Chat
Contact us
Close contact box
Happy Thanksgiving
Our Advisors are off today for the Thanksgiving holiday. Back tomorrow with expert advice and great recommendations!
Connect ID #
428 756 563 3
Connect ID #
428 756 563 3
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

Our contact center is currently closed.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Alpine PWE-S8

Compact 120-watt powered 8" subwoofer

Item # 500PWES8

Don't have the space for a big subwoofer enclosure, but still want the thrill of sub-bass? At only 3" deep,...

Don't have the space for a big subwoofer enclosure, but still want the thrill of sub-bass? At only 3" deep,...

California customers:
Please click here for your Proposition 65 warning.

Ships free

Out of stock

$299.95 -$29.25 Outlet savings

$270.70

Other options

About the Alpine PWE-S8

Big sound from a small box

Don't have the space for a big subwoofer enclosure, but still want the thrill of sub-bass? At only 3" deep, Alpine's PWE-S8 powered subwoofer fits in all kinds of tight spaces: in the trunk of your car, behind the seat in your pickup, or even under the seat in some cars. And it's made to stand up to life on the road, with its rugged cast metal enclosure that's built to take the hard knocks of a tight installation while protecting your equipment.
Alpine Authorized Online Dealer

Big sound from a small box

Don't have the space for a big subwoofer enclosure, but still want the thrill of sub-bass? At only 3" deep, Alpine's PWE-S8 powered subwoofer fits in all kinds of tight spaces: in the trunk of your car, behind the seat in your pickup, or even under the seat in some cars. And it's made to stand up to life on the road, with its rugged cast metal enclosure that's built to take the hard knocks of a tight installation while protecting your equipment.

In the box

Alpine PWE-S8 side view

At only 3" deep, the PWE-S8 can fit almost anywhere.

Alpines uses a Class D amplifier rated at 120 watts RMS to drive the PWE-S8's 8" shallow-mount, high-excursion subwoofer, so there's plenty of power for your bass. The amp features controls for phase, gain, and a low-pass crossover, so you''ll be able to match the bass up to the rest of your system.

You'll also find an input for a wired remote control that lets you dial in your sound from the driver's seat. Easy-access RCA line-level inputs and speaker-level inputs with automatic turn-on make it easy to integrate this sub into almost any system. The PWE-S8 has everything you need to bring bass to places where there was never the room for boom.

READ LESS

Product highlights:

  • powered subwoofer with cast metal enclosure
  • 8" woofer high-excursion cone
  • built-in Class D amplifier (120 watts RMS/240 watts peak)
  • frequency response: 32-150 Hz
  • variable low-pass crossover (80-200 Hz)
  • variable phase control (0-180 degrees)
  • preamp- and speaker-level inputs
  • dimensions: 13-1/2"W x 9"H x 3"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # PWE-S8

What's in the box:

  • Amplified enclosure with one 8" subwoofer installed
  • 12" Wiring harness (Power with in-line fuse holder/ Ground/ Remote turn-on/ Speaker level input)
  • Two 15 amp ATO fuses (one installed in the power wire fuse holder/ 1 spare)
  • Remote level control with 15' cable attached (3.5mm mini-plug on the end)
  • Adhesive backed hook and loop mounting fasteners (to mount the remote)
  • 4 Mounting brackets
  • Eight 5/8" Pan head self-tapping screws
  • Eight M4x7.5mm Machine screws
  • Owner's manual (English/ French/ Spanish)
  • Warranty information
  • On-line product registration information
  • System installation notice

Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

See the difference between "Open Box" and "Scratch & Dent" Outlet items

Customer reviews

Loading reviews...

Alpine PWE-S8 reviews

Average review:

57 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Alpine PWE-S8

Pat M.

Features & specs

General
Enclosure Type Sealed
Finish Material Cast Aluminum
Grille Steel
Connector Type RCA/Harness
Bi-amp Inputs No
Woofer Size (inches) 8
Woofer Material Poly/Aluminum
Passive Radiator ---
Width 13-7/16"
Height 2-7/8"
Depth 9-1/16"
Second Depth N/A
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Frequency Response 25-152
Amplifier Power (RMS) 120 watts
Maximum Wattage 240 watts
Sensitivity N/A
Impedance N/A
Second Voice Coil Impedance N/A
Crossover Point 50-150

Product Research

Features

Auto Turn-on: If using the speaker level input, an automatic circuit turns the amplifier on when it senses an input signal. When using the line level inputs you must also use a remote turn on lead.

Note: No wiring is included with the the powered subwoofer. A 10 ga. amp wiring kit is recommended and must be purchased separately.

Low Pass Filter: The amp has a built-in low-pass filter, variable from 50 to 150 Hz.

Speaker Level Input: A speaker level input harness is included, making it easier to add the amplifier to a factory radio or to a receiver with no preamp outputs.

Wired Remote: Using the included wired remote you can easily adjust the bass output level from the driver's seat (or wherever you mount the remote). The range is 0 to -20 dB, relative to the gain setting on the subwoofer chassis.

Controls:

  • Gain: rotary control; 0.2-4.0 volts line level; 0.5-10 volts speaker level
  • Low Pass Filter: rotary control; 50-150 Hz
  • Phase: two position switch; 0° or 180°
  • Power Mode: two position switch; SP IN (speaker level input, auto sensing) or REM (wired remote turn-on)

Connections:

  • Harness: the included 12" harness contains power (+12 volts), ground, remote turn-on, and speaker level inputs (left and right)
  • RCA: left and right line level inputs
  • Remote: 3.5mm mini-jack for use with the included wired remote

Dimensions:

  • Width: 13.4"
  • Height: 2.875"
  • Depth: 9.062"

Loading accessories...

Customer Q&A

33 questions already asked

Q
If i hooked this up to sub output on deck can i leave bass control knob unplugged and adjust bass through the deck?
[ andy  Nov 17, 2020 ]
1 answer
A
I would not do that it it's not very loud and I'm adjusting the bass all the time with the bass knob
[ ABEL  Nov 17, 2020 ]
Q
Will this unit work well with a basic stock radio?
[ Steve  Aug 29, 2020 ]
1 answer
A
It requires RCA inputs, so you would need a speaker out to RCA adapter or converter if your stock radio has not RCA outputs.
[ Daniel  Sep 04, 2020 ]
Q
What wiring accessories are needed to connect to boss head unit?
[ Scott  Jul 26, 2020 ]
1 answer
A
I installed a Kenwood ILX 650 head unit. The sub plugs directly into the rca outputs from the head.
[ DAVID WAYNE  Jul 26, 2020 ]
Q
I have a power wire ran to my 4 channel amp that powers my speakers. Would I have to run a second power wire from the battery to power this sub/amp?
[ Casey  Jun 25, 2020 ]
2 answers
A
If you think the power wire can handle it, you may be able to get away with adding a power block first and then a shorter wire to each amp.
[ JUAN P  Jul 04, 2020 ]
A
Yes that's what I had to do for the 1997 Jaguar XK8. The power must come directly from the battery but the on off power is wired to the main amp that separately powers the 4 channels.
[ Mark  Jul 03, 2020 ]
Q
If I mount in the trunk of my vehicle under the deck lid facing downwards, will the base reach the interior of the vehicle?
[ Justin  May 18, 2020 ]
3 answers
A
It will, not the best location but I installed this in the hatch area in a CRV and it was plenty loud
[ johnny  May 18, 2020 ]
A
I wish I knew. I mounted mine on the floor under the bench seat of my single cab pickup. It is amazing but then again I'm not a 21 year old rapper. For my purpose it is fantastic.
[ BRIAN L  May 18, 2020 ]
A
I am sure it will! It thumps good enough to where it makes the mirrors vibrate...granted, I turn my volume up high and I have it under my seat where it fits perfectly. I recommend you install it inside the vehicle vs in the trunk though. My 2 cents...
[ Jesus  May 18, 2020 ]
Q
is there a mounting bracket for driver's seat for a 2010 Jeep JK unlimited?
[ William  Oct 29, 2019 ]
1 answer
A
The Jeep brackets are only included if you get the -swa model number. Otherwise there are some brackets but they're not specific for any vehicle.
[ Jeffrey  Oct 29, 2019 ]
Q
is there a mounting bracket for driver's seat for a 2010 Jeep JK unlimited?
[ William  Oct 29, 2019 ]
1 answer
A
There is not a vehicle specific bracket for your vehicle. It does come with brackets for mounting it to the floor board though.
[ Calvin  Nov 08, 2019 ]  Staff
Q
Hello Team Crutchfield, do you have records if this Alpine box will fit under the seat of my toyota tacoma 2011? Its a 4 cil 4x4 extr cab Thank you
[ Cuauhtemoc  Oct 05, 2019 ]
1 answer
A
We do not have measurements of under seat areas. You should get in touch with one of our advisors, we can help you take some measurements and determine fitment! :)
[ Calvin  Oct 16, 2019 ]  Staff
Q
I lost the bass remote control, it's possible to order one from crutchfield?
[ jorge  Sep 15, 2019 ]
1 answer
A
Unfortunately, it is not. That would be something you would have to reach out to Alpine directly for.
[ Calvin  Sep 25, 2019 ]  Staff
Q
Does this need a mount or bracket to secure it under the seat?
[ Lorenzo  Aug 09, 2019 ]
2 answers
A
No it doesn't. Heavy duty Velcro works great to keep this secure (which I believe it comes with).
[ Kadell  Aug 09, 2019 ]
A
I didn't and although I don't drive very crazy anymore it hasn't been a problem. Just moves slightly.
[ ERIC L  Aug 09, 2019 ]
Q
Does this have a crossover that will limit the frequency sent to the speakers? i.e. all frequency under say 150hz is handled by the sub then the upper frequencies sent to the speakers?
[ Chris  Jun 25, 2019 ]
1 answer
A
Hello. The controls on this unit are for the sub only. A high pass crossover for your car's speakers will be at your head unit if so equipped with such features. Hope this helps.
[ JUAN P  Jun 26, 2019 ]
Q
I have a alpine 80 watts ×4 would this sub easy to connect to the amp?
[ Rachid  May 20, 2019 ]
4 answers
A
Yes, I have a smaller Alpine 50 watt x4 amp in my dash and it worked just fine.
[ Dale  Jun 07, 2019 ]
A
This sub comes with an amp built in. It has both the normal wired channel connectors or the RCA connectors too.
[ Jeffrey  Jun 03, 2019 ]
A
I have not hooked it up yet. Still putting the interior together then I will wire radio , speakers, subs and amps. I dont plan on hooking subs up to amp. I plan on wiring them directly to the radio.
[ Douglas  Jun 02, 2019 ]
A
This sub is powered already. Does not need another separate amp
[ JOHN  Jun 01, 2019 ]
Q
Can you wire rear speakers direct to powered sub woofer?
[ Clifford  Mar 22, 2019 ]
4 answers
A
I can't answer for sure. I powered my speakers off of a separate AMP
[ Gary  Mar 22, 2019 ]
A
I believe so. Wiring diagram shows wiring to all four speakers though. Also without leads for sub use only you'll have to adjust the gain manually.
[ Robert  Mar 22, 2019 ]
A
Didn't consider trying that. All of the speakers are separate from the subwoofer.
[ PAUL A  Mar 22, 2019 ]
A
I believe the answer is "no." I did not do the installation personally, but I studied the wiring harness & electrical connections. I think any direct connection to another set of speakers would be unconventional and not work.
[ Alan  Mar 22, 2019 ]
Q
Can you use two of these?
[ Tim  Jan 01, 2019 ]
3 answers
A
I suppose you could, but it all depends on the wiring. Each one of these powered subs connects via a pair of RCA cables to a preamp output (and a multiple wire pigtail). And these low-profile subs are a compromise from the start. If I had a system in my car that was so serious that I wanted two subwoofers, I would not be looking at these little powered units. Hope that helps.
[ Alan  Jan 09, 2019 ]
A
I think you can!
[ Carmen  Jan 08, 2019 ]
A
If you are using RCA output, yes you could, you would have to run separate power to both. Would not recommend two if you are using speaker level outputs. You will need a splitter off deck RCA inputs, you will need 4 total.
[ Darin  Jan 07, 2019 ]
Q
Can I purchase only the accessories that comes with this compact subwoofer?
[ Liane  Nov 27, 2018 ]
2 answers
A
If you're asking about the Crutchfield sub wiring kit, yes. I used that to connect everything together.
[ RX4U2  Nov 28, 2018 ]
A
I believe Crutchfeild can sell similar components individually. They may not be Alpune.
[ Douglas  Nov 27, 2018 ]
Q
Would this fit under driver seat of a 2018 sienna?
[ Llama is here  Nov 14, 2018 ]
5 answers
A
You need to measure to be sure. It is very compact and puts out excellent bass for the small size. Fits nicely under driver seat of 2014 Nissan Armada.
[ ERIC L  Nov 15, 2018 ]
A
You'll never know until you measure. Height of unit is ~3". LxW dimensions are too large to fit between the anchor points of the seats in my Subaru Outback. BTW, I've been disappointed in the performance. I know it's small and just provides fill, but I thought it would have more kick. My previous powered sub did have that kick, but the sound was fuzzy, not tight.
[ Alan  Nov 15, 2018 ]
A
you have to measure the space under the seat and compare it to the specifications of the unit. - might work better under one of the rear passenger seats
[ johnny  Nov 15, 2018 ]
A
I haven't driven a Sienna in over five years. I would caution putting the sub under the driver seat. Especially if you have powered seat. Look for a better location and the sub will serve you well.
[ Dale  Nov 15, 2018 ]
A
I installed under driver seat of a Mazda 6 without a problem.
[ MARK  Nov 15, 2018 ]
Q
Would this fit under driver seat of a 2018 sienna?
[ Llama is here  Nov 14, 2018 ]
2 answers
A
Maybe if your vehicle does not have power seats You may wanna consider under the rear seats
[ Richard  Nov 15, 2018 ]
A
I purchased this sub to go under the seat of a 1973 Jeep CJ5. We had to use some small spacers, but, it fit beautifully and sounds awesome. I have since sold the Jeep, but I would buy this product again should the need arise. I can't help you with the Sienna. I don't know anything about that particular car.
[ Scott  Nov 15, 2018 ]
Q
How much is involved in installing the Alpine PWE-S8 in a '15 Ford Super Duty Super Cab, when it comes to wiring it up to the factory CD/AM/FM stereo? Also, suggested location (maybe under passenger front seat) of this unit?
[ Ken  Aug 28, 2018 ]
1 answer
A
We have a great article on installing a powered subwoofer in the "Learn" section of the main Crutchfield website here: https://www.crutchfield.com/learn/video-installing-powered-subwoofer.html For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx
[ Ryan  Sep 05, 2018 ]  Staff
Q
Would this fit in one of the compartments under the rear seat of a 2008 Dodge Ram 1500 quad cab?
[ Aaron  Aug 23, 2018 ]
2 answers
A
Don't know about your application but it will fit under the back seat of a 2010 Jeep Liberty.Enter
[ Barrie  Aug 28, 2018 ]
A
Not sure how much room there is in a dodge but this fits great in a Chevy Silverado under the rear seat
[ Richard  Aug 24, 2018 ]
Q
Can I run it off my 2018 Siverado head unit? Does it fit under backseat of the smaller double cab?
[ Bryan  Feb 08, 2018 ]
2 answers
A
Yes and Yes
[ Gary  Mar 22, 2019 ]
A
There is definitely a way to connect this to the stock radio in your pickup and you can call an advisor on 1-800-324-9695 to get a personal recommendation on the gear that is needed to make it connect to the stock radio. There may be an issue fitting it under the seat. Given the measurements we got, I don't think it will. You might call the advisor while at the truck to double check our measurements and see if it can fit My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101
[ Paul  Feb 12, 2018 ]  Staff
Q
Will it fit under the front passenger seat of a 2003-2009 4runner?
[ John  Nov 06, 2017 ]
2 answers
A
It does fit snugly under the front passenger seat of my 2009 Frontier.
[ Daniel  Sep 04, 2020 ]
A
We do not have the available space dimensions under the seat of your vehicle. We can provide the dimensions of the Alpine enclosure which you can use to cross-reference against the available space you find there: 13-1/2"W x 9"H x 3"D At just 3" thick, you will not need a lot of clearance.
[ Ryan  Nov 11, 2017 ]  Staff
Q
Can this be used in a 2011 silverado with the factory head unit?
[ Tony  Nov 04, 2017 ]
1 answer
A
Yes, you will have to use the included harness to tap into the rear speakers for signal and then run power and ground to the unit.
[ Joshua  Nov 04, 2017 ]
Q
Will this sub fit under the seat of a 2011 Miata?
[ Michelle  Oct 08, 2017 ]
3 answers
A
Based on all of the information I've been able to find on various Miata enthusiast sites, the 3rd gen Miatas don't have enough vertical clearance under the seats for an under-seat subwoofer. Most people mount them on the vertical wall behind the seats instead, at least in earlier Miatas (that's where I have the sub in my 1991).
[ Andrew  Dec 07, 2017 ]
A
I'm afraid we don't have the area under the seats listed in the research for your 2011 Mazda Miata. However, when flat the Alpine PWE-S8 measures 13-1/2"(depth) x 9"(width) x 3"(height)--if you find there's sufficient room under your seats for a box with those dimensions, the Alpine would be a great option. For more details or to discuss further, please feel free to contact an Advisor directly by phone (888.955.6000) or online chat. Thanks!
[ Larry  Oct 11, 2017 ]  Staff
A
I don't know much about the Miatas, but the measurements of the subwoofer are the w 9.5 inches L 13.5 inches and the height 2.75 inches. If this measurements are under the seat it will be a fit. Performance wise I do recommend it.
[ Ruben  Oct 09, 2017 ]
Q
Does anyone have this in a Subaru hatch back? Anyone listen to death metal ? How's the double bass drum kicks? Also can it handle hip hop bass? I know it's not gonna rock the house. Just wanted to fill in the lows.
[ wayne  May 20, 2017 ]
2 answers
A
fills the lows nicely as I have this installed in the hatch area of a CRV and it sounds good!!
[ johnny  May 18, 2020 ]
A
Installed mine in my gmc 2500 hd behind rear seat. I had to turn my sub settings on head unit to max for great results. I listen to all types of music. Also when I say great results, it's just a "comfortable" bass level. To really bring out low ends I would need two or something bigger.
[ George  May 20, 2017 ]
Q
Has anyone connected this to an existing amp? I have a SONY and Kenwood Head Unit. This would fit perfectly in my Jeep Wrangler under seat. Would this connect directly to AMP or head unit?
[ BillD  May 02, 2017 ]
7 answers
A
If you are hooking it to stock radio you need a loc. I haven't heard about hooking it directly to and amp.
[ Ruben  May 06, 2017 ]
A
It connects to the sub port on the head unit for signal and on-off, and to a 12-v source for power
[ Chris  May 03, 2017 ]
A
You need to connect it directly to the head unit. It has a built in amp and connecting to an existing amp may damage the unit.
[ Stephen  May 03, 2017 ]
A
Sorry, the speakers in my 99 Suburban would not support an amp. However the sound is awesome now. Really nice bass sub...
[ JERRY  May 03, 2017 ]
A
I have connected this to a factory head unit using speaker level inputs: it has rca connections for line level, I plan on putting a 50 watt alpine amp on the system in order to keep factory head unit. This amp should pair nicely with the power of this alpine sub- all in a 2016 Prius.
[ MICHAEL  May 03, 2017 ]
A
Sony what? and Kenwood what?
[ JULIO  May 03, 2017 ]
A
It will connect directly to your head unit, provided you have the RED/WHITE output on your head unit. Since it is an amp, it won't connect to another amp.
[ LYNN  May 03, 2017 ]
Q
Best way to wire up and use two of these in a vehicle?
[ Taylor  Apr 20, 2017 ]
2 answers
A
I wired each one using a 4-gauge dual amplifier wiring kit and put the fuse block on my firewall. I ran two #10's to the fuse block and then ran a #4 to my battery.
[ Douglas  Dec 22, 2019 ]
A
Not sure about two as I only installed one. I ran power down one side and speaker down the other side of vehicle. Speaker is located behind rear seat of crew cab. Good luck!
[ David  Apr 22, 2017 ]
Q
I have seen this amp in a jeep magazine. It comes with a wire harness that is plug and play with a stock jeep radio. You unplug the current wire harness and plug in the amp harness then the current one plugs into the back of that. Do you have this harness?
[ Robert  Feb 20, 2017 ]
1 answer
A
Thanks for your question. Unfortunately we do not have the harness separately. I have added the link below for the full package which includes everything you need and is plug n play as you describe. If you have any questions feel free to reach out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. https://www.crutchfield.com/p_500PWES8WR/Alpine-PWE-S8-WRA.html?tp=113&skipvs=Y
[ Kenny  Feb 20, 2017 ]  Staff
Q
Does this fit under rav4 2015-17 passenger seat?
[ Steevvee  Jan 18, 2017 ]
3 answers
A
I put mine under a 2005 Honda Accord Coupes seat. The only issue I had was in the length of the unit. I had a heating duct the pushed the unit back so that it extended past the bottom of the seat (just barely). I think the RAV's seat is a bit larger and sits up higher than the Accord's seat, so it should be fine. I would check under the passenger seat to see if there are any obstructions. I also had to place the unit inboard so that the seat adjuster cleared. I had plenty of clearance on the sides, so this was no problem.
[ Mark  Jan 20, 2017 ]
A
I don't know. I don't have a RAV4. Try measuring the space under the seat and checking the dimensions.
[ ROBERT S  Jan 19, 2017 ]
A
I would say most likely yes. I bought one and fit it behind my 2 seater 1985 Nissan 300zx behind the passenger seat and the seat still goes back all the way and reclines all the way back. Great little powered subwoofer. Not huge thump but very good bass sound. You won't be disappointed. Hope this helps you. Randy
[ Randy  Jan 19, 2017 ]
Q
Would this product fit under the back seat or front seat of a 2016 GMC Canyon? The Canyon has the Bose 6 speaker system. But, I want to upgrade the speakers to all Alpine with a subwoofer, if possible. Thank you for your advice.
[ David  Sep 25, 2016 ]
2 answers
A
Yes it will. No problem
[ Gary  Mar 22, 2019 ]
A
I Have never looked under the seat of a canyon, it is very small and I put mine dead center under the rear seat in my 05 gmc 4 door half ton truck with all alpine system, I love it. Sounds incredible,
[ dale  Sep 27, 2016 ]
Q
Can this be used to replace the pioneer subwoofer under the passenger seat of a 1999 Lexus RX300?
[ gp99RX300  Jun 03, 2016 ]
1 answer
A
This is for all of the available compact subs, I would recommend to contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle, compare the different subs available and give you the details on if they will fit and what you will need for an installation in your vehicle.
[ Kenny  Jun 03, 2016 ]  Staff
Q
can this be mounted vertically? I want to make a frame out of mdf so that this will be vertical. My design will be thoughful, but i wanna know if theres any thing against mountng this vertical.
[ luis  Nov 29, 2015 ]
2 answers
A
Yes sir you can. I have mine mounted vertically behind the passengers seat in my 1985 300zx. It is a great little unit. You won't go hopping down the road from the bass but plenty of quality thump for its size.
[ Randy  Dec 14, 2015 ]
A
I did not mount mine vertically but mechanically, there doesn't seem to be any reason that one couldn't do so. If it was my install, I'd just be sure to allow for adequate ventilation.
[ Gerald  Dec 02, 2015 ]
Q
i have a 2013 jeep wrangler with a stock audio system. how would this wire into the vehicle? any help is appreciated.
[ ski  Feb 05, 2015 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Feb 06, 2015 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP