Contact us
Close contact box

Alpine PSS-22WRA

Direct-fit complete speaker system for select 2011-18 Jeep Wrangler JK Unlimited models

Item # 500PSS22WR

Good times in your Wrangler Unlimited are about to get better.

Find what Fits your car

Good times in your Wrangler Unlimited are about to get better.

Need help?
Contact our Virginia-based experts.
1-888-955-6000
5 advisors available

Item # 500PSS22WR

Ships free today

In stock
$1,599.95 each
Add to wishlist

About the Alpine PSS-22WRA

A total Alpine upgrade

Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources perfectly suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.
Alpine Authorized Online Dealer

A total Alpine upgrade

Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources perfectly suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.

The sound

Alpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and sound bar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for awesome clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed underseat subwoofer and a Tough Pack mono amp for some whoppin' bass. 

The fit

Alpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations and in the case of the two amps, all wiring is included, complete with factory compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.

READ LESS

Product highlights:

  • compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)
  • package includes:
    • two sets of SPV-65X-WRA 6-1/2" component speakers
    • weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier
    • weather-resistant Tough Pack KTA-30M-WRA mono amplifier with remote bass knob
    • SBV-10-WRA 10" enclosed sub
    • mounting gear, wiring, and connectors
  • included SPV-65X-WRA speakers can be configured for component or coaxial use
  • includes T-harness for getting signal from Jeep radio
  • warranty: 3 years
  • Our 60-day money-back guarantee
  • MFR # PSS-22WRA

What's in the box:

  • This package contains four individually boxed Alpine items including the main box:
  • Main Box:
  • SBV-10-WRA Powered subwoofer
  • 103" Main harness
  • 8' Power cable (inline 60A Maxi-fuse)
  • 8" T-harness
  • Three 10" speaker to RCA adapters
  • Three 3/4" bolts
  • Installation manual
  • Warranty information
  • Amplifier Box:
  • KTA-30F-WRA and KTA-30M-WRA amplifiers pre-attached to the mounting bracket
  • (2) SPV-65X-WRA Component speaker sets each containing:
  • Two 6-1/2" Woofers (attached 6" speaker wire)
  • Two tweeters (attached 6" speaker wire)
  • 2 Crossovers
  • 2 Woofer grilles
  • 2 Tweeter mounting plates
  • Two 12" Sheets of polyfill
  • 2 Alpine logos with adhesive backing
  • Two 1/2" adhesive foam pads
  • Instruction manual
  • Warranty information

Customer reviews

Loading reviews...

Alpine PSS-22WRA reviews

Average review:

11 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

hopefully a warning was added after this review

Crutchfield customer from Murrieta, CA on 9/9/2019

2017 Jeep Wrangler Unlimited

Verified customer (What's this?)
Verified employee purchase (What's this?)

Product came less than a week. Quality and package checks outs good. Instructions were the bare basics on what to do; someone with experience will figure it out. Was almost true about plug and play. My wrangler is a 2017, manual. As of writing this, there is no warning at all online saying that this set up is not compatible with a manual trans. It says its not compatible on the instructions when we already have it in our hands tho. All the speakers and the sub fits like how it normally does, but the amps cant go in the spot described in the instructions because my clutch pedal is in the way. With the way the slimy main harness is set up and how the bracket is formed holding the two amps, it was a bit of a challenge find a spot to HIDE it all, but we managed to get it to work, yet giving us way more time to install. Also the sub wouldn't fit properly so I had to dig up the carpet to move factory wires over to give scoot the sub up to fully put the seat down bass bumps pretty great actually, you could feel it, and the sound is obviously more clear than the factory. had no issues with installing the speakers, was a bit satisfied, but had to take a lot of time to gather and fabricate after spending nearly 2 racks on a "plug and play, but you're playing tetris with the amps to accustom the slimy harness and keep it all hidden, if you have a clutch pedal". I would've rated 1 star for the amount of disappointment of "direct fit" and damage for drilling in car. but it b

Pros: will work if everything is plugged in properly. bass is adjustable and can vibrate vehicle. plug and play is true w/out clutch pedal. came quickly. used factory wiring.

Cons: if you have a manual, you will spend time on making it fit in the vehicle to keep it hidden, main harness doesnt give you much to work with. main harness also came very slimy, not sticky, slimy. may have been warmed for awhile in box; it was everywhere and gross. amp does not come with any adjuster knobs or switches as described online, only one knob for loudness of bass says zipties were included, yet no zipties were found :( did not say it wont fit manual wrangs, hopefully that c

Crutchfield response on

0 of 0 found this helpful

Alpine PSS-22WRA

Crutchfield customer from Roque Bluffs, ME on 8/18/2019

Verified customer (What's this?)
Verified employee purchase (What's this?)

Loud and clear, this system sounds GREAT in my 2014 JK!!

Pros:

Cons:

Crutchfield response on

0 of 0 found this helpful

Frustration install but worth it.

Benjamin A from Evanston, WY on 8/11/2019

2014 Jeep Wrangler Unlimited

Verified customer (What's this?)
Verified employee purchase (What's this?)

I was optimistic about the installation despite other reviews i had read, particularly in regard to the subwoofer/amp installation and setup. I spent probably 2 hours carefully removing the dash panels/gauges/radio/seat etc. (using Crutchfield's instructions since Alpines were very difficult to follow - diagrams where horrible), and installing the wiring harness (which seemed to be wrapped with cloth tape... upside-down so it was extremely gooey and sticky), and all speakers. Long story short, the next 4 hours were spent removing the installed amps from under the dash, turning the gain up (alpine suggest turning the sub amp gain all the way down but thats got to be a mistake - I turned it all the way up), checking continuity and voltages on both amp and sub because it was not working at all, only to finally get frustrated enough to pull the radio out, unplug every connection, blow them out randomly (like maybe there was a small spec of dust in one of them?), plug them all back in.... yanked, tugged, and pulled on the wiring harness (just short of hitting it with a hammer), re-assembled harness and radio... then like magic it finally worked. I adjust everything to my liking and spent just about another hour putting the Jeep back together. Aside from all of that trouble, frustration, and time wasted (small sacrifice) the result was unbelievable (sub is perfectly adjustable with the knob). The system is perfect in my opinion (top on or off). I recommend ***** 5 st

Pros: Great punch with the top on or off. Once the sub amp it properly set you all all the power you need. perfect fit - no need for any modification - plug n play weather resistant

Cons: Install instructions from Alpine were almost worthless Amp for the sub improperly set up (GAIN) The amps were already installed on the bracket and there was no way (without removing them from the bracket) to tell them apart and the harness plugs are identical

Crutchfield response on

0 of 0 found this helpful

Great Sound, Bad Instructions

Crutchfield customer from Howards Grove, WI on 7/10/2019

2015 Jeep Wrangler Unlimited

Verified customer (What's this?)
Verified employee purchase (What's this?)

Delivery was quick (it included some extra clips in a separate box that I never used). Installation took longer than I thought it would, but part of that was on my inexperience. Have one big complaint, not Crutchfield's issue really, but Alpines. I followed the instructions that came inside the Alpine package exactly, including the amp settings 'for best performance set amplifier and subwoofer to recommended settings as shown'. After I had put everything back together, turned on the radio (factory), I had very little bass, very disappointing. Felt I had followed the instructions perfectly. Called Alpine tech for help, described my experience, and got the following reply: 'Oh, is that still in the package? We know the instructions are wrong for the amp settings. Go back and turn up the Gain'. Unbelievable!! They knowingly let people like me use bad instructions and not go in and fix them!! So after tearing apart the dash again, removing the driver speaker and fishing out the amps, I took the covers off and played with the settings until I thought it sounded good, then put everything back together, again (a couple hours wasted). The good news is that the system sounds great (even with the factory 130 unit, depending on the source). It was nice to have everything made specifically for the Wrangler, no messing around with fit.

Pros: Ease of installation, Sound

Cons: Instructions for amp settings that Alpine knows is wrong, but hasn't fixed.

Crutchfield response on

0 of 0 found this helpful

Hell yes

Jonny from Ft Worth, TX on 6/26/2019

2015 Jeep Wrangler Unlimited

Verified customer (What's this?)
Verified employee purchase (What's this?)

I efin love it. I've been building systems and piecing them together for every vehicle I've ever owned. I use to have 2 15" subs in my Tahoe pushing 2300 watts rms. I was very skeptical from the reviews and that's why I'm taking the time to write one. This system is absolutely perfect in my opinion. Great sound surprisingly good bass for the size. It took me about 2.5 hours from start to finish and I love it. It was worth every penny. I would recommend adjusting your amps before installing them. I listen to all types of music so I tested and adjusted a couple times before closing everything up. If you love music and your Jeep doesn't already have the alpine upgrade you should get it. You won't regret it.

Pros: Amazing sound. Complete plug and play

Cons: Directions do suck

Crutchfield response on

1 of 1 found this helpful

Out of the Park!!!

Crutchfield customer from Alamosa, CO on 5/11/2019

Verified customer (What's this?)
Verified employee purchase (What's this?)

Alpine hit it out of the park!!! It doesn't matter what music you listen too, you will be shocked at the Sound coming from your Jeep.

Pros: Unbelievable sound quality that begs for you to take the top of of your Jeep.

Cons: None

Crutchfield response on
Customer review photo

1 of 1 found this helpful

Awsome sound, deep bass!

Crutchfield customer from Fort Wayne, IN on 4/30/2019

2018 Jeep Wrangler Unlimited (JK)

Verified customer (What's this?)
Verified employee purchase (What's this?)

You will definitely want to take your time with this install. I consider myself pretty handy, this install took me a good 8 hours. I have also never installed any car audio equipment. Other reviews online said their subwoofer wouldn't work and when I finished mine, I couldn't get mine to work either! After a little research I decided to take the amps out and adjusted the subwoofer settings and it worked perfectly! There is potential to bend and crimp the wires so you really need to plan your cable routes carefully especially when putting your jeep back together. It would also be beneficial if you had a second person to help you with your passenger seat removal and subwoofer placement. I was able to do the entire install by myself but it did get frustrating. I also suggest you use the 3db wires for your tweeters (comes with the tweeters) as the bass from the woofers can be powerful. The subwoofer really packs a nice punch for only 10". The sound is amazing! Nice deep bass and loud, nicely constructed and truly a plug and play system. No drilling or cutting required on my 2018 JK. Definitely worth the price and time!

Pros: Plug and play Deep bass Completely hidden install Loud DIY Great system for the price

Cons: Time consuming Directions can be hard to decipher

Crutchfield response on

2 of 2 found this helpful

Awesome Product-Terrible Instructions

#PRIM8TEJK8 from Oak Harbor, WA on 3/24/2019

2011 Jeep Wrangler Unlimited

Verified customer (What's this?)
Verified employee purchase (What's this?)

Don't let the bad reviews that are on a few sites fool you. This is a great product. The install instructions are absolutely terrible, but the end result is worth it. Before installing the amps you will need to run all of the wiring and hook up all of the speakers so you can adjust the amps. You cannot make adjustments once the amps are mounted. You will need to mount the amps after removing the front left speaker. The mounting location is direct behind it. The bolt heads will be facing the driver's seat so you cannot install the amps with the left speaker box installed. Also, do not start putting anything back together until the entire install is complete. You will end up backtracking multiple times. I suggest upgrading the head unit along with this system as well. It will improve the overall sound quite a bit and give you better ability to make adjustments after install. I wouldn't call it a competition system, but it's all the bass and sound clarity I would ever put in a wrangler. (See picture to save a ton of time trying to figure out amp mounting)

Pros: Great sound, good thumping bass, weather resistant, clean factory look, factory plug-and-play ready, remote bass knob, sub hides under passenger seat, and does not take up any storage space.

Cons: Terrible Install Instructions

Crutchfield response on

0 of 1 found this helpful

Huge Improvement over stock

Alan from Corydon, IN on 3/8/2019

2017 Jeep Wrangler Unlimited

Verified customer (What's this?)
Verified employee purchase (What's this?)

Sounds great, but the instructions are pretty bad, and the suggested amplifier settings in the instructions did not work for me. The setting suggested on the mono amp would put out absolutely no signal to the sub. Then the suggested audio settings for the radio made the sub sound very weak. The 4 channel amp settings made the component speakers sound weak and flat with the filters on. Once I adjusted everything with the I207 WRA I installed at the same time, it sounds awesome. Don't expect teeth rattling bass, but it is definetly a great, full rounded sounding system.

Pros: Clean install, great sound

Cons: poor instruction, you have to drill a hole in the center console for the remote bass knob, can be tricky installing the amps

Crutchfield response on

1 of 1 found this helpful

Average Alpine

Ted from Spokane, WA on 2/18/2019

2016 Jeep Wrangler Unlimited

Verified customer (What's this?)
Verified employee purchase (What's this?)

I've waited nearly a year for Alpine to ship this product because on paper, it looks like the perfect upgrade for my Wrangler. Finally, a Crutchfield had it in stock and I ordered in with great anticipation. The installation was harder than what was indicated. The instructions are very week when it comes to the amplifier placement and where these need to be mounted. Plus getting the amps in is a pain! In all, probably close to 10 hours just to get this installed. Crutchfield was very willing to help. However, this was such a new product that the technicians were of minimal help. I ended up going to my local Alpine dealer to finish the installation and get it sounding good. The sound quality is definitely better than the factory stereo. But if I had to do it over, I'd probably look at other amplifier options. The sub is average and sounds like it's under powered. The speakers are also average but better than the sub. One reason to go with this setup is the water proofing. But I'd probably look at marine grade stereos next time. Overall, I gave it 3 stars. I took one start away for the installation difficulty and gaps in instructions. I took a second star away since the sub is just average. I wish I could say better things as I'm a big alpine fan.

Pros: Water proof Made specifically for Jeep Wrangler Complete package with wiring harness

Cons: Had to wait for nearly a year for Alpine to ship Average sub with no real kick to a 10" bass A little pricey

Crutchfield response on

3 of 4 found this helpful

Alpine PSS-22WRA

Ryan from Orlanod, FL on 1/17/2019

2016 Jeep Wrangler Unlimited

Verified customer (What's this?)
Verified employee purchase (What's this?)

What a huge difference in sound! Took around 6 hours to install. Was painful at times getting the front speakers installed and getting the amps installed under the dash behind the steering wheel. Great how everything is hidden and waterproof! The sound is great parked, and driving down the turnpike with the top off, the highs and the lows are all fantastic. Well worth purchasing this system if you have the non-alpine system in your Jeep. Have a slight issue with the sub and controls, still not working, but Crutchfield is replacing the parts at no extra cost, just have to take out the middle panel and passenger seat again to re-install. Another reason to purchase from here, is that they stand by the products and great help! Can't say enough how great it is to drive with this system installed. It isn't going to annoy the neighbors, and yet, has plenty of bass, and high end tweets... the sound is phenomenal compared to what came from the factory!

Pros:

Cons:

Crutchfield response on

4 of 4 found this helpful

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Alpine PSS-22WRA

Pat M.

Features & specs

General
Speaker Size Vehicle-specific
Design 0-way
Tweeter Design Dome
Impedance (Ohms) ---
Tweeter Composition Teteron
Woofer Composition Not given
Woofer Surround Not given
Parts Warranty 3 Years
Labor Warranty 3 Years
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts N/A
Frequency Response ---
Minimum RMS Wattage ---
Maximum RMS Wattage 600
Peak Power Handling (Watts) 1200
Top-mount Depth (Inches) N/A
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) ---

Product Research

Overview: Alpine's PSS-22WRA is a dedicated 1200 watt, 9 speaker sound system designed specifically for 2011 - 2018 Jeep Wrangler JK Unlimited vehicles not equipped with a factory Alpine amplified sound system. The Alpine replacement system includes; two compact amplifiers, one 4 x 75 watt RMS amplifier for the four speaker locations; a 300 watt RMS mono amp, driving a 10" subwoofer enclosure; and two sets of SPV-65X-WRA 6-1/2" component speakers. The PSS-22WRA also includes a remote bass knob, for changing the bass level from the dash, along with all the mounting hardware and wiring harnesses necessary for mounting and adapting into the factory system.

Wiring: The PSS-22WRA system can be interfaced with a factory radio (non-amplified) or an aftermarket radio, including Alpine's Restyle headunits. The included T-harness interfaces the factory wiring in the dash, providing either a speaker-level signal from a factory radio or an RCA line-level signal from an aftermarket radio, to feed to the two Alpine amplifiers. The T-harness also feeds the amplified return signal back into the factory wiring and out to each of the speakers, utilizing the factory speaker wires. The provided Main Harness includes a 10 ga. power wire, with inline fuse holder, that gets run to the battery, providing power for both the 4-channel amp and the subwoofer amp. This harness also works in conjunction with the T-harness by providing audio in and out between the radio and both amps. Speaker adapter harnesses are provided for each set of speakers, including the dash tweeters, so no cutting into the factory wiring will be required. Inline high-pass crossovers are provided for both sets of tweeters.

KTA-30F-WRA Amplifier: The KTA-30F-WRA is a 4 channel amplifier providing 75 watts RMS per channel into a 4Ω load. The amp can accept both line-and speaker-level inputs and includes an Auto Turn-on circuit that will activate the amp when it senses a signal on the speaker-level inputs. Connection to the amp is done through a single 26-pin plug off of the main harness. Controls for the 4-channel amp are located underneath a removable metal cover-plate and include:

  • Gain: Adjusts the input signal level
  • Filter: Two 3-way switches, one each for front and rear channels, provide options for High-Pass, Low-Pass, and Off (full range).
  • Crossover Frequency: One dial for each set of channels can be used to adjust the cutoff frequency for those two channels. Each crossover has a range from 50 Hz to 400 Hz.
  • Input: Two switches, common to both sets of channels, include:
    • RCA/SPK: Selects the input signal type
    • 2Ch/4Ch: Selects whether 2 or 4 input channels will be used

KTA-30M-WRA: The KTA-30M-WRA is a 300 watt RMS mono amplifier for powering the 10" subwoofer. Like the 4-channel amp, it can accept either line- or speaker-level inputs and features an Auto Turn-on circuit that will activate the amp when it senses a signal on the speaker-level inputs. An included wired remote lets you easily adjust the bass level from the front seating area. The control can be mounted under a dash panel and gives you a level range from 0 to -20 dB, relative to the gain setting on the amplifier. Controls on the subwoofer amplifier include:

  • RCA/SPK: Selects the input signal type
  • Gain: Used to vary the input level
  • Low Pass Filter: Rotary control that can set the filter cutoff between 50 - 400 Hz
  • Filter: On/Off switch
  • Subsonic: Adjusts the subsonic filter, with a range of 5Hz to 40Hz
  • Bass EQ: Provides a boost at 45Hz, with a range of 0 to +12dB

Subwoofer Enclosure: The Alpine 10" subwoofer enclosure can provide deep accurate bass, while not taking up any usable space in the vehicle. The enclosure is shaped to sit underneath the passenger's seat and is held in place with the factory seat brackets.

SPV-65X-WRA: The Alpine system includes both front and rear component speaker sets featuring 6-1/2" woofers and 1" Teteron tweeters. The two component speaker sets provide full clear sound for front and rear locations, even with the Jeep's top off.

Mounting: Both the 4-channel amplifier and the subwoofer amp come pre-attached to the included mounting bracket, and are designed to fit underneath the driver's side dash panel. The 10-inch subwoofer enclosure gets placed underneath the front passenger side seat and is held in place with the factory seat brackets. The PSS-22WRA is designed so that no usable space in the vehicle is taken up by the sound system. Each of the SPV-65X-WRA 6-1/2" component speaker sets includes hardware for mounting the woofers into the factory locations, both in the dash as well as in the rear soundbar. Both sets of tweeters also include brackets, allowing them to sit in the factory locations, and include a threaded locking collar that allows them to quickly and easily attach to the brackets. The brackets, in turn, mount directly to the factory screw holes used by the factory tweeters.

Loading accessories...

Customer Q&A

6 questions already asked

Q
Is there a way to modify this to make it work in a manual transmission model?
[ Tom March  Sep 16, 2019 ]
1 answer
A
I don't see why it would not work. Wiring for sub runs under center console, might be different for a manual.
[ Jason  Sep 16, 2019 ]
Q
Why wouldn't this alpine pass-22wra fit my 2013 jeep jku with factory alpine sub?
[ MichaelS  Jul 22, 2019 ]
3 answers
A
I misread, If it has the premium sound systems (alpine sub enclosure in the back) then no. If it doesn't have that then yes
[ KAITLIN  Jul 30, 2019 ]
A
Yes, I have a 2014 JKU myself and after research it will fit easily. Mind you this system comes with a sub as well so it would replace your Alpine one or you could keep yours in if needed
[ KAITLIN  Jul 24, 2019 ]
A
It should fit perfectly into the factory locations, and the sound quality is AMAZING even with my top off it like I'm at the Concert in the Front Row in VIP. If I had to rank it out of 5 stars it 6 STARS, ALPINE knocked it out of the park. Perfectly designed for the Jeep Adventure Top on or Top off you will have high quality sound for what ever music you would like to listen too. The only issue you will have is the sub location in the back of your 2013 JK will be wasted space because the sub is installed under the Passenger seat.
[ JON  Jul 22, 2019 ]
Q
Do the amps come with their RCA connections in tact or have they been modified to connect to a factory head unit? I have an aftermarket Pioneer and want to know of it will work with this kit.
[ Brian  Mar 24, 2019 ]
4 answers
A
It comes with RCA adapters that plug into the harness so it will definitely work with aftermarket head units. Hope this helps
[ Philip  Mar 27, 2019 ]
A
They have been modified to connect to the factory head unit. It was truly plug and play, at times was very hard to get under the dash and mount the cables under the steering wheel column where the amps go, but all the cables were direct connect from the 2 amps into the factory non alpine head unit.
[ Ryan  Mar 27, 2019 ]
A
They do! There are also YouTube videos that show the install
[ Amie  Mar 24, 2019 ]
A
It comes with 1 complete wire harness kit for everything. The part the goes to the head unit has rca adapters that plugs into the harness wiring.
[ Alan  Mar 24, 2019 ]
Q
I have seen a few reviews state that the system did not come with a remote bass adjustment knob, and the amp/sub did not work properly. Does the system now come with the dash mount bass knob, and have issues with the subwoofer functioning been resolved?
[ Jeeper  Mar 18, 2019 ]
3 answers
A
I checked the manual and seen that it does come with a remote bass knob. Typically, Alpine gear works properly, but no company is perfect. We have so few issues from their gear that we trust them. But as with all the gear we carry, we offer technical support for setup and troubleshooting too that can help you with any issues that come up. My Bio: https://www.crutchfield.com/bio/Paul
[ Paul  Apr 02, 2019 ]  Staff
A
Mine did come with a remote bass knob and it seems fine to me
[ Travis  Mar 27, 2019 ]
A
My system did come with the amp/sub bass knob, but did not work properly, so called crutch filed, and they sent a part to fix, that part didn't fix it, so called back, and they actually sent me a whole new system, so I did the troubleshooting one part at a time, and it wasn't the bass knob that was the issue for me, it was the sub. After I replaced the sub it worked perfect.
[ Ryan  Mar 27, 2019 ]
Q
Will this fit in a 2 door? I realize not all the speakers are compatible but some are. The dash tweeters and roof speakers would work right??
[ Andrew  Jan 20, 2019 ]
1 answer
A
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Jan 22, 2019 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP