About the OSD SS2V70
Distribute a single audio source to two zones in a commercial audio system
The OSD SS2V70 lets you connect a single amplified 70-volt input source and create two separate speaker zones of output. The front panel features individual zone selector switches and rotary volume controls for each zone. A pass-through function lets you daisy-chain with additional SS2V70 units to create more zones.
- single-source, two-zone speaker selector
- power handling: 200 watts per channel
- distributes an amplified mono signal in a 70-volt commercial audio system
- direct pass-through lets you daisy-chain with additional SS2V70 modules
- individual zone 1 and 2 selectors and volume controls on front panel
- 2-pin Phoenix-style connectors for input, pass-through, and two output zones
- frequency response: 20-22,000Hz (±0dB)
- 16-gauge, 2-conductor wire recommended (not included)
Dimensions and warranty:
- 6-3/4"W x 2-1/8"H x 5-7/16"D
- weight: 2 lbs.
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # SS2V70-200W
What's in the box:
- 70V Speaker selector
- Four 2-pin Euroblock connectors (installed)
- Instruction sheet
Thanks for submitting your review
More details on the OSD SS2V70
Overview: The OSD SS2V70-200W speaker selector is designed for commercial 70V applications, providing 2 speaker output zones that can each handle up to 200 watts. Each Zone includes a front-panel On/Off button along with an 11-step attenuation dial.
Front Panel: The SS2V70-200W speaker selector features separate Zone 1 and Zone 2 On/Off buttons that let you independently activate and deactivate each speaker output. Each Zone also includes an 11-step attenuator dial. Both the attenuators and Zone selector buttons are noise-free, eliminating loud pops and clicks when operated.
|10||0dB (Full Volume)|
Rear Panel: The SS2V70-200W includes four removable 2-pin Euroblock (Phoenix) connectors for all wiring connections. Each Euroblock set-screw connection can accommodate speaker wire up to 16-gauge in size.
- Input: A single 2-pin input connector provides the connection from your 70V amplifier.
- Thru: This 2-pin connector provides a direct-out connection that's paralleled to the input, for daisy-chaining additional 70V selectors and speakers.
- Zone1 & 2: Two 2-pin Euroblock connectors provide the Zone 1 and Zone 2 speaker outputs, each capable of handling up to 200 watts.
- Power Handling: 200 Watts (per Zone)
- Frequency Response: 20Hz - 22kHz
- Attenuation: 33dB in 11 steps (10 plus Off)
- Connectors: Euroblock, up to 16-gauge wire
- Dimensions: Width = 5.50", Height = 2.123", Depth = 6.760" (without wire)
- Weight: 3.6 lbs.