Contact us
Close contact box

Alpine R-W10D2

R-Series 10" subwoofer with dual 2-ohm voice coils

Item # 500RW10D2

For those who like it loud, Alpine salutes you! Their legendary R-Series subwoofers are made to bring powerful...

For those who like it loud, Alpine salutes you! Their legendary R-Series subwoofers are made to bring powerful...

California customers:
Please click here for your Proposition 65 warning.

Need help?
Contact our Virginia-based experts.
1-888-955-6000
5 advisors available

Item # 500RW10D2

Ships free

In stock
$229.95 each

Other options

Add to wishlist

About the Alpine R-W10D2

Maximum bass output

For those who like it loud, Alpine salutes you! Their legendary R-Series subwoofers are made to bring powerful bass to just about any vehicle. The R-W10D2 10" sub features a cone made from Kevlar® treated pulp — the same material used to make bulletproof vests — while its durable Santoprene™ surround allows for huge amounts of excursion. Alpine built this sub for bassheads who want the best of both worlds: accurate response and otherworldly thump.

Maximum bass output

For those who like it loud, Alpine salutes you! Their legendary R-Series subwoofers are made to bring powerful bass to just about any vehicle. The R-W10D2 10" sub features a cone made from Kevlar® treated pulp — the same material used to make bulletproof vests — while its durable Santoprene™ surround allows for huge amounts of excursion. Alpine built this sub for bassheads who want the best of both worlds: accurate response and otherworldly thump.

Bring on the power

The R-W10D2 can handle up to 750 watts RMS, so be sure to choose a suitable amplifier as these bass monsters definitely want lots of power. Its dual oversized 2-ohm voice coils offer wiring flexibility you'll appreciate as your system changes and grows, so you can always pull maximum power from your amp. It works well in sealed and ported enclosures so you can choose what kind of bass you want to hear and feel.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.

To drive this single subwoofer, we recommend a mono amplifier rated between 560 and 1125 watts RMS at 1 or 4 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.

READ LESS

Product highlights:

  • 10" subwoofer with dual 2-ohm voice coils
  • Kevlar reinforced pulp cone with HAMR Santoprene rubber surround
  • frequency response: 26-200 Hz
  • power handling: 750 watts RMS (375 watts per coil)
  • peak power: 2250 watts
  • top-mount depth: 5-7/8"
  • grille not included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # R-W10D2

What's in the box:

  • One 10" Dual 2-ohm voice coil subwoofer
  • 1 Rubber concealing ring (installed)
  • Two 3" jumper cables (each has a single banana connector on each end)
  • R-Series Subwoofer Application Guide (English/ French)
  • On-line product registration information (English/ French/ Spanish)
  • Warranty information (English/ French)
  • Important Notice! (English/ French)

Customer reviews

Loading reviews...

Alpine R-W10D2 reviews

Average review:

3 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

High performance, exceptional quality, precise

Crutchfield customer from Honolulu, HI on 4/21/2019

Verified customer (What's this?)
Verified employee purchase (What's this?)

Bought this to replace my blown re audio sub and the performance and sound is much better than my previous 10" sub. Albeit I do have it wired to 1000w @1ohm, it handles it very well, and the performance is outstanding. Very clean, precise, and powerful. The build quality is exceptional and I appreciate the wiring connectors that are provided free to parallel wire the sub. Overall I am extremely satisfied with this sub and will consider alpine again for future sub purchases.

Pros: Precise, powerful, hits deep

Cons: A bit heavy, but to be expected of such quality materials. Only matters because my car is so light

Crutchfield response on

0 of 0 found this helpful

Alpine R-W10D2

Crutchfield customer from Webster, MN on 1/21/2019

Verified customer (What's this?)
Verified employee purchase (What's this?)

Fast shipping sounds great

Pros:

Cons:

Crutchfield response on

0 of 4 found this helpful

Great all around sub

Crutchfield customer from MD on 6/23/2018

2017 Ford Focus

Verified customer (What's this?)
Verified employee purchase (What's this?)

Great sub with tons of potential. I can only say good things about it. 0 complaints.

Pros: Great Accuracy and power! (In a ported box made to Alpine specs)

Cons: May spoil you with SQ and SPL

Crutchfield response on

6 of 6 found this helpful

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Alpine R-W10D2

Pat M.

Product Research

Features
Enclosure Compatibility

Features

Kevlar Reinforced Pulp Cone: This Alpine R-Series subwoofer has a parabolic, Kevlar reinforced pulp cone. Kevlar adds strength and tear resistance to the woofer cone while maintaining the benefits of a pulp cone design. There is also an inverted polypropylene/mica/talc dust cap, which increases rigidity.

HAMRS: The woofer features a High Amplitude Multi Roll Surround (HAMRS), made of rubber, that allows a large linear excursion and greater SPL. The HAMRS design allows extreme excursions without sacrificing valuable cone area.

Progressive Spider: The progressive spider has reinforced layer tinsel leads to ensure reliable and consistent control of the tinsel leads and eliminate any mechanical noise or interference often seen in high excursion cone designs.

Compound Radius Curve Pole Geometry: Alpine's Patented Compound Radius Curve pole geometry ensures a symmetrical magnetic field, while optimizing flux density to reduce distortion and further improve power handling and output.

Oversized Voice Coil: The oversized (65mm), high-temperature, 4-layer dual voice coils increase the sub's power handling.

Dual Voice Coils: For system flexibility, the woofer has two 2Ω voice coils. When the voice coils are wired in parallel, the woofer presents a 1Ω load; when wired in series, the woofer presents a 4Ω load.

Spring Terminals: The spring post terminals are all located on one side of the woofer. The terminals will accept bare wire up to 8 gauge, pin connectors, or single banana plugs.

Jumpers: Included with the woofer are two voice coil terminal jumpers. These jumpers allow you to easily wire the voice coils in parallel (for a 1Ω load) or series (for a 4Ω load).

Enclosure Compatibility

Sealed Box Volume: The recommended sealed box volume ranges from 0.48 cubic feet to 0.93 cubic feet, with 0.58 cubic feet being the ideal size. (The volume in the manual is given as net, before accounting for the displacement of the subwoofer when installed.)

Ported Box Volume: The recommended ported box volume ranges from 1.03 cubic feet to 1.58 cubic feet. The ideal size is 1.3 cubic feet, using a slot port measuring 10" (Width) x 1" (Height) x 17" (Length). (The volume in the manual is given as net, before accounting for the displacement of the subwoofer and slot port.)

Loading accessories...

Customer Q&A

1 question already asked

Q
I want to get the most out of these subs but I dont have a crossover calibrator so wondering what is roughly the best hz to run dual parallel 10d2s at 1 ohm or is it just personal preference?
[ Kyle  Jul 31, 2018 ]
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.
[ Krissy  Aug 05, 2018 ]  Staff

Loading articles...

TOP