SSV Works RKR-2K

Features
Media Center & Speakers
Mounting & Wiring

Features

Overview: The SSV Works RKR-2K is a compact audio system designed specifically for mounting on Can-Am Ryker vehicles. The RKR-2K includes an MRB3 media controller, with built-in Bluetooth for audio streaming and an AM/FM tuner. The system also includes two Kicker 4" 2-way speakers. The all-weather media center and speakers come pre-installed on a fairing-mounted bracket that bolts to the factory mounting locations. Pre-terminated wire harnesses allow for simplified "plug-and-play" installation.

Note: The SSV Works RKR-2K cannot be installed on vehicles with a windshield.

Media Center & Speakers

SSV Works MRB3: The SSV Works digital media receiver (MRB3) consists of two components - a hide-away source unit and a wired controller. Both components are weather resistant.

• Hide-Away Source Unit: The hide-away source unit features a built-in amplifier and AM/FM tuner, along with support for Bluetooth audio streaming.
• Wired Controller: The wired controller features a an attached 5' cable which connects to the hide-away source unit. The wired controller features a large hyper-white LED backlit display designed to be visible in all conditions while controlling Volume, Track Up/Down, Mode, and Play/Pause functions with glove friendly, rubber-coated buttons.

4-Channel Amplifier: The SSV Works digital media receiver (MRB3) is equipped with a 20 watt x 4 channel amplifier that is stable down to 2 ohm and capable of powering up to eight 4 ohm speakers.

Bluetooth Audio Streaming: You can wirelessly stream music from your Bluetooth source device to the MRB3 with basic playback control (Play/Pause & Previous/Next Track). It does not support song/artist display or phone calls.

  AM/FM Tuner: The unit offers a built-in AM/FM tuning with manual and seek tuning. There are no presets. The hide-away unit features a standard Motorola jack for connecting the included wire antenna that's integrated into the Media Center cabling.

USB Charging Port: A USB charging port is included on a 6" pigtail attached to the rear of the hide-away module, providing 5V/1A of output. Audio playback is not supported by the USB port.

Optional Line-In: The hide-away unit includes a Line-In harness with a proprietary plug for use with an optional SSV Works 3PUSB35A auxiliary input adapter (sold separately). This add-on piece features a USB charging port along with a 3.5mm input jack for audio playback.

Optional Line-Out & Amp Trigger: The hide-away unit includes a Line-Out harness that can provide a 4-volt RCA output when used with an optional RCA adapter (not included), letting you connect an additional external amplifier or powered subwoofer. The 4-volt RCA output is full-range with no low or high pass filter. The Line-Out harness also includes a 12V turn-on wire for activating an outboard amp. 

Audio Settings: You can select from seven EQ presets (Flat, Classical, Pop, Rock, Jazz, Metal, or Off). In Off mode, you can manually adjust Bass & Treble. It also offers a Loudness function, as well as balance & fade controls.

Kicker Speakers: The SSV Works RKR-2K includes two 4" 2-way speakers that are designed for all-weather use. Each speaker is pre-installed in a heavy-duty injection-molded enclosure that includes durable spoke-style speaker grilles.

Mounting & Wiring

Mounting: The SSV Works MRB3 and the included Kicker speakers all come pre-mounted to a steel bracket that attaches to the vehicle front fairing using the factory mounting locations. The hide-away module is pre-attached to a mounting plate that installs onto the factory storage compartment, keeping the hide-away unit hidden from sight. A round cut-out in the mounting plate lets you re-locate the factory USB port before mounting to the storage compartment.

Note: Drilling into the factory storage compartment will be required for mounting the RKR-2K hide-away module.

Wiring: The SSV Works MRB3 Media Controller and its accompanying hide-away module both feature pre-terminated wiring harnesses that allow them to simply plug together. Power and ground for the system is provided from the factory USB port wiring. Two slip-on connector terminated wires from the MRB3 attach to the factory USB port wires and in turn, also re-connect to the USB port. This allows the factory wiring to power both the RKR-2K system and the factory USB charging port, with no splicing into the factory wiring.