About the SSV Works GN-3A
Custom audio for your Polaris General
Custom audio for your Polaris General
Your Polaris General is an exceptional off-road vehicle, so why settle for ordinary sound? The SSV Works GN-3A audio kit includes the two-piece MRB3 digital media receiver, kick-panel speaker pods with great-sounding SSV Works WP-A6 6-3/4” speakers, a compact 4-channel amplifier, and a 300-watt powered subwoofer. Installation is amazingly easy and your tunes will sound terrific.
Hideaway receiver and rugged controller
You can do a lot with the MRB3 digital media receiver combo. Connect to Bluetooth, listen to AM/FM radio stations, or plug a device into the optional AUX input. The built-in 2-ohm stable amp built into the hideaway receiver can send up to 200 watts peak power to as many as 8 speakers. There's a set of RCA preamp outputs for sending signal to the powered subwoofer.
The outdoor-ready controller's bright white LED display is easy to read in all kind of conditions, and backlit, rubber-coated buttons are big enough to be used when you're wearing gloves. It comes with a weather-resistant mounting bracket that attaches securely in the center of the handlebars. The receiver unit mounts in the storage bin and still leaves plenty of room for your gear.
Your side-by-side is made to perform off-road and so are these weather-resistant 6-3/4" speakers. The grille-mounted 1" titanium tweeters create brilliant highs that you can hear over the roar of the engine, while the durable poly cones handle everything else with depth and clarity. SSV Works' unique positive lock connectors keep the speaker wires secure, even when you're really tearing up the trail.
The speakers are mounted in sturdy, custom-designed kick panel pods that bolt right onto your General. The “plug and play” wiring harness makes it easy to set up your system.
Compact, powerful amp
To give those speakers the power they need to really rock, there's the WP-A360S4 amplifier. Compact, weatherproof, and built for off-roading, this 4-channel amp offers 50 watts per channel at 4 ohms (90 watts x 4 at 2 ohms) and has a selectable high-pass filter. It's pre-tuned to work beautifully with the SSV Works receiver and speakers. The installation kit is designed specifically for your General.
A stowaway sub
The 10” SSV Works powered subwoofer fits neatly into your General and adds plenty of thump to your tunes. Powered by a compact Class D amp, this 300-watt sub is weather-resistant and built to stand up to high-speed blasts on the trail or in the dunes.
Customize your speakers
The standard gray grilles look pretty cool, but if you want a little more color, you have options. The standard grilles are paintable, so you can mix up a batch and get a full-custom look. SSV Works also offers great-looking optional grilles, which are available in four colors.
About SSV Works
The people at SSV Works know what your audio gear has to put up with, because they're off-road enthusiasts, too. They build radios and speakers for many of the top names in powersports, and their gear has earned a reputation for standing up to the dust, water, mud, and vibration that destroys lesser gear.
Bluetooth note: Use of this receiver's Bluetooth features will depend upon your phone's Bluetooth capabilities. Learn more in our article explaining Bluetooth profiles.
This marine digital media receiver will not play CDs.
- package includes MRB3 digital media receiver, two WP-A6 speakers, WP-A360S4 amplifier, 10" powered subwoofer
- dash kit, custom-fit speaker pods and sub enclosure, mounting brackets and hardware
- designed for easy, plug-and-play installation on your Polaris General
MRB3 digital media receiver specs:
- marine/powersports digital media receiver (no CD player)
- hideaway module includes AM/FM tuner and amplifier
- power specs: 200 total watts peak — 25 watts RMS (50 peak) x 4 channels
- built-in Bluetooth music streaming
- glove-friendly buttons
- 6 EQ presets
- weatherproof wiring harness
- highly legible LED display (black on white)
- inputs: 3.5 mm AUX input; USB input
- outputs: 2-channel 4-volt preamp outputs
- warranty: 1 year
WP-A6 6-3/4" speaker specs:
- 6-3/4" speakers made for off-roading (pair)
- 1" titanium tweeter mounted on grille
- weather-resistant poly woofer
- Santoprene rubber surround
- paintable speaker grilles
- positive lock connectors keep speaker wires secure
- impedance: 4 ohms
- power handling: up to 60 watts RMS (120 watts peak)
- warranty: limited lifetime
- weatherproof Class D 4-channel amplifier
- pre-tuned for SSV Works sources
- output: 50 watts x 4 at 4 ohms (90 watts x 2 at 2 ohms)
- selectable high-pass filter (60/100/120 Hz)
- dimensions: 7.32" L x 3.55" W x 2.12" H
- warranty: 1 year
SSV-10M 10" powered subwoofer
- built-in Class D amplifier
- output: up to 300 watts
- polypropylene cone
- rubber molded gasket
- stitched Butyl rubber surround
- rugged fiberglass enclosure
- warranty: limited lifetime
- Our 60-day money-back guarantee
- MFR # 81517201259
What's in the box:
- Digital Media Receiver & Amplifier Kit:
- Hide-away source unit
- Wired controller (attached 5' cable)
- 4-Channel amplifier
- Custom mounting bracket
- 8' Power & Ground cables (for amp)
- 29" Power/ground harness (for receiver)
- 39" USB/Aux extension cable
- 58" Proprietary front speaker cable
- 9' Proprietary rear speaker cable
- 3' Stereo minijack cable
- 57" Wire antenna
- 14" Battery terminal cable (terminated by a ring-terminal on each end)
- Fuse holder
- 40A fuse
- Quick-slide connector
- Ground screw
- 2 Wired controller screws
- 4 Amplifier screws
- 4 Hide-away module screws
- 10 Large wire-ties
- 2 Small wire-ties
- User Guide
- Amplifier Installation Instructions
- Dash Kit Instructions
- Front Kick-Pod Speakers:
- 2 Kick-pod speakers
- 6 Screws
- 6 Washers
- Mounting Diagram
- Underdash Amplified Sub Enclosure:
- Amplified subwoofer enclosure (attached 10' power and ground wires)
- 15" Battery terminal cable (inline fuse holder and 40A fuse)
- 3' Proprietary speaker cable
- Mounting plate
- 8 Hex-head screws
- 2 Torx-head screws
- 2 Hex-nuts
- 4 Small washers
- 6 Medium washers
- 3 Large washers
- 5 Wire-ties
- Heat-shrink tubing
- Rubber sleeve
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Thanks for submitting your review
More details on the SSV Works GN-3A
Polaris General SSV Works 3 Speaker Audio Kit: The SSV GN-3A is a 3 speaker audio kit for select Polaris General ATVs. The SSV GN-3A includes a digital media receiver (MRB3) which consists of a hide-away source module and wired controller, a 4-channel amplifier (WP-A360S4), a pair of front kick-pod speakers (GN-F65), and an under-dash amplified subwoofer enclosure (WP-GNUDS10).
Vehicle Compatibility: The SSV GN-3A is designed specifically for 2016-2018 Polaris General ATVs (2 or 4 seat models).
Direct Fit Installation: All necessary mounting hardware and wiring are included for installation.
- Mounting Bracket Plate: The system's hide-away source unit and 4-channel amplifier comes pre-installed to a mounting bracket plate which installs under the center dash.
- Dash Kit: A dash kit is included with the wired controller for a factory look, feel, and fit in the dash. The dash kit replaces the factory dash pocket.
- Plug-&-Play Harnesses: The included harnesses provide plug-&-play connections between the receiver, amplifier, speakers and subwoofer (hardwire connections will need to be made at the battery and for ground).
Weather Resistant Design: All components of SSV GN-3A system are rugged, durable, and weather resistant.
SSV Works MRB3: The SSV Works digital media receiver (MRB3) consists of two components - a hide-away source unit and a wired controller.
- Hide-Away Source Unit: The hide-away source unit features a built-in amplifier and AM/FM tuner, along with USB charging ports, an Aux input, and support for Bluetooth audio streaming.
- Wired Controller: The wired controller features a an attached 5' cable which connects to the hide-away source unit. The wired controller features a large hyper-white LED backlit display designed to be visible in all conditions while controlling volume, track, and play/pause functions with glove friendly, backlit rubber-coated buttons.
Bluetooth Audio Streaming: Wireless stream music from your Bluetooth source device to the MRB3 with basic playback control (Play/Pause & Previous/Next Track). It does not support song/artist display or phone calls.
Aux In/USB Charging Ports: The SSV Works digital media receiver (MRB3) provides a 3.5mm auxiliary input for audio playback and a two USB (type-A) ports for charging.
- Panel Mount Aux Input/USB Charging Port: A panel-mount input port provides a
3.5mm Aux input for audio playback from a portable audio device and a USB
(type-A) charging port rated at 5V/2.1A to charge your smartphone or tablet
device. The panel-mount input port features an attached 39" cable and requires a
separate power and ground connection. The panel-mount input port requires a
circular cutout in your dash and the supplied threaded collar secures it in
place from behind the cutout opening.
- Cutout Dimensions: 1.0" (diameter) x 2.0" (depth)
- Outer Dimensions: 1.75" (diameter) x 0.5" (depth)
- USB Charging Port: There is also a second USB (type-A) charging port attached to the hide-way source unit by a 7" cable that is rated a 5V/1A that can be used to charge a smartphone or smaller electronic USB-enabled devices.
Note: The USB charging ports do not support audio playback.
AM/FM Tuner: The unit offers a built-in AM/FM tuning with manual and seek tuning. There are no presets. The unit comes with a 57" wired AM/FM antenna.
4-Channel Amplifier + 4V RCA Output: The SSV Works digital media receiver (MRB3) is equipped with a 20 watt x 4 channel amplifier that is stable down to 2 ohm and capable of powering up to eight 4 ohm speakers. A 4-volt RCA output lets you connect an external amplifier or powered subwoofer. The 4-volt RCA output is full-range with no low or high pass filter.
Audio Settings: You can select from seven EQ presets (Flat, Classical, Pop, Rock, Jazz, Metal, or Off). In Off mode, you can manually adjust Bass & Treble. It also offers a Loudness function, as well as balance & fade controls.
4-Channel Amplifier: The included 4-channel (WP-A360S4) amp utilizes Class D amplifier technology for highly efficient clear and powerful sound. The amplifier is 4 and 2 ohm rated.
- 50 watt x 4 channel into 4 ohm
- 90 watt x 4 channel into 2 ohm
Gain Level: The WP-A360S4 amplifier is pre-tuned (gain level set) for the included SSV Works MRB3, which provides the best output levels with no distortion
Selectable High-Pass Filter: The amplifier's high pass crossover should be set to 120Hz for the included SVS Works front kick-pod speakers, allowing the speakers to play at optimum volume level with no distortion and blend in seamlessly with the system's amplified subwoofer enclosure.
Protection Circuitry: The SVS Works 4-channel amplifier features Overheating, Short Circuit, and Low Voltage protection. A Blue LED indicate the amplifier is powered up and working properly, while a Red LED indicates the amplifier is in Protect mode due to the following irregularities.
- Overheating: Improper impedance or not enough ventilation.
- Short Circuit: Speaker wires are making contact with each other.
- Low Voltage: Amplifier needs 10-16 volts in order to operate.
Kick-Pod Speakers: The SSV Works custom-molded kick-pods (GN-F65) house 6.5" coaxial speakers and bolt into the upper foot well away from your feet on your compatible ATV or UTV. Theses 6.5" kick-pod speakers are 4 ohm rated and can handle 60 watts (RMS)/120 watts (Peak) power.
- Marine-Grade 6.5" Coaxial: Engineered specifically for Powersports, the 6.5" coaxial speakers (WP-A6) bring audiophile grade components and sound to the outdoors. A 1" tweeter creates crisp brilliant highs engineered to be heard outdoors, over the motor, and inside a helmet. The grille mounted tweeter allows for peak cone travel creating maximum output while providing a low profile with optimal weatherproofing. The polypropylene cone woofer and Santoprene surround provide exceptional volume and clarity in the harshest environments. The kick-pod speaker even go a step further with an EPDM duo lock gasket surrounding the speaker to keep the water out and the sound pressure in. EPDM conforms to the surface and seals tight no matter where you ride, in direct UV, extreme heat, or in freezing temps.
- 100% Fiberglass Enclosures: The kick-pod enclosures are 100% fiberglass for the best sound quality and bass response. They are finished in a black texture coat to match Polaris textures and can be custom painted to match your color scheme. The kick-pod speakers come with stainless mounting hardware and step-by-step installation instructions.
- Customizable Grilles: The kick-pod speakers feature acoustically transparent mesh grilles with interchangeable color inserts (sold separately) to add the ultimate in customization to your recreational vehicle. The inserts are easily swappable allowing you to custom-match the speakers to the rest of your ride. Choose from Red, White, Blue, or Orange (sold in pairs).
10" Under-Dash Amplified Sub Enclosure: The SSV Works custom molded sub enclosure (WP-GNUDS10) features a SVS Works marine-grade 10" subwoofer and a 300W RMS/600W Peak built-in amplifier that easily installs under the dash. The 10" woofer features a polypropylene cone and rubber sound. The built-in amplifier is pre-tuned for the loaded 10" woofer. They enclosure is 100% fiberglass for the best sound quality and bass response. It is finished in a black texture coat to match Polaris textures and can be custom painted to match your color scheme. It also includes stainless mounting hardware and step-by-step installation instructions. There is no cutting required; the box simply bolts under the dash and provides a pre-installed pass-through subwoofer wire to connect to the SSV Works MRB3 (the amplified sub enclosure does require a hardwire power and ground connection).
Optional Cage Mount Speaker Pods (sold separately): SSV Works custom molded Cage Mount Speaker Pods (sold separately - see Accessories Tab) can be used when you need more sound on your ATV or UTV. Unlike wakeboard towers, these mini-pods are designed to provide sound to the passengers without blocking visibility. They are 100% fiberglass for the best sound quality and bass response. They are finished in a black texture coat to match factory interior textures and can be custom painted to match your color scheme. These mini speaker pods include a versatile clamping system and stainless mounting hardware.