About the Roswell R1 Pro Tower
The sound of the future
The sound of the future
You're serious about quality time on your boat, which is why Roswell created their award-winning R1 Pro Series tower speakers. Just look at these premium speakers and you know they're different, with their side-mounted tweeter and translucent housing. Each weather-sealed enclosure houses a durable 8" woofer and component-style 1" compression tweeter handling up to 200 watts RMS, so it can overpower the crash of your wake, the whip of the wind, and the thunder of your motor. Roswell's swiveling clamp system is easy to install and lets you rotate the speakers to suit your situation.
Glow on the water
At night, get a glow like no other, thanks to built-in, multi-color LED lighting emanating from around each driver and through the light-permeable housing. Using these tower speakers as a light source, you can transform your on-the-water experience, according to your mood. Use Roswell's RGB controller (not included) to access pre-programmed colors and patterns for a serious light show.
Built for the outdoors
Roswell designed these superior speakers to endure the extremes of life on the water. Salt, dust, fog, and UV rays can't stop the R1 Pro Series speakers from doing what they do best for seasons to come.
The Roswell experience
What began as a homespun start-up out of a family garage in Canada has now become a go-to name in marine audio worldwide. Over two decades later, the folks at Roswell are just as passionate about audio solutions for boating and watersports as when they began. Choosing Roswell audio gear for your boat ensures you'll enjoy innovative sound, contemporary design, and superior build quality for years every time you venture onto the water.
- 8" marine tower speakers (pair)
- weather-resistant translucent housing with UV protection
- side-mounted 1" compression tweeter
- built-in LED lighting (RGB controller not included)
- 360° swiveling universal clamp system with adapters
- sealed motor structure with Deutsch wiring harness included for water-tight connection
- handles up to 200 watts RMS (400 watts peak power)
- frequency response: 60-20,000 Hz
- woofer sensitivity: 95 dB
- tweeter sensitivity: 103 dB
- impedance: 4 ohms
- dimensions: 15-1/2"W x 13-3/8"D x 12-1/4"H (w/bracket)
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # C920-1910
What's in the box:
- Two 2-way waketower speakers w/integrated mounting clamps and attached 18" safety lanyard
- Two 30" 6-pin wiring harnessess (Deutsch connector on one end / bare-ended wire on other end)
- Four 3" clamp inserts (installed)
- Four 2.375" clamp inserts
- Four 1.90" clamp inserts
- Twelve 18 ga. crimp-connectors
- Two 5/8"-11 Set screws
- Installation instructions
Thanks for submitting your review
More details on the Roswell R1 Pro Tower
Features & specs
|Tweeter Composition||Not given|
|Woofer Surround||Not given|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
103 dB at 1 watt |
|Max RMS Power Handling||200|
|Peak Power Handling (Watts)||400|
Enclosure & Drivers: The Roswell R1 Pro Tower Speakers feature an all-weather 8" woofer with a polypropylene cone, and a side-mounted 1" compression horn tweeter with integrated protection circuit. Both drivers are housed in durable Centrex plastic enclosures that are designed to withstand the harsh marine environment.
Marine Tested: The R1 Series marine speakers are tested using ASTM standards, 500 hours UV exposure and 500 hours salt fog spray.
LEDs: The R1 Pro Tower Speakers include built-in RGB LEDs around the speaker rim on both the woofer and compression horn tweeter, creating a glow on the speaker cones. The rear section of the woofer enclosure is translucent with internally mounted LEDs, allowing the rear housing to glow as well. Depending on what combination of LED wires is connected, they can light red, green, blue, yellow, magenta, cyan, or white. A 12 volt power supply is needed to turn the LEDs on. The LEDs can also be controlled using Roswell's RGB Remote Control (sold separately).
Wire Terminal: Each tower speaker includes a 30" 6-pin wiring harness that hold both the signal wires and LED power wires. The harnesses include a water tight Deutsch plug, for connecting to the tower speaker, with bare-ended 18 ga. wire on the other end. Both harnesses are encased in a heavy-duty rubber sheath for added protection.
Mounting: The R1 Pro Tower Speakers include an attached machine-billet, 360˚ Universal Clamp for attaching the speakers to wakeboard towers and rails. Three sets of clamp inserts are provided for attaching to 1.90", 2.375", and 3.0" diameter tubing.
Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Roswell optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.