About the OSD Forza 6 Pendant Speaker
Robust sound from overhead
Robust sound from overhead
The OSD Audio Forza 6 can deliver warm-sounding background music and audible announcements in spaces with high or irregular ceilings. This rugged, outdoor-rated speaker hangs securely from above and creates a 120-degree cone of sound for listeners below, thanks to a 6-1/2" polypropylene cone woofer and 1" silk dome tweeter.
A built-in transformer tap offers versatile settings for use in a distributed audio system. Or you can power a pair with a standard stereo receiver or amplifier using the 8-ohm bypass setting.
Product highlights:
- 6-1/2" polypropylene cone woofer and 1" silk dome tweeter
- built-in transformer tap for use in a distributed audio system
- 70-volt tap settings: 2.5, 5, 10, and 20 watts
- 100-volt tap settings: 5, 10, 20, and 40 watts
- 8-ohm bypass for use with standard stereo receiver or amplifier
- power handling: 60 watts RMS
- 120° dispersion angle
- sensitivity: 85 dB
- frequency response: 90-20,000 Hz (±3dB)
- IP66 rated: dust proof/water-resistant
- Phoenix-style terminal block input connectors
- installation kit and hanging cable included
Dimensions and warranty:
- 8-3/16" diameter x 11-3/8" height
- weight: 15 lbs.
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # FORZA-6S
What's in the box:
OSD Forza 6 Pendant Speaker owner's manual
- 6.5" 70/100V Pendant speaker
- Top cover
- 4-Pin Euroblock connector (installed)
- 40" Hanging cable w/ 2 attached locking-carabiners
- 2-5/8" Eye hook
- 1" Strain-relief
- Five 3/4" screws
- Two 3/8" screws
- Nut
- Lock-washer
- Instruction sheet
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the OSD Forza 6 Pendant Speaker
Features & specs
| Type | Pendant | |
| Bluetooth | No | |
| Enclosure | Sealed | |
| Tweeter Type | --- | |
| Tweeter Size (inches) | 1 | |
| Midrange Size (inches) | N/A | |
| Woofer Size (inches) | 6.5 | |
| Woofer Composition | --- | |
| Woofer Surround | --- | |
| Power Range (watts) | 60 | |
| Sensitivity | N/A | |
| Impedance (ohms) | 8 | |
| Frequency Response | 90Hz-20k Hz | |
| Connector Type | 4-Pin Euroblock | |
| Height (inches) | 11-3/8 | |
| Width (inches) | 8-3/16 | |
| Depth (inches) | --- | |
| Weight (pounds) | 15 | |
| Wall-mountable | Pendant | |
| Bracket Included | --- | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Product Research
Features
Overview: The OSD Forza 6 pendant speaker is designed for distributed 70/100V audio systems in home and commercial applications. The pendant speaker is an ideal choice for spaces with irregular or uneven architectural features such as vaulted ceilings in high-end home environments, malls, restaurants, bars, museums, and other spaces where multiple speakers are required and placement is challenging.
Speaker Design: The Forza 6 2-way pendant speaker features a 6.5" polypropylene woofer and a 1" silk dome tweeter that can provide accurate, full-range sound with a wide 120˚ dispersion pattern. Both drivers are housed in a sealed enclosure that's UV-resistant and is IP66 rated, making it suitable for both indoor and outdoor applications.
70/100V & 8Ω: The OSD Forza 6 features a built-in 70/100V transformer for commercial applications. An 8Ω bypass also allows it to be used in a "standard" speaker configuration. A tap-dial on top of the speaker provides selections for the following:
- 70V: 2.5W, 5W, 10W, and 20W.
- 100V: 5W, 10W, 20W, and 40W
- 8Ω: Bypass
Connection: Wiring connections to the Forza 6 pendant speaker are made through a 4-pin Euroblock connector located on top of the speaker, accommodating speaker wire up to 14-gauge. Two pins are used for the connection from an amplifier while the other two pins are used for daisy-chaining the signal out to additional speakers. An included strain relief attachment helps prevent the wire connection from being pulled loose (speaker wire sold separately).
Mounting: Designed for pendant mounting, the Forza 6 includes a 40" (3.3') suspension cable with two locking-carabiners. The cable attaches to the speaker using the provided eye-bolt that threads into the top of the speaker housing, while the other end can be attached to a mounting point in the ceiling. A top cover is provided to protect the tap dial and Euroblock wiring connector.
Optional Mounting: The optional Landscape and Surface Mount Kit, found here, can be used for mounting the Forza 6 to a wall or placed on the ground in an outdoor landscape installation. The wall mount features a swiveling bracket that allows the speaker to be precisely aimed. For landscape installation, a ground stake and mounting plate are included.
Loading accessories...
Customer Q&A
Loading articles...
