Features

Overview: The Radenso Pro M radar/laser detector features best-in-class sensitivity, with long-range radar alerts and smart filtering to prevent false alerts. With the newest MultaRadar and Gatso RT3, the Pro M is one of the most up-to-date detectors in the market today. The Pro M also has built-in GPS that lets you lock out known sources of false alerts along frequently-traveled roads. With a built-in and updateable red light and speed camera database, you will be alerted in plenty of time as you approach these areas. The Pro M comes with a straight cord with a built-in power switch on the plug, windshield suction cup mount, and a hard shell storage case.

Radar Bands: The Radenso Pro M detects the following radar bands:

• X Band: 10.525 GHz (+/- 50 MHz)
• K Band (narrow): 24.1 GHz (+/- 90 MHz)
• K Band (wide): 24.1 GHz (+/- 150 MHz)
• K Band (super narrow): 24.135 GHz (+/- 50 MHz)
• Ka Band (narrow): 33.8, 34.7, 35.5 GHz (+/- 120 MHz)
• Ka Band (wide): 33.4 - 36 GHz (including Ka band POP on/off)
• MultaRadar (MRCD/MRCT)
• Gatso RT3

Laser Detection: The Pro M also detects and alerts you of the use of laser by law enforcement. Laser alerts are not muted when using the AutoCity Mode, or when the detector has been muted manually.

Alerts: The radar detector offers both tone and voice alerts, indicating the detected radar band, frequency (in 3 digits), and signal strength. The display will blink for 3 seconds, and the beeping warning tone will increase in intensity with the increasing signal strength. The signal strength range is expressed over 10 levels. There are over 260 different voice alert messages.

False Alert Filtering: There are numerous sources of radar that cause false alerts, both stationary and moving. Stationary false alerts can be caused by commonly used items such as garage door openers, automatic door openers, traffic speed sensors, and construction road signs. Moving false alerts can be caused by recent vehicle safety features, including adaptive cruise control, blind spot monitoring systems, and emergency collision avoidance system. The Pro M features a selectable 2-level Traffic Sensor Rejection filter (TSR low, TSR high). The Radenso Pro M has multiple filters to make it one of the quietest detectors in the market, including:

• GPS Lockouts: With built-in GPS, you can press a button when you receive a known false alert, marking the current GPS coordinates and exact frequency of the false alert. Next time you drive by this location, the false alert is muted. In addition, you can manually mark your own Points of Interest (POI) in areas where you are likely to receive an alert, or to remind you of potholes, hidden driveways, and other hazards.
• Auto-City Mode: Typical radar detectors have separate city and highway driving modes that have to be manually selected. With built-in GPS, the detector knows how fast you are traveling, and have made switching to city or highway mode automatic. Auto-City Mode intelligently controls the detector's sensitivity and false alert filtering based on your speed. You can choose two speeds: one indicates the speed below which the radar reception is disabled (20 mph recommended) and the other speed indicates the speed below which the detector switches to City mode (35 mph is recommended).
• Signal Analysis: Because not all radar signals are created equal, it has become essential for radar detectors to analyze detected radar signals and determine which are false alerts and which are not. Because of polarity and modulation, even radar signals on the same frequency are not necessarily the same. Radenso is constantly working on signal analysis, and provides continuous software updates to help keep you up-to-date with new false alert-causing vehicles. You can update your detector online through its USB connection.

Power Requirements: The Radenso Pro M is powered by the supplied DC power supply, with a "cigarette lighter" plug and straight cable. An optional Pro Series Direct Wire Kit is available from the manufacturer to hard wire the detector to your vehicle's power wiring, to free up your power adapter and keep your windshield free from clutter.

Mounting: The detector comes with a dual suction cup windshield mount. The detector should be mounted level and aimed out the front of the vehicle, without obstructions. A release button on the top front allows you to unlock the mount for removal. An optional visor mount is available from the manufacturer.

User Interface: There are three top-mounted and two side-mounted buttons for changing settings:

• Power: Power on/off (long press), Enter/exit Menu mode (short press, if no radar signal is received), Mutes volume of the current alert (short press, if radar signal is received)
• Display/Alert Lockout: Select display brightness (bright, dime, smart dark, dark)(short press); GPS lockout (long press)
• Driving Mode: Changes current driving mode (Highway, City, AutoCity (short press), Stores user GPS point of interest (long press)
• Volume +/Volume -: Changes the volume of alert or changes program options when in menu mode

Red Light/Speed Camera Database: The Pro M features a built-in database of red light and speed cameras throughout North America. Precise GPS coordinates of all known Red-Light Cameras (RLC) and Speed Cameras are stored in the unit's memory. As you approach one of the camera locations, you will receive an alert. Free updates to the camera database are available online via USB.

Radar Detector Detectors: The Radenso Pro M is undetectable by VG2, as well as Spectre IV/Elite, at greater than 14 feet. This keeps your detector hidden from radar detector detectors.

Display: The Pro M has a 2" Amber OLED display (measured diagonally) with four brightness settings: Bright, Dim, Smart Dark (dim dot scrolls across the display until alert), and Dark (display is dark until alert).

User Settings: The Pro M's User Settings Menu offers many ways to configure your radar detector to meet your level of expertise and experience. The Menu settings include:

• Setting Mode: Highway, City, AutoCity
• Display Mode: speed/compass, speed/time, speed/voltage, voltage, time, speed
• Units: English, metric
• Alerts: Frequency, bar
• Voice: Off, on
• Auto Mute: Off, on
• One Beep: Off, on
• Minimum Speed Sensing Radar: Off, 10-130 mph
• X Band: Off, on
• K Band: Off, on
• K TS Rej: Off, low, high
• Ka Band: Off, narrow, wide
• Ka Filter: Off, on
• Ka POP Band: Off, on
• Laser Band: Off, on
• MRCT Band: Off, narrow, wide
• MRCD Band: Off, narrow, wide
• Gatso Band: Off, on
• MR Filter: Off, high, low
• Startup Sound: Off, on
• GPS Connected Announcement: Off, on
• GPS Detection by Database Type: Via middle button, you can select different types of GPS alert areas. For editing, use +/- buttons on the side. You can toggle each type of alert on and off.
• GPS Warning Distance: normal (approx. 800 ft), farther (approx. 1200 ft), farthest (approx. 1650 ft)
• Set Local Time:
• Factory Reset
• Delete all user locations

Ticket Free Guarantee: Radenso offers a 1-year limited ticket reimbursement guarantee for all their radar detectors purchased from authorized dealers, including Crutchfield. The guarantee is subject to Terms and Conditions.