SSV Works 170-GN-F65U

Features

Unloaded Front Kick-Pod Enclosures: The SSV Works GN-F65 consists of two unloaded front kick-pod enclosures which mount under the front kick-panels of a 2016-2018 Polaris General ATV (2 or 4 seat model). The GN-F65 kick-pod enclosures fit the SSV Works WP-A6 powersports speakers and other similar sized marine-grade speakers (all sold separately).

100% Fiberglass Construction: The kick-pod enclosures are 100% fiberglass for the best sound quality and bass response. They are finished in a black texture coat to match Polaris textures and can be custom painted to match your color scheme.

Bolt-In Installation: These kick-pod speaker enclosures bolt into the upper foot well away from your feet on your compatible ATV or UTV. The kick-pod enclosures come with stainless mounting hardware and step-by-step installation instructions. Drilling into the vehicle is required.

Cutout Dimensions: In addition to fitting the SSV Works WP-A6 powersports speakers, the GN-F65 kick-pod enclosures will fit similar size speakers (all sold separately) based on the following cut-out dimensions of the enclosures.

• Round Cutout: 5.625"
• Mounting Depth: 6.375"
• Flange & Grille Clearance Around Cutout: 0.9375"
• 4 Hole Bolt Pattern: 4.3125" (horizontally & vertically), 6.125" (diagonally)

Note: If you are using speakers other than the WP-A6, you may have to drill new screw holes.

Attached Speaker Wire: Outside of each enclosure is an attached 9" speaker wire terminated by a proprietary connector that directly plugs into SSV Works sound system components. If the enclosure will not be plugged into an SSV Works component, you can cut off the proprietary terminal to reveal bare positive (red) and negative (black) wires. Inside each enclosure is a positive and negative speaker wire terminated by female quick-slide connectors (positive = 0.255", negative = 0.215").