About the Shadow-Caster SCM-SWITCH-O/O/M
Turn on the lights
Turn on the lights
This rugged, versatile little switch gives you convenient control of your boat's marine lighting system. If you're looking for a basic on-off switch for your boat's lighting system, this one's made for marine use and plenty tough enough to survive life in the outdoors.
But that's not all it can do. When you combine this switch with the Shadow-Caster SCM-SNLC single-zone lighting controller (sold separately), you'll enjoy complete ShadowNET® lighting control functionality. Just toggle the switch to set your color or fade mode.
Product highlights:
- three-position (on/off/momentary) toggle switch
- compatible with two-color and multi-color lighting systems
- can be used with Shadow-Caster SCM-SNLC single-zone lighting controller (sold separately)
- rated IP66/68
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # SCM-SWITCH-O/O/M
What's in the box:
- 1 Toggle/momentary switch
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Shadow-Caster SCM-SWITCH-O/O/M

Product Research
Features
Overview: The Shadow-Caster SCM-SWITCH-O/O/M is a 3-position marine LED lighting switch that can control your Shadow-Caster SCM or SCR Series Marine LED lighting, or SCM-SNLC single zone lighting controller (all sold separately). The 3-position switch toggles in one direction, for powering the LEDs On/Off and cycling through the available colors, and provides a momentary selector-switch in the opposite direction, letting you cycle through the available Operation Modes (strobe, color-fade, etc.). The SCM-SWITCH-O/O/M features six brass 1/4" terminals for connecting slip-on terminals, along with two internal blue LEDs for lighting both sections of the switch.
Power Handling: The Shadow-Caster SCM-SWITCH-O/O/M can be used for either +12VDC and +24VDC applications, with a maximum current rating of 20A for +12VDC systems, and 15A for +24VDC systems.
Note: If connecting the SCM-SWITCH-O/O/M directly to SCM or SCR LEDs in a +24VDC system, a 600Ω resistor (not included) must be added across pin 7 and Ground.
Marine Rated: The Shadow-Caster marine LED lighting switch carries an IP66/68 waterproof rating (above-panel section only).
Overall Dimensions:
- Width: 0.964"
- Height: 1.951"
- Depth: 2.065"
Cut-Out Dimensions:
- Width: 0.825"
- Height: 1.550"
- Depth: 1.535" (not including wiring)
Loading accessories...
Customer Q&A
Loading articles...