About the Scanstrut ROKK Charging USB socket
Charge up to two USB devices
Charge up to two USB devices
Need a USB charging outlet on your console? How about two? This rapid-charge waterproof USB charger from Scanstrut offers dual-socket connectivity, marine-rated toughness, and a low-profile design that's ideal for life in the outdoors.
You can charge up to two devices at once, and they'll charge up to three times faster than they would in standard USB sockets. The “click and lock” anti-snag cover separates the cables and keeps them secure during charging, and with the cover closed, the charger is IPX6 waterproof whether you're charging anything or not. It mounts on your console using the included template and mounting hardware.
On the outside, this marine-rated charger stands up to moisture and punishing UV rays, while on the inside, the circuit boards are coated with anti-corrosion material and the hinge and spring are made from long-lasting 316 stainless steel.
This charger will work with any USB Type-A connector, while the standard barrel size works with existing USB sockets.
- rapid-charge waterproof USB charger
- dual-socket connectivity
- charges up to three times faster than standard USB ports
- designed for marine and outdoor use
- "click and lock" anti-snag cover
- IPX6 waterproof design
- moisture- and UV-resistant
- corrosion-resistant circuit boards
- 316 stainless-steel hinge and springs
- works with any USB Type-A connector
- output current: 4.2 amps (total)
- dimensions: 1.53" (39mm) H x 3.7" (94mm) L
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # SC-USB-02
What's in the box:
- Weatherproof 12/24V USB charger
- Locking collar
- Gasket w/3M adhesive backing
- One 3/4" screw
Thanks for submitting your review
More details on the Scanstrut ROKK Charging USB socket
Overview: The Scanstrut ROKK SC-USB-02 is a dual-socket, waterproof USB charger, with up to 3 times faster charging than with standard USB chargers. Designed for the marine environment, the SC-USB-02 can be mounted to a console or cabin wall, and can be powered from either 12V or 24V systems. A spring-loaded cover protects the USB sockets from the elements, and can even be closed with USB cables plugged in. Rubber seals in the base of the charger provide a tight seal around the USB cables (not included) when installed.
Note: Drilling a 1.14" (approx. 1-1/8") diameter hole in the mounting surface will be required for installation.
USB Charging x2: The SC-USB-02 features two USB type-A sockets, letting you charge 2 devices at the same time, up to 3 times faster charging than standard USB sockets. The waterproof charger can provide a total of 4.2A of output current for the two sockets (combined), and can be installed in either 12V or 24V electrical systems.
Waterproof Design: The ROKK USB dual USB charger features a spring-loaded "Click & Lock" lid that provides a watertight seal when closed, with or without USB cables installed. This not only keeps the connections free from water ingress, but also provides protection from the USB cables inadvertently getting unplugged. Rubber seals around the spring-loaded lid and the USB cable ports give the SC-USB-02 an IPX6 weatherproof rating when closed.
Mounting: Designed to be mounted to a cabin wall or console, the body of the SC-USB-02 forms a threaded right-angle that allows it to be mounted flush to the mounting surface. Mounting requires a 1.14" (approx. 1-1/8") diameter hole to be drilled, and surfaces up to 1" thick can be used. A threaded mounting-collar allows the assembly to be tightened together, and a 3M adhesive gasket is included to seal the mounting area.
Power: The rear of the USB charger features two 0.25" male slip-on terminals for attaching power and ground wire (sold separately), for connection to the craft's electrical system. Both 12V and 24V systems are compatible.
- Input Voltage Range: 12V-24V
- USB Output Voltage: 5V (± 5%)
- Maximum Output Current: 4.2A (Total)