About the Roswell R 6.5 Tower
The Roswell experience
The Roswell experience
What began as a homespun start-up out of a family garage in Canada has now become a go-to name in marine audio worldwide. Over two decades later, the folks at Roswell are just as passionate about audio solutions for boating and watersports as when they began. Choosing Roswell audio gear for your boat ensures you'll enjoy innovative sound, contemporary design, and superior build quality every time you venture onto the water.
Point great sound where you need it with these very cool, very tough R Series tower speakers. Injection-molded plastic with UV protection house durable 6-1/2" woofers and 3/4" silk dome tweeters coaxially mounted in uniquely designed grilles. Roswell conceals a built-in 2-way crossover network in each speaker for absolute clarity.
With some serious power, these tower speakers will cut through the crash of your wake, the whip of the wind, and the thunder of your motor, serving up vibrant, detailed audio for the gang on the boat and the hot-dogger you're pulling. Roswell's swiveling clamp system is easy to install and lets you rotate the speakers to suit your situation.
Winning sound isn't the only thing these marine speakers have going for them — built-in, multi-color LED lighting will transform the deck, according to your mood. Use Roswell's RGB controller (not included) to access pre-programmed colors and patterns for a serious light show.
Built for the outdoors
Roswell designed these superior speakers to endure the extremes of life on the water. Salt, dust, fog, and UV rays can't stop the R Series speakers from doing what they do best for seasons to come.
- 6-1/2" marine tower speakers (pair)
- injection-molded plastic housing with UV protection
- 3/4" silk tweeter
- built-in 2-way crossover (6 dB per octave)
- built-in LED lighting (RGB controller not included)
- 360° swiveling universal clamp system with adapters
- anthracite grilles
- sealed motor structure with Deutsch wiring harness included for water-tight connection
- handles up to 60 watts RMS (120 watts peak power)
- frequency response: 69-20,000 Hz
- sensitivity: 87 dB
- impedance: 4 ohms
- dimensions: 7" W x 8-5/8" D x 9-3/4" H (w/bracket)
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # C920-1702
What's in the box:
- Two 6.5" RGB tower speakers w/integrated mounting clamps
- Two 30" 6-pin wiring harnessess (Deutsch connector on one end / bare-ended wire on other end)
- Four 3" clamp inserts (installed)
- Four 2.375" clamp inserts
- Four 1.90" clamp inserts
- Two 14.5" safety cables
- Two 3/4" screws
- 2 Flat washers
- Two 1" set-screws
- Twelve 18 ga. crimp-connectors
- Installation instructions
Thanks for submitting your review
More details on the Roswell R 6.5 Tower
Features & specs
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
87 dB at 1 watt |
|Max RMS Power Handling||60|
|Peak Power Handling (Watts)||120|
Enclosure & Drivers: The Roswell R 6.5" Tower Speakers feature a coaxially mounted 6.5" woofer, with a polypropylene cone and rubber surround, and a coaxially mounted 3/4" silk dome tweeter. A 6dB/oct. crossover is integrated into each driver for water-tight integrity. Both drivers are housed in a durable anodized aluminum enclosure with a Centrex plastic grille, designed to withstand the harsh marine environment.
Marine Tested: The R Series marine speakers are tested using ASTM standards, 500 hours UV exposure and 500 hours salt fog spray.
LEDs: The R 6.5" Tower Speakers include built-in RGB LEDs in the back of the tweeter casing, to create a glow on the woofer cone, as well as along each side of the enclosures. Depending on what combination of LED wires is connected, they can light red, green, blue, yellow, magenta, cyan, or white. A 12 volt power supply is needed to turn the LEDs on. The LEDs can also be controlled using Roswell's RGB Remote Control (sold separately).
Wire Terminal: Each tower speaker includes a 30" 6-pin wiring harness that hold both the signal wires and LED power wires. The harnesses include a water tight Deutsch plug, for connecting to the tower speaker, with bare-ended 18 ga. wire on the other end. Both harnesses are encased in a heavy-duty rubber sheath for added protection.
Mounting: The R 6.5" Tower Speakers include an attached machine-billet, 360˚ Universal Clamp for attaching the speakers to wakeboard towers and rails. Three sets of clamp inserts are provided for attaching to 1.90", 2.375", and 3.0" diameter tubing. Two 14.5" safety cables are provided, along with mounting hardware.
Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Roswell optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.