Contact us
Close contact box

SSV Works 170-X3-US10U

Custom-fit unloaded 10" subwoofer enclosure — fits under seats in the Can-Am Maverick X3 (high seats)

Item # 327X3US10U

Want to really boost the bass in your Can-Am Maverick X3? This custom-molded subwoofer enclosure from SSV Works...

Read more from Crutchfield writer, Jon P.

Find what Fits your car

California customers:
Please click here for your Proposition 65 warning.

Ships free

Low Stock
$299.99 each

About the SSV Works 170-X3-US10U

Add big bass to your Can-Am Maverick

Want to really boost the bass in your Can-Am Maverick X3? This custom-molded subwoofer enclosure from SSV Works installs under either the driver's or passenger's seat and holds the 10” subwoofer of your choice. The box mounts to the frame above the floor, and no brake line mods are required. Bolt-in installation means no cutting and no hassles.

Add big bass to your Can-Am Maverick

Want to really boost the bass in your Can-Am Maverick X3? This custom-molded subwoofer enclosure from SSV Works installs under either the driver's or passenger's seat and holds the 10” subwoofer of your choice. The box mounts to the frame above the floor, and no brake line mods are required. Bolt-in installation means no cutting and no hassles.

This model is designed for use with stock seats in the “high” position. If your stock seats are in the “low” position or have been replaced by aftermarket seats, check out the SSV Works 170-X3-USL10U.

Made from rugged, durable fiberglass, the enclosure is finished in a black, textured coating that matches your Maverick's cockpit. It's paintable, too, so you can customize it to suit your style. A weatherproof pass-through sub wire is included, along with stainless-steel mounting hardware and step-by-step installation instructions.

READ LESS

Product highlights:

  • unloaded 10" subwoofer box
  • fits most Can-Am Maverick X3 models with "high" seats
  • easy, bolt-in installation
  • black textured finish matches the stock interior
  • made from durable, paintable fiberglass
  • weatherproof pass-through subwoofer wire included
  • stainless-steel mounting hardware
  • assembled in the USA
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # 815172013976
KEEP READINGREAD LESS

What's in the box:

  • Unloaded subwoofer enclosure
  • 4 Brackets
  • Ten M6 x 16mm bolts
  • M6 x 25mm bolt
  • 10 Small washers
  • 2 Large washers
  • Hex nut
  • 2 Large spacers
  • Small spacer
  • 3 Foam strips
  • Installation Instructions
  • Mounting Template

Customer reviews

We don't have any reviews, yet.
Submit a review and then enter to win a $350 rewards card.
Be the first to review this product

Loading reviews...

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the SSV Works 170-X3-US10U

Product Research

Features

Vehicle Compatibility: The SSV Works X3-US10 fits 2016-2018 Maverick X3 and Maverick X3 Max (two and four seat models). It easily installs under either the driver or passenger seat. The box simply mounts to the frame above the floor with no brake-line modification required. 

Note: The unloaded subwoofer enclosure will require a compatible 10" woofer and an external amplifier (both sold separately).

Subwoofer Compatibility: In addition to fitting the SSV Works 10M marine-graded subwoofer the GN-UD10U will fit similar sized 10" woofers (sold separately) based on the following cut-out dimensions of the under-dash subwoofer enclosure.

  • Round Cutout: 9.105"
  • Mounting Depth: 5.0"
  • Flange & Grille Clearance Around Cutout: 0.8125"
  • 16 Hole Bolt Pattern: 1.9375" (shortest distance), 9.625" (longest distance) - only 8 screws will be used to mount your woofer
Notes:
  • If you are using a 10" woofer other than the SSV Works 10M, you may have to drill new screw holes.
  • The magnet diameter of your aftermarket 10" woofer should not exceed 8.0".

100% Fiberglass Construction: The unloaded subwoofer enclosure (X3-US10) is constructed of 100% fiberglass for the best sound quality and bass response. It is finished in a black texture coat to match Can-Am textures and can be custom painted to match your color scheme.

Attached Speaker Wire: Outside of each enclosure is an attached 10" speaker wire terminated by a proprietary connector that directly plugs into SSV Works sound system components. If the enclosure will not be plugged into an SSV Works component, you can cut off the proprietary terminal to reveal bare positive (red) and negative (black) wires. Inside each enclosure is a positive and negative speaker wire terminated by bare wires to connect a compatible 10" subwoofer (sold separately).

Loading accessories...

Customer Q&A

Loading articles...

TOP