About the SSV Works 170-WP3-RZF3O4A
Big-time sound for your RZR XP4 1000
Big-time sound for your RZR XP4 1000
This overhead audio system brings big sound and bright light to your Polaris RZR XP4 1000, RZR 4 900, or XP4 TURBO. Everything's built right in, including a 2-piece digital media receiver, four SSV Works speakers, and a super-bright dome light. Designed specifically for your RZR, this rugged, weatherproof roof system attaches easily and securely to the cage, so you'll be rockin' down the trail in no time.
A rugged receiver
The SSV Works MRB3 digital media receiver combo built into the sound bar packs cool features and plenty of punch into a compact package. Connect to Bluetooth, listen to AM/FM radio stations, or plug a device into the optional AUX input. The amp that's built into the hideaway receiver will send plenty of power to the four 6-3/4” speakers. The outdoor-ready controller's bright white LED display is easy to read in all kind of conditions, and the backlit, rubber-coated buttons are big enough to be used when you're wearing gloves.
Your side-by-side is made to perform off-road and so are these weather-resistant WP-A6 6-3/4" speakers. The grille-mounted 1" titanium tweeters create brilliant highs that you can hear over the roar of the engine, while the durable poly cones handle everything else with depth and clarity. SSV Works' unique positive lock connectors keep the speaker wires secure, even when you're really tearing up the trail. The “plug and play” wiring harness makes it easy to set up your system.
Made from rugged, durable fiberglass, these custom-fit enclosures are finished in a black, textured coating that blends right into your RZR's cockpit. They're paintable, too, so you can customize these speaker pods to suit your style. Each enclosure features a waterproof connector for wiring up your speaker, along with stainless-steel mounting hardware and step-by-step installation instructions.
Customize your speakers
The standard gray grilles look pretty cool, but if you want a little more color, you have options. The standard grilles are paintable, so you can mix up a batch and get a full-custom look. SSV Works also offers great-looking optional grilles, which are available in four colors.
Even more sound
If you really want to crank it up, you can add even more speakers to your RZR with 2-speaker panels from SSV Works. There's one custom-designed panel that fits over the front seats another that fits over the rear seats.
About SSV Works
The people at SSV Works know what your audio gear has to put up with, because they're off-road enthusiasts, too. They build radios and speakers for many of the top names in powersports, and their gear has earned a reputation for standing up to the dust, water, mud, and vibration that destroys lesser gear.
Bluetooth note: Use of this receiver's Bluetooth features will depend upon your phone's Bluetooth capabilities. Learn more in our article explaining Bluetooth profiles.
iPod/smartphone note: If you're going to use your iPod or smartphone with this receiver, be sure to check "Details" for compatibility information.
- weatherproof sound bar includes MRB3 digital media receiver, 4 WP-A6 speakers, and a dome light
- designed for easy, plug-and-play installation on your Polaris RZR XP4 1000, RZR 4 900, or XP4 TURBO
- custom-fit fiberglass enclosure with all wiring and mounting hardware
- installs in 15 minutes with a simple 2-wire hook up
MRB3 digital media receiver specs:
- marine/powersports digital media receiver (no CD player)
- hideaway module includes AM/FM tuner and amplifier
- power specs: 200 total watts peak — 25 watts RMS (50 peak) x 4 channels
- built-in Bluetooth music streaming (30-foot range)
- glove-friendly buttons
- weatherproof wiring harness
- highly legible LED display (black on white)
- inputs: 3.5 mm AUX input; USB input
- outputs: 2-channel 4-volt preamp outputs
- warranty: 1 year
WP-A6 speaker specs:
- 6-3/4" speakers made for off-roading (four)
- 1" titanium tweeter mounted on grille
- weather-resistant poly woofer
- Santoprene rubber surround
- paintable speaker grilles
- positive lock connectors keep speaker wires secure
- impedance: 4 ohms
- power handling: up to 60 watts RMS (120 watts peak)
- warranty: limited lifetime
- Our 60-day money-back guarantee
- MFR # 815172011071
What's in the box:
- Overhead speaker enclosure (attached 10' wiring harness)
- 2 Mounting brackets
- Twelve M6 x 1" screws
- Twelve M6 flat-washers
- Fuse holder w/ 6" leads (10A fuse installed)
- Crimp-on ring terminal
- Five 7.5" wire-ties
- User guide
- Installation guide
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Thanks for submitting your review
More details on the SSV Works 170-WP3-RZF3O4A
Overview: The SSV Works WP3-RZF304A is a weatherproof overhead powered speaker system, designed specifically for Polaris RZR XP4 1000, RZR 4 900, and XP4 Turbo UTVs.
System: The WP3-RZF304A features four 6-3/4" full-range, waterproof, 2-way drivers mounted in a sealed fiberglass weatherproof enclosure. Installation brackets are included that allow the system to be mounted overhead between the roll-cage tubing. The built-in ultra-efficient Class-D amplifier provides 50 watts peak power to each speaker and it's low power consumption is designed around the UTV's charging system for maximum efficiency.
Sources: The overhead system includes a built-in AM/FM tuner as well as the ability to pair and steam music from a Bluetooth enabled smartphone or tablet, with over 30' of wireless range. The WP3-RZF304A also includes a wiring pigtail to plug in SSV's optional Aux-in/Charging adapter (sold separately). This provides a 3.5mm auxiliary input jack, for audio playback from a portable media player, along with a USB charging port (type-A, 2.0), which can provide 5V/2.1A for charging your smartphone, tablet, or other audio playback device. The Aux-in/Charging adapter is designed to be panel-mounted in the dash or console of the vehicle. The overhead speaker system also includes two other wiring pigtails with proprietary connectors, one for plugging in the optional speaker output harness (sold separately), allowing you to run a speaker-level signal to additional speakers such as the WP3-RZF30+2RA add-on rear speaker enclosure (not included). The other output pigtail is a 10' low-level output harness for running a low-level signal to an additional amplifier or amplified speakers (sold separately). This also requires an optional adapter (sold separately) or will have to be hardwired.
MRB3: At the center of the overhead speaker system is the MRB3 Bluetooth media control panel. This includes basic controls for operating your Bluetooth connected playback device along with an LCD display. Controls include: Track Up/Down arrows, Mode (switches input sources), Play/Pause, and Volume +/-. Pressing and holding the Mode button for 2 seconds will pull up additional tone settings such as Bass, Treble, Balance, Fader, EQ, and Loudness that can be adjusted using the Volume +/- buttons. EQ brings up 7 preset EQ settings: Off, Flat, Class, Pop, Rock, Jazz, and Metal. All buttons on the control panel are rubberized and weatherproof.
Dome Light: Along with the media control panel, the WP3-RZF304A also includes a built-in dome light, for illuminating your UTV's interior. The dome light consists of 6 hyper-white LEDs along with a rubberized weatherproof On/Off switch.
Power: The overhead sound system includes built-in 10' power and ground cables that will need to be run to the UTV's battery for powering.
1 question already asked