About the Dynaudio Xeo 2
Expansive sound from a small speaker
Stream content to the Dynaudio Xeo 2 wirelessly via Bluetooth®.
Expansive sound from a small speaker
Dynaudio's Xeo 2 destroys the idea that small speakers produce a limited sound field. When we heard a pair demonstrated at our headquarters, experienced Advisors gaped at one another in disbelief. The soundstage expanded out to fill the room, and each note was so precise, I felt like I was standing next to the musicians.
Innovative driver design
The Xeo 2's woofers are made from Dynaudio's signature material: Magnesium Silicate Polymer (MSP). Each MSP cone is molded in a single piece, which helps to optimize sound dispersion. There's no separate dust cap, which further enhances the cone's structural integrity.
The tweeters are also high-tech — and uniquely Dynaudio, through and through. They use aluminum-wired voice coils that are lighter than usual. That allows them to be larger, which results in better control and lower distortion. The tweeter itself is a soft dome with a special coating that improves dispersion so it sounds amazing no matter where you're sitting.
If you've noticed visible copper leads when looking at photos of Dynaudio tweeters, that's intentional. The surround is inverted for better dispersion, so the leads naturally show. Just one more sign of innovation in pursuit of expansive sound.
You don't have to have a degree in engineering to understand why the Xeo 2's design is important — the proof is in the sound. Your music doesn't sound like it's trapped in a cabinet — it sounds like it's filling the entire room.
Unlike most powered stereo speaker pairs, each Dynaudio Xeo 2 has two 65-watt amplifiers built in, with equal power going to the tweeter and woofer. And that makes them very versatile and flexible.
Each speaker has a couple of analog connection options: a 3.5mm "aux" input, and a left/right stereo RCA input. The Toslink optical input lets you connect a digital source directly.
Great performance for TV and movies, too
One of our sales team leaders brought in a copy of Star Wars: The Last Jedi on Blu-ray, and we leapt at the chance to use it to demonstrate some top-flight gear. We screened the massive blockbuster film in one of our dedicated listening rooms, using a Cambridge Audio CXUHD 4K Blu-ray player, a 65" LG OLED TV, and a pair of powered Xeo 2s as our only enhancement of the audio from the TV.
Star Wars films are famous for complex, layered, detailed sound design. The Xeo 2s handled everything — the subtle bass rumble of a starship's engines at cruising speed, loud or soft spoken dialogue, and the soaring orchestral score — with impressive depth and accuracy.
When members of an Advisor training class came in, they were floored. "That's coming from just those two speakers?" asked one trainee, her eyes wide. Another just sat and let the movie take him away, enveloped in the sights and sounds. Just the way an epic film is supposed to be enjoyed.
Dynaudio offers some optional external components that make it even more convenient to get amazing sound out of these speakers in just about any situation.
The Dynaudio Connect box (not included) lets you stream wirelessly to both speakers without any hardwired connection. It also adds an additional optical digital input, a coaxial input, and a USB input for sending audio from a connected computer. Spotify Connect is embedded, so that adds one more convenient source that can stream directly to the speakers over your Wi-Fi® network.
Founded in 1977, Dynaudio is one of the world's premiere speaker companies. Their wide range of speakers for home, car, and pro audio applications are the result of a unique combination of innovative driver technology, state-of-the-art manufacturing, and true hand-craftsmanship. Dynaudio designs and builds all of its drivers at the company's HQ in Skanderborg, Denmark.
Product highlights (each):
- 1-1/8" soft-dome tweeter
- 5-1/2" MSP (Magnesium Silicate Polymer) cone woofer
- bi-amped design provides 65 watts apiece to woofer and tweeter (130 watts total)
- stream wirelessly via Bluetooth®
- digital processing handles high-res files up to 24-bit/192kHz
- frequency response: 40-24,000 Hz (±3dB)
- power, volume, and Bluetooth pairing buttons on top of speaker cabinet
- removable grille
- remote control
Connections and Controls (located on each speaker):
- digital optical input (24-bit/192kHz)
- stereo analog RCA input
- 3.5mm analog aux input
- USB Type A input for firmware updates
- speaker positioning controls:
- three-position speaker location switch (Neutral, Wall, Corner)
- switchable left/right toggle
- zone selector for multi-room systems
Dimensions and Warranty:
- 6-13/16"W x 10"H x 8-13/16"D
- weight: 8.8 lbs. each
- designed, engineered, and assembled in Denmark
- warranty: 5 years (8 years with registration)
- Our 60-day money-back guarantee
- MFR # 988341
What's in the box:
- 2 Powered bookshelf speakers
- Rubber base (pre-installed)
- 2 Grilles
- Two 8' AC power cords
- Remote control
- 2 "AAA" batteries
- 5' Stereo RCA cable
- 5' Stereo minijack cable
- 58" Optical digital cable
- Toslink-to-mini adapter
- Start Guide
- Tidal brochure
Dynaudio Xeo 2 reviews
Thanks for submitting your review
More details on the Dynaudio Xeo 2
Features & specs
|Aux Input||3.5mm, RCA|
|Tweeter Size (Inches)||1.1|
|Tweeter Material||Coated silk|
|Midrange Size (Inches)||---|
|Woofer Size (Inches)||5.5|
|Woofer Type||Magnesium Silicate Polymer|
|Watts RMS (Continuous)||260|
|Watts Maximum (Peak)|
|Max. Digital Audio Bit Depth||24-bit|
|Max. Digital Audio Sample Rate||192 kHz|
|Control by app||N/A|
|Parts Warranty||5 Years|
|Labor Warranty||5 Years|
Powered Wireless Bookshelf Loudspeakers: Each Dynaudio Xeo 2 powered wireless speaker features a 1.1" precision-coated silk soft-dome tweeter and one 5.5" magnesium silicate polymer (MSP) mid-woofer powered by a 130 watt digital amplifier for true high-end sound with great dynamic range, expansive soundstage, exceptional accuracy, and a natural tonal balance. The Dynaudio Xeo 2 provides Bluetooth, analog, and digital connectivity. Each speaker will need to be plugged into an AC outlet. However, there is no need for a physical connection between the speakers, because one powered speaker streams to the other powered speaker wirelessly.
Precision-Coated Soft-Dome Tweeter: Dynaudio has relied on a silk soft-dome tweeter for recreating high frequencies since the company was founded, continuously improving and perfecting the soft-dome principle over the years. Dynaudio tweeter designs require a time consuming, labor-intensive manufacturing process where the fine fabric diaphragm is shaped into a dome and is then treated with a specially formulated coating. As a further refinement, the tweeter's aluminum voice-coil is suspended in a magnetic oil, which increases power handling while also improving the dome's excursion. The result is the celebrated Dynaudio tweeter, featuring a balanced and natural frequency response.
- Damping Chamber: The tweeter also includes a special damping chamber integrated into the rear of the construction, deadening any back-wave energy through an acoustic absorber. The advantages include high power handling and unimpeded excursion of the soft-dome dome tweeter.
- Ferrofluid Magnet: The voice coil is positioned within the magnetic field of the tweeter magnet. When the loudspeaker reproduces sound, the voice coil, powered by the amplifier current, moves at a speed of up to 25,000 waves per second. To achieve a uniform movement, a magnetic fluid called ferrofluid is used around the voice coil. Ferrofluid works like a subtle shock absorber and eliminates excess energy. Due to the relatively high current and extremely fast movements, the voice coil is under constant thermal stress. The ferrofluid dissipates this heat, while also increasing power handling capabilities. The frequency range of the tweeter can thus be expanded while the frequency response remains smooth and linear, delivering the highest resolution and most neutral sound reproduction.
Note: The surround of the tweeter is inversed to improve dispersion. This leaves nowhere for the lead wires to go behind the tweeter, so the lead wires are positioned above the surround.
Magnesium Silicate Polymer (MSP) Woofer: For bass and midrange drivers, Dynaudio uses a proprietary composite of magnesium silicate polymer (MSP), a material that combines low mass, high rigidity, and ideal internal damping properties. This exclusive driver membrane is an immediately visible and characteristic feature of Dynaudio loudspeakers. Formed in a special manufacturing process, this membrane is a unique design with the distinctive, geometrically optimized form of the cone further enabling smooth sound dispersion.
- Aluminum Voice Coils: A distinct and major Dynaudio innovation is the use of pure aluminum wire for voice coils. In comparison to the more commonly used and much heavier copper alternative, aluminum allows for more windings and extraordinarily large diameter coils that remain extremely light. By using aluminum instead of copper for a bass driver, it is possible to effectively double the coil's diameter without increasing its mass. Due to the thermal properties of aluminum, cooling of the voice coil is dramatically improved as well. In combination with the equally light voice coil former and powerful magnet materials used in Dynaudio designs, cone excursion is much more controlled and the driver follows the music signal from the amplifier with a remarkable sense of dynamics and accuracy.
- Die-Cast Aluminum Basket: The Dynaudio MSP woofer utilizes a low-resonance, highly warp-resistant basket made of die-cast aluminum. Due to the stiffness of this non-magnetic material, the basket can be designed with aerodynamically formed ribs to reduce air compression behind the moving membrane. Another advantage is its long-term resistance against thermal, mechanical or other external influences.
Twin Bi-Amplified Digital Amplifiers: The Dynaudio Xeo 2 powered wireless speaker system utilizes twin 65 watt amplifiers inside of each speaker for a total system power of 260 watts. Each speaker's tweeter and woofer has its own 65 watt digital amplifier that has been specifically matched, individually tuned, and precisely optimized to power that particular driver. This means you don't need to concern yourself with matching other components to the speakers, because Dynaudio has done all the work for you. Because the amps and drivers are so close together, there's less internal wiring. Less internal wiring means less possibility of interference. It also means the signal can stay in digital form for longer - only being converted to analog at the last possible moment - before it's output as physical sound. The result is clearer, cleaner audio at any listening level.
Advanced DSP (Digital Signal Processing): Advanced DSP (digital signal processing) filters and adaptive bass technology tailor the sound of the Xeo 2 speakers to your room and application. You can select between 3 DSP modes - Neutral (free-standing placement), Wall (placed near a wall), or Corner (placed in a corner). You can also select which speaker is Left or Right.
Rigid Bass Reflex Enclosure: The Dynaudio Xeo 2 powered wireless speaker system utilizes a bass reflex design with a rear-firing port on the back of each speaker for greater efficiency and bigger bass response. The 1.1" tweeter and 5.5" woofer sit in a solid aluminum baffle and ultra-stable composite housing designed to minimize unwanted interference. Additional internal damping, strengthening, and bracing in critical sections of the cabinet substantially reduce unwanted resonance. The included grilles have been designed so they do not influence the sound dispersion of the speakers. They are attached to the speaker cabinets with magnets and may be removed if needed.
Bluetooth Audio Streaming: The Dynaudio Xeo 2 features built-in Bluetooth 4.1 with support for wireless audio streaming (A2DP) and control (AVRCP). You'll be able to wirelessly stream stored music, music apps, and other audio content from your Bluetooth source device (such as your smartphone, tablet, or computer) to the Xeo 2 speaker system. You'll also be able control basic playback functions (such as Play/Pause, Previous/Next Track, & Volume) from the included IR remote. You can pair multiple Bluetooth source devices to the Xeo 2 system, but only one device can be connected and played back at a time.
Note: The Dynaudio Xeo 2 speaker system does not support Bluetooth hands-free communication for making or answering phone calls.
Digital & Analog Inputs: In addition to wireless Bluetooth connectivity, the Dynaudio Xeo 2 speaker system offers digital and analog wired inputs. There is one optical (toslink) digital input that will accept 2ch PCM audio up to 24-bit/192kHz (not compatible with Dolby Digital/DTS). There are also two analog audio inputs, consisting of 3.5mm Aux input and one stereo RCA input.
Note: The digital & analog inputs are only located on one of the speakers.
Simple Controls: The Dynaudio Xeo 2 powered wireless speaker system can be fully controlled with the included IR remote, while buttons on top of the cabinet let you switch it on/off or change the volume. The operational state of the system is indicated by two LEDs on the front cabinet.
Mounting Options: The Dynaudio Xeo 2 powered wireless speaker system can be placed on a table-top, desk, shelf, or set of speaker stands. Pre-installed rubber bases provide a non-slip surface. The Xeo 2 can also be wall-mounted using proprietary brackets (sold separately).
- Floor Stand: The Stand 10 or Stand 20 (both sold separately) provide a stable platform for the Xeo series loudspeakers. Their shape and design beautifully complements the clean lines of Dynaudio's Xeo series speakers. The stands feature sturdy aluminum construction, offer wire management, and include the option of rubber and spike feet.
- Desk Stand: The Xeo 2 desk stand (sold separately) boasts a rigid, low-resonance aluminum construction, and raises the Xeo 2 above the surface to enable optimum sound quality and performance from the loudspeaker. The internal cable channel allows the wires to disappear into the desk stand and below the integrated plinth.
- Wall Bracket: Another option is the discrete and elegant Xeo 2 wall-bracket (sold separately) that allows you to directly mount the Xeo 2 almost flush to the wall; or alternatively to mount the Xeo 2 with some extra space to the wall, allowing you to angle the speaker 180° left or right. The Xeo 2 wall-bracket is made of solid aluminum and provides a low-resonance, rigid and elegant bracket for the speaker.
Optional Multiroom Audio: Optional components like the Dynaudio Connect, Xeo Master Remote, Xeo Extender, & Dynaudio Link, as well as additional Xeo speakers enable setting up a wireless multi-room and multi-source system (up to 3 zones).
- Dynaudio Connect: The Dynaudio Connect (sold separately) connects the Xeo 2 speaker system to your home WiFi network and lets you stream music directly from your smartphone, tablet, laptop, or computer. Dynaudio Connect even supports Spotify Connect, so you can stream music directly from your Spotify account. The Connect also features analog inputs (including 3.5mm Aux and stereo RCA input), as well as digital inputs (including USB-B and optical/coaxial digital) to connect your external analog and digital audio devices. In addition, the Dynaudio Connect offers built-in Bluetooth.
- Xeo Master Remote: The Xeo Master Remote (sold separately) can be used to turn the speakers on and off, change the volume, and select a Dynaudio Connect (up to 3) and its connected signal sources.
- Xeo Extender: The Xeo Extender (sold separately) extends the reception range of the Dynaudio Connect. As a result, Xeo speakers or other Xeo components can be operated further away from the Dynaudio Connect.
- Dynaudio Link: The Dynaudio Link (sold separately) receives wireless signals from a Dynaudio Connect and outputs analog and digital signals from its connections to your existing stereo system.
Power Requirements: Each powered wireless speaker comes with an 8' detachable AC power cord and will need to be plugged into an AC wall outlet or surge protector (sold separately).
Note: The Dynaudio Xeo 2 powered wireless speakers are not battery powered.
Auto Standby: The Dynaudio Xeo 2 speaker system will automatically switch to standby mode if there is no audio signal for 20 minutes.
Firmware Updates: There is a USB-A port on the back-panel of each Xeo 2 speaker which allows for firmware updates. The firmware updates can be downloaded from the Dynaudio website onto a USB thumbdrive which will then need to be inserted into each speaker's USB-A port.