Skip Navigation

BlendMount MT-2010 MirrorTap Hardwire Kit

Hardwire your Escort or Radenso radar detector with an RJ-11 plug to your auto-dimming mirror — fits 2011-13 Corvette C6 and 2014-up Corvette C7

Please use BlendMount's Fit Guide to find the right products for your vehicle.

Item # 328MT2010

Low Stock

Add to Cart

Earn up to 30 Rewards points

Ask an expert

Our VA-based experts can help.

1.888.955.6000

Chat

Overview

Our take on the BlendMount MT-2010 MirrorTap Hardwire Kit

If your 2011-13 Chevrolet Corvette C6 or 2014-up Corvette C7 has an auto-dimming mirror, then you've got a convenient power source for your radar detector. The experts at BlendMount created MirrorTap hardwire kits to supply permanent power for your Escort, Beltronics, or Radenso detector with a clean, simple installation that'll leave your windshield uncluttered. Best of all, BlendMount makes this hardwire kit in the United States of America.

Power your radar detector from your auto-dimming mirror

If your 2011-13 Chevrolet Corvette C6 or 2014-up Corvette C7 has an auto-dimming mirror, then you've got a convenient power source for your radar detector. The experts at BlendMount created MirrorTap hardwire kits to supply permanent power for your Escort, Beltronics, or Radenso detector with a clean, simple installation that'll leave your windshield uncluttered. Best of all, BlendMount makes this hardwire kit in the United States of America.

Tap into the mirror's wiring for reliable juice

This MT-2010 MirrorTap kit features a 10-inch long cable with a 2-amp inline fuse to ensure safe, reliable power delivery to your radar detector from your rear-view mirror. The military-grade taps measure 0.05" wide each and should fit comfortably into the mirror's wiring harness. A braided black flexible sleeve holds the fuse and looks factory so the kit won't stand out. Once you've connected the power and ground taps, attach the cable to your detector and adjust the slack with the included cable tie. Boom, done.

Works with RJ-11 (telephone-style) plug openings

The telephone-style RJ-11 plug works with a wide variety of radar detectors from Escort, Beltronics, and Radenso — be sure to check your detector to make sure it's compatible. After your install, you'll have a barely visible cable running discreetly to your detector from the mirror instead of a flat, shiny phone cord.

Product Highlights:

  • radar detector hardwire kit for use in 2011-13 Corvette C6 and 2014-up Corvette C7 models with auto-dimming mirror
  • works with Beltronics, Escort, and Radenso radar detectors with RJ-11 plugs
  • supplies power to your detector from the auto-dimming mirror
  • 10" 24-gauge cable with 2-amp inline fuse
  • 0.05" width military-grade taps
  • cable tie included
  • made in the U.S.A.
  • warranty: 1 year
  • Our 60-day money-back guarantee

What's in the Box:

  • 10" Power cable w/ RJ-11 connector and inline 2A fuse (non-replaceable)
  • Two 5" wire-ties
  • Installation instructions
Reviews
Details

Hands-on research

Product Research

Features

Overview: BlendMount's MT-2010 MirrorTap kit lets you power your Beltronics, Escort, or Radenso radar detector from your 2011-2013 Chevrolet Corvette C6 or 2014-up Corvette C7 auto-dimming mirror. The MirrorTap kit provides a cleaner looking installation while freeing up your dash or console power socket. Please use BlendMount's Fit Guide to find the right products for your vehicle.

Construction: The MirrorTap kit includes a 10" Power Cable constructed of a pair of 24 AWG wires protected by a durable outer sheath. One end features an RJ-11 connector, that plugs into your radar detector, while a pair of .050" military-grade terminals on the other end are used for tapping into the rear-view mirror's power and ground terminals. This end also houses an inline 2A fuse encased in rubber (non-replaceable).

Installation: Installation of the MirrorTap requires identifying the auto-dimming mirror's power and ground wires, located in the factory Molex connector, using a voltmeter or multimeter (not included). The Power Cable's terminals will be used to "tap" into the identified power and ground pin-connections, providing a snug fit into the connector. Two wire-ties are included for securing the cable to the factory wiring, providing a cleaner looking installation as well as helping provide strain-relief for the Tap connections.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Articles

Searches related to the BlendMount MT-2010 MirrorTap Hardwire Kit Hardwire your Escort or Radenso radar detector with an RJ-11 plug to your auto-dimming mirror — fits 2011-13 Corvette C6 and 2014-up Corvette C7