About the SSV Works 170-GN-UD10U
Add a 10" sub to your Polaris General
Add a 10" sub to your Polaris General
Want to really boost the bass in your Polaris General? This custom-molded subwoofer enclosure from SSV Works installs easily under the dash and holds the 10” subwoofer of your choice. Bolt-in installation means no cutting and no hassles, so it's an easy DIY project that'll pay big benefits.
Made from rugged, durable fiberglass, the enclosure is finished in a black, textured coating that blends right into your General's cockpit. It's paintable, too, so you can create your own custom look. A weatherproof pass-through sub wire is included, along with stainless-steel mounting hardware and step-by-step installation instructions.
- unloaded 10" subwoofer box
- fits 2-seat and 4-seat Polaris General models
- designed to fit under the dash
- easy, bolt-in installation
- black textured finish matches the Generals' stock interior
- made from durable, paintable fiberglass
- durable pass-through subwoofer wire included
- stainless-steel mounting hardware
- assembled in the USA
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 815172012535
What's in the box:
- Unloaded subwoofer enclosure
- Mounting plate
- 41" Speaker wire
- 12 Hex-head bolts
- 2 Torx-head bolts
- 2 Hex-head nuts
- 3 Large washers
- 4 Small washers
- 9 Medium washers
- 8 Screws
- Installation Instructions
- Harness Plate Installation Instructions
SSV Works 170-GN-UD10U reviews
Installing wasn't too bad. The templates used for drilling holes in the firewall aren't exact, but it's real close. I mounted a MTX 10" Marine sub in it without having to do any cutting. I'll admit, I was surprised at how great this setup sounds. Very pleased.
0 of 0 found this helpful
More details on the SSV Works 170-GN-UD10U
Under-Dash Unloaded Subwoofer Enclosure: The SSV Works GN-UD10U is a custom-molded unloaded sub enclosure designed for a 10" subwoofer (such as the SSV Works 10M) and easily installs under the dash of a 2016-2018 Polaris General ATV (2 or 4 seat model).
Note: The unloaded subwoofer enclosure will require a compatible 10" woofer and an external amplifier (both sold separately).
100% Fiberglass Construction: The unloaded subwoofer enclosure (GN-UD10U) is constructed of 100% fiberglass for the best sound quality and bass response. It is finished in a black texture coat to match Polaris textures and can be custom painted to match your color scheme.
Bolt-In Installation: The unloaded subwoofer enclosure bolts under the dash of your compatible ATV or UTV. The GN-UD10U comes with stainless mounting hardware and step-by-step installation instructions. Drilling into the vehicle is required.
Cutout Dimensions: In addition to fitting the SSV Works 10M marine-graded subwoofer the GN-UD10U will fit similar sized 10" woofers (sold separately) based on the following cut-out dimensions of the under-dash subwoofer enclosure.
- Round Cutout: 9.0625"
- Mounting Depth: 12.5"
- Flange & Grille Clearance Around Cutout: 0.8125"
- 16 Hole Bolt Pattern: 1.9375" (shortest distance), 9.625" (longest distance) - only 8 screws will be used to mount your woofer
Note: If you are using a 10" woofer other than the SSV Works 10M, you may have to drill new screw holes.
Attached Speaker Wire: The unloaded subwoofer enclosure comes with a 41" length speaker wire with an integrated mounting plate. The mounting plate installs to one side of the enclosure with four screws, leaving 31" of speaker wire inside the enclosure and 10" of speaker wire outside the enclosure. The 31" of speaker wire inside the enclosure is terminated by a bare tinned wire (positive & negative). The 10" speaker wire on the outside of the enclosure is terminated by a proprietary connector that directly plugs into SSV Works sound systems and amplifiers. If the enclosure will not be plugged into an SSV Works amplifier, you can cut off the proprietary terminal to reveal bare positive (red) and negative (black) wires.