About the Scanstrut ROKK Nest Qi charging pocket
A Qi-charging cubby for your boat
A Qi-charging cubby for your boat
The Nest waterproof wireless charge system gives you wireless Qi charging and a secure space for your phone, all in one rugged, marine-ready cubby. This sealed, self-draining unit can be installed in consoles, seating, cabinetry, or wherever is most convenient for you.
This IPX6-rated cubby starts charging the second you slide your phone into the opening. The grippy mat keeps the phone from sliding around, and the front lip adds an extra level of security. Rounded corners and a tapered front prevent snagging, so you can install it in even your boat's most high-traffic areas.
Versatile and easy to install
Installation involves a basic cut into the panel of your choice, and the kit includes four mounting screws and a front fascia that will give you a professional-looking installation with minimal hassle. With drains front and rear, plus a push-fit drain tube option, you won't have to worry about water accumulating in the Nest.
That, combined with foreign object detection, means you can also use this cubby for sunglasses, keys, and other personal items. It's a smart addition to any boat's cabin.
- Qi charging phone storage cubby (5 watts)
- includes charger, pocket, front bezel, and self-tapping screws
- ideal for boats and RVs
- grippy mat and front lip keep phone secure
- IPX6 waterproof design
- UV-stable and heat-resistant
- installs in consoles, seating, cabinetry using four included screws
- drains through front or rear (drain tube not included)
- foreign object detection lets you store personal gear in the cubby
- works with 12-volt and 24-volt systems
- dimensions: 7.17" D x 4.17" (top); 5.59" (bottom) W x 4.17" H
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # SC-CW-06E
What's in the box:
- Front bezel
- Wireless charger (attached 11" power & ground wires)
- Locking collar (attached to charger)
- Four 3/4" counter-sunk screws
- Five 3/8" screws
- Installation instructions w/cutout template
Thanks for submitting your review
More details on the Scanstrut ROKK Nest Qi charging pocket
Overview: The Scanstrut ROKK Nest wireless Qi phone charger can safely house and wirelessly charge your compatible smartphone in the marine environment. The Nest is designed to be installed inside a boat console or cabin wall, providing protection for your device, while using Qi wireless charging technology to keep it charged and ready when needed.
Note: Cutting and drilling of the mounting surface will be required for installation.
Qi Wireless Charging: Qi is the global standard for smartphone wireless charging. Wireless charging uses electromagnetic fields to safely transfer power from a transmitting source to a receiving device to wirelessly charge the device's battery. The included Qi charging module mounts to the underside of the Nest, using the provided hardware and locking collar, and can provide 5W (5V/1A) of charging power for your device. The Nest also includes foreign object detection technology, which automatically prevents charging if something other than a Qi-enabled device is placed inside the mount. This allows the Nest to be used to safely store other small, non-charging objects such as keys or wallets.
Nest Mounting: The ROKK Nest is designed to be installed into a console or wall, requiring approximately 5" x 3" to be cut out for mounting (cutout template provided for exact measurements). Mounting screws are provided for securing the Nest to the mounting surface. Applying a bead of silicon sealant around the mounting flange is recommended (not included). An outer trim ring gets attached to the front of the Nest. This provides a lip around the opening, helping keep items from falling out, even in a moving boat. A rubber liner inside the bottom of the mount provides a tactile grip on objects, preventing them from sliding around.
IPX6: Designed for marine and outdoor use, the Nest Qi charging mount features an IPX6 waterproof rating, making it impervious to water. Any water that gets inside the Nest will exit through the provided drain hole at the front of the mount. Two 3/16" diameter drain-hole locations at the rear of the mount can be drilled out if needed, letting you attach an optional drain tube (sold separately).
Powering: The Nest's Qi charging module includes attached 11" bare-ended power and ground wires that will need to be connected into the craft's electrical system. The Nest can be powered from 12VDC or 24VDC systems and requires 1.5A (max.) of input power.
Testing & Certification: The ROKK Edge charger uses Scanstrut's world-renowned expertise in waterproofing technologies, UV stabilization techniques, and premium grade materials to ensure long-lasting durability. Development included subjecting it to the harshest environmental, thermal, vibration, and on-water testing programs. International certifications include: Qi, CE, FCC, and RoHS.
- Input Voltage: 10-30VDC
- Compatible Systems: 12VDC and 24VDC
- Maximum Input Current: 1.5A
- Output Power: 5W (5V/1A)
- Standby Current Draw: <0.03W
- Waterproof Rating: IPX6
- Outer: Width = 5.60"/3.84" (rear), Height = 4.24"/1.37" (rear), Depth = 7.17"
- Inner: Width = 4.68" (bottom)/3.73" (top), Height = 2.65" (front)/0.33" (rear), Depth = 6.40"
- Maximum Mounting Panel Thickness: 0.63"