/16"W x 14-1/4"H x 12-1/16"D. They weigh 16.8 lbs. The Pangea stands are very sturdy.

[ MICHAEL May 22, 2021 ]

Do these fit Klipsch R15PM?

[ Connor Jan 22, 2023 ]

1 answer

Greetings Connor, and thank you for your question. The Pangea LS300 stands are a recommended stand for the Klipsch R15 PM speakers. The speakers will just sit on top of the plate, not physically attach.

[ THOMAS Jan 22, 2023 ] Staff

Do these speaker stands go with Polk Audio Signature Elite ES15 Speakers?

[ BERND Nov 17, 2022 ]

1 answer

They do, Bernd! We pair the fantastic Pangea Audio LS300 in 24" and 28", but you can use the 32" tall version if that best fits your setup!

[ Bo Nov 18, 2022 ] Staff

Do these speakers stand work with Polk signature Elite ES15 speakers?

[ BERND Nov 17, 2022 ]

1 answer

They do, Bernd! We pair the fantastic Pangea Audio LS300 in 24" and 28", but you can use the 36" tall version if that best fits your setup! Do make sure to have them on firm footing, the taller the speaker stand of course the more important a solid setup is!

[ Bo Nov 18, 2022 ] Staff

I have a pair of Audioengine HD6 speakers. Will they work? I sit in a love seat, what would be the proper height of the stans for me?

[ LORRAINE Jul 03, 2022 ]

1 answer

We do recommend these Pangea Audio LS300 for use with the fantastic Audioengine HD6 speakers, no problem. These particular 36" height models are the tallest available in the LS300 line, so if you are in a loveseat, getting the speakers level with your ears and above any armrest or sofa back is a great move! Dialing in the exact speaker height for your personal setup is tough on my end, but the HD6 tweeter would be at about 46" from the floor with these models. It never hurts to pull out the old tape measure before ordering, but I think these 36" models should be a great fit for most applications.

[ Bo Jul 03, 2022 ] Staff

Can spikes be removed for use on hard floor?

[ DOUGLAS Feb 18, 2022 ]

3 answers

Hi, Yes, they certainly can be removed.

[ DEVON Feb 24, 2022 ]

Yes

[ PAUL Feb 19, 2022 ]

The stands come with spikes but they are not installed, so yes you can put them on hard floors.

[ REGGIE Feb 18, 2022 ]

I have a pair of ancient Criterion 8 inch 2 way, 21"h, 12"w, 11"d, 20lbs Will these work?.

[ Brett Jul 07, 2021 ]

2 answers

The stands' platform that you place the speakers on is pretty small, but they'll work. Just use some blu-tack to secure the speakers and bear in mind you cannot fill the stands with sand despite what Pangea says.

[ THOMAS Jul 07, 2021 ]

If you don't mind them hanging over a bit. My speakers measures 8"w x 15 3/4"h x 11 7/8"d They hang over a bit but are very sturdy I have been using them for over a year now with no problems! I have checked out other stands but these matched for the proper height. And where the best bang for your buck and well made! Again they are very solid and if you don't mind your speakers hanging over a bit. Then yes! Hope this helps.

[ CHUCK Jul 07, 2021 ]

SHOW MORESHOW LESS